x700 re install dash
Results 1 to 2 of 2

Thread: x700 re install dash

  1. Top | #1
    wild oats's Avatar
    Join Date
    May 2018
    Last Online
    03-13-2019 @ 08:31 AM
    Location
    hilton ny
    Posts
    12
    Thanks
    1
    Thanked 1 Time in 1 Post

    x700 re install dash

    ...Hopeful someone has had this issue, I just rebuilt the tilt mechanism (bushings)..easy ...
    Now the hardest part is getting slack for the plastic cruise control and parking brake levers back on, I cannot get any slack on the "rods" that go to the frame to get the screws in them on the dash. I even tried pushing the brake on too.....then I unhooked the frame side, got the handle on ..now still cannot hook that end up either.
    Any advise here would be great... thanks !
    Last edited by wild oats; 12-18-2018 at 07:26 AM.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    wild oats's Avatar
    Join Date
    May 2018
    Last Online
    03-13-2019 @ 08:31 AM
    Location
    hilton ny
    Posts
    12
    Thanks
    1
    Thanked 1 Time in 1 Post
    .. got this Demon by moving /staring the machine..They must of been hung up before removing everything, Weird one for sure.
    Anyhow The Tilt steering issue the upper and lower bushings replacemet solved the loose Steering Wheel....

  4. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •