John Deere GT262 PTO Clutch Question
Results 1 to 2 of 2
Like Tree1Likes
  • 1 Post By ExperimentalMechanic

Thread: John Deere GT262 PTO Clutch Question

  1. Top | #1

    Join Date
    Jul 2019
    Last Online
    07-10-2019 @ 02:01 PM
    Thanked 0 Times in 0 Posts

    John Deere GT262 PTO Clutch Question

    Hello ladies and gents,

    I just picked up a 93' Deere GT262 with snowblower, bagger and 48" deck for a fair deal. The tractor knowingly needed a clutch upon purchase. After some highly rated reviews, i purchased an Extreme Mower Clutch from Ebay.

    I did not realize there was a specific orientation that this clutch needed to be faced in in order to work correctly (The instructions for the clutch say something about the coil facing the engine and CW vs CCW installation.) Not abiding by this can blow the clutch immediately.

    I am wondering if anyone has some pictures or insight into the installation of this new clutch. I am planning on:

    -Cleaning the shaft thoroughly.
    -Using light anti-seize on the shaft.
    -Loctite on the 5/8 bolt head with washer (Cup facing toward clutch)
    -Approx 45lbs of torque on the 5/8 bolt.

    From what i can remember during de-installation of old clutch, there was some bolted L shaped rods on the tractor frame that positioned the clutch in a certain way, i am wondering in which of the three openings on the clutch should these be oriented?

    If anyone has an easy way of locking the shaft while tightening, i would love to hear also!

    Thanks so much for any help.

  2. Remove Advertisements

  3. Top | #2

    Join Date
    May 2017
    Last Online
    Today @ 05:12 AM
    SE Wisconsin
    Thanked 26 Times in 19 Posts
    See attachment.
    Attached Files Attached Files
    rtgt likes this.

  4. Remove Advertisements


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts