GX335 power steering slop
Results 1 to 3 of 3

Thread: GX335 power steering slop

  1. Top | #1
    Trebor's Avatar
    Join Date
    Nov 2018
    Last Online
    Yesterday @ 08:31 PM
    Location
    St. Joseph, MI
    Posts
    42
    Thanks
    0
    Thanked 20 Times in 13 Posts

    GX335 power steering slop

    I've got about a 1/4 turn play in the steering on my GX335. There is no play from the wheel to the steering box. It all seems to be from the pump to the cylinder. No cylinder reaction for a 1/4 turn. Any thoughts on correcting the problem? I sure would like to mow in straight lines again.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    May 2017
    Last Online
    Today @ 04:51 AM
    Location
    SE Wisconsin
    Posts
    111
    Thanks
    1
    Thanked 29 Times in 22 Posts
    Sounds like the bolt holding the piston to the end of the shaft in the steering cylinder is loose. ND Industries Epoxy-Lock was used on the threads and I have seen them come apart in the past.

  4. Top | #3
    Trebor's Avatar
    Join Date
    Nov 2018
    Last Online
    Yesterday @ 08:31 PM
    Location
    St. Joseph, MI
    Posts
    42
    Thanks
    0
    Thanked 20 Times in 13 Posts
    Thanks for the advice. You were correct EM! The bolt had loosened up, easy fix. Thanks again.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •