I just recently purchased an X534 4 wheel steer tractor and I'm having difficulty installing the rear weight bracket (Part BM24011) on the tractor. The weight bracket is designed so that you need to assemble the bracket 1st, then secure two bolts / spacers to the bottom left and right frame of the tractor which the bottom of the bracket pivots on and then you install 2 clevis pins (left and right) on the upper rear frame to hold the top part of the bracket in place. The problem is that on the left side of the rear frame there's a bolt and nut sticking out that's used on a bracket which helps secure the rear wheel steering rods and as a result the weight bracket cannot be slid and pinned in to place on the rear frame as referenced in the assembly instructions. As you'd expect the instructions mention nothing about having to deal with the existing bolt / nut sticking out of the rear frame. Does anyone on the forum here have experience with this issue or know what the solution is ?