X300 no drive to engine pulley
Results 1 to 3 of 3

Thread: X300 no drive to engine pulley

  1. Top | #1

    Join Date
    Aug 2012
    Last Online
    08-04-2012 @ 10:35 AM
    Location
    west sussex
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    X300 no drive to engine pulley

    Help anyone, my JD X300 was working fine and then the belt came off. I refitted it exactly as the diagram on the deck. I started it up, pulled up the PTO button but the main pulley does not rotate/engage hence the blades don't turn. Pulling up the PTO button doesn't engage the pulley. is there a re-set button or is it more major.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    has15's Avatar
    Join Date
    Jul 2011
    Last Online
    01-03-2014 @ 09:49 PM
    Location
    Jerome, Michigan, United States
    Posts
    554
    Thanks
    60
    Thanked 39 Times in 33 Posts
    What was the cause of the belt to come off? Did it happen while you were mowing? If so my guess would be the electric blade clutch... I'm sure someone will be along with more possibilities. Good luck.
    Jeff


    2012 X540
    Rim Guard loaded rear tires
    48'' Snow Plow with Angle Kit
    52''X24'' Lawn Roller

  4. Top | #3
    Tomfive's Avatar
    Join Date
    Dec 2011
    Last Online
    Yesterday @ 04:17 AM
    Location
    Mid-Hudson Valley, NY
    Posts
    4,116
    Thanks
    97
    Thanked 603 Times in 469 Posts
    Just a WAG , as I'm not familiar with your X300, but can you test the clutch? Assuming it's an electric clutch, did the belt coming off knock the connector/wires loose/off?

    Good luck.
    Tom

    2011 1026R/R4's -- H120 FEL/49" -- 260 BH/12" -- Bro-Tek Ripper -- Artillian Forks/42" -- 244 lbs JD Rear Wheel Weights -- KBOH Hooks and Clevis' --
    Block heater -- 180* T-stat -- Evans HP Waterless Coolant

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Late styled B Pulley Bearing Question
    By JoeMauderly in forum Johnny Poppers
    Replies: 0
    Last Post: 07-01-2012, 10:58 PM
  2. pulley
    By liftedtrucks4me in forum Lawn & Garden Tractors
    Replies: 4
    Last Post: 06-17-2012, 04:13 PM
  3. Belt drive deck vs shaft drive deck
    By Brian in forum Lawn & Garden Tractors
    Replies: 6
    Last Post: 05-01-2012, 06:00 AM
  4. LA11O 19.5 HP BRIGGS engine pulley and bolt removal
    By charlie in forum Lawn & Garden Tractors
    Replies: 1
    Last Post: 12-06-2011, 07:20 PM
  5. D110 vs X300
    By luxury1 in forum Lawn & Garden Tractors
    Replies: 2
    Last Post: 07-23-2011, 02:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •