2019 2025r Hydostatic Pedal Return
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
Like Tree34Likes

Thread: 2019 2025r Hydostatic Pedal Return

  1. Top | #1

    Join Date
    May 2013
    Last Online
    Yesterday @ 09:49 PM
    Location
    Connecticut
    Posts
    19
    Thanks
    2
    Thanked 3 Times in 3 Posts

    2019 2025r Hydostatic Pedal Return

    Hope everyone is doing well! Been a member of this forum for some time and hoping our community can provide some insight on new Deere Hydrostatic Pedals.

    I have just received delivery of my new 2025R (very excited and put 2 hours on it over the weekend)! I've noted doing some "necessary" reorganization of the garage with the forks on the loader that the forward travel pedal does not quickly return back to "neutral" when you let your foot off. If you release your foot from the pedal it takes about 2 or 3 seconds for the pedal to return back to the neural position stopping forward motion of the machine.

    Is this normal that the forward pedal is a bit sluggish to return to the neutral detent stopping motion? Mind you, my 655 will give you whiplash if i remove my foot quickly from the pedal - quite the learning curve on the new machine with forks on the loader doing precision work. Wondering if the dampener on the linkage on my new 2025R is faulty.

    Thanks in advance!
    1986 John Deere 655 MFWD, 54-Inch Mid-Mount Mower, 47-Inch Two-Stage Snowblower

    2019 John Deere 2025R, 120R Loader, 54-Inch AutoConnect Mower, 54-Inch Two-Stage Snowblower, iMatch Ballast Box

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 06:54 PM
    Location
    Central New York
    Posts
    10,835
    Thanks
    1,824
    Thanked 1,465 Times in 1,199 Posts
    My '18 2025R is about a second or two, never timed it, my 1023 was about the same. To me it's normal, but when I get on my FIL's 16 yr old BX 2200 it's that same whiplash feeling you are referring too with your 655.
    BigJim55 likes this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  4. The Following User Says Thank You to PJR832 For This Useful Post:

    JDeere655 (03-11-2019)

  5. Top | #3

    Join Date
    May 2013
    Last Online
    Yesterday @ 09:49 PM
    Location
    Connecticut
    Posts
    19
    Thanks
    2
    Thanked 3 Times in 3 Posts
    Quote Originally Posted by PJR832 View Post
    My '18 2025R is about a second or two, never timed it, my 1023 was about the same. To me it's normal, but when I get on my FIL's 16 yr old BX 2200 it's that same whiplash feeling you are referring too with your 655.
    Thanks very much - glad to know I'm not the only one! I'll try lubing up the linkages this weekend to see if there's any improvement to help my learning curve. Seems that Deere has made some changes in the last 33 years, but I'll never part with my 655....
    BigJim55, PJR832 and goat704! like this.
    1986 John Deere 655 MFWD, 54-Inch Mid-Mount Mower, 47-Inch Two-Stage Snowblower

    2019 John Deere 2025R, 120R Loader, 54-Inch AutoConnect Mower, 54-Inch Two-Stage Snowblower, iMatch Ballast Box

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    12dbsinad's Avatar
    Join Date
    May 2018
    Last Online
    Today @ 12:14 AM
    Location
    New England
    Posts
    185
    Thanks
    1
    Thanked 12 Times in 11 Posts
    I'll second what Pat said. I have the same machine as him and it does the same, I'd say about a second or so... certainly not instant.

    It's normal. You're good
    BigJim55 and PJR832 like this.
    2018 2025R, R4, 120R Loader, 260B backhoe, 60D AutoConnect MMM, Independent Deck Lift, 5' Tarter Rotary Cutter

  8. Top | #5
    Herminator's Avatar
    Join Date
    Mar 2017
    Last Online
    Today @ 12:32 AM
    Location
    Northern Illinois
    Posts
    3,776
    Thanks
    1,667
    Thanked 797 Times in 605 Posts
    It seems wrong to me. One of the reasons I do not mow in low with my 2038r is when I take my foot off the forward it has been known to skid the tires stopping.
    Welcome to Intermission.

    2017 2038R, 400, 3020 & HPX and thingies to hook to the them.
    112 - Sold in July 2017 but took me until November to admit I just cast it out into this cruel world.
    #compactfarmer

  9. Top | #6
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 04:23 PM
    Location
    New York
    Posts
    33,847
    Thanks
    5,697
    Thanked 3,887 Times in 2,864 Posts
    Quote Originally Posted by Herminator View Post
    It seems wrong to me. One of the reasons I do not mow in low with my 2038r is when I take my foot off the forward it has been known to skid the tires stopping.
    I agree. Maybe the Torsional Damper (#2) is bad or a spring is missing.
    https://partscatalog.deere.com/jdrc/...pgId/155851248
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD, The Wife
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  10. Top | #7
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 06:54 PM
    Location
    Central New York
    Posts
    10,835
    Thanks
    1,824
    Thanked 1,465 Times in 1,199 Posts
    Quote Originally Posted by Gizmo2 View Post
    I agree. Maybe the Torsional Damper (#2) is bad or a spring is missing.
    https://partscatalog.deere.com/jdrc/...pgId/155851248
    I'll have to look into this, been this way since new and seems right in line with my 1023, thank Keith.
    Herminator likes this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  11. Top | #8
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Yesterday @ 06:54 PM
    Location
    Central New York
    Posts
    10,835
    Thanks
    1,824
    Thanked 1,465 Times in 1,199 Posts
    Quote Originally Posted by Herminator View Post
    It seems wrong to me. One of the reasons I do not mow in low with my 2038r is when I take my foot off the forward it has been known to skid the tires stopping.
    Quote Originally Posted by Gizmo2 View Post
    I agree. Maybe the Torsional Damper (#2) is bad or a spring is missing.
    https://partscatalog.deere.com/jdrc/...pgId/155851248
    Look at minute 9:40, when I switch pedals, this tractor has always been like this. If this is not right like I said, I'll have it looked at.
    Herminator likes this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  12. Top | #9
    HomesteadJoe's Avatar
    Join Date
    Mar 2017
    Last Online
    08-12-2019 @ 08:27 PM
    Location
    Southwestern Connecticut
    Posts
    1,556
    Thanks
    139
    Thanked 275 Times in 198 Posts
    My 2 cents on this subject.... Ask yourself about the question of liability attached to having a control on a piece of machinery where the intent is to STOP the machine from moving forward when you release the pedal, yet it does not STOP for some measurable amount of time. I highly doubt the well-intended engineers at JD actually designed it to "wait a while and then stop" after you let your foot off the pedal. That is a liability suit waiting to happen!

    I have the same experience as Herminator with my 2038R... I let my foot off the gas and the rear tires skid on the lawn/dirt.

    For what its worth...

    Sincerely
    greenharley likes this.
    BadAss 2038R, R3s, R4s, Spacers, Eng & Xmission Heaters, LEDs, Cages, Fender Flares, Front Fenders, iMatch, Heavy Hitch, Hitch-N-Can, 800# Quick Tach Weights, 220R Loader, 57" HD Bucket, Tooth Bar, Single Point Hyd, 55" Wicked Root Rake Grapple, WR Long 3rd Function Hyd, 270B Backhoe, 72D MMM, Front 3 pt Hitch, 366 FMB Blade, PHD300 Post Hole Digger with Auger Set, LR2172 Landscape Rake w/gage Wheels, RB2072 Rear Blade, BB2072 Box Blade, AP12F Pallet Forks, EA 72" Pine Needle Rake, Fit-Rite TNT

  13. Top | #10
    HomesteadJoe's Avatar
    Join Date
    Mar 2017
    Last Online
    08-12-2019 @ 08:27 PM
    Location
    Southwestern Connecticut
    Posts
    1,556
    Thanks
    139
    Thanked 275 Times in 198 Posts
    Quote Originally Posted by PJR832 View Post
    Look at minute 9:40, when I switch pedals, this tractor has always been like this. If this is not right like I said, I'll have it looked at.
    Look where at Minute 9:40?

    Sincerely
    Gizmo2 and Herminator like this.
    BadAss 2038R, R3s, R4s, Spacers, Eng & Xmission Heaters, LEDs, Cages, Fender Flares, Front Fenders, iMatch, Heavy Hitch, Hitch-N-Can, 800# Quick Tach Weights, 220R Loader, 57" HD Bucket, Tooth Bar, Single Point Hyd, 55" Wicked Root Rake Grapple, WR Long 3rd Function Hyd, 270B Backhoe, 72D MMM, Front 3 pt Hitch, 366 FMB Blade, PHD300 Post Hole Digger with Auger Set, LR2172 Landscape Rake w/gage Wheels, RB2072 Rear Blade, BB2072 Box Blade, AP12F Pallet Forks, EA 72" Pine Needle Rake, Fit-Rite TNT

  14. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. 2019 Ford Ranger
    By dieselshadow in forum Trucks, Trailers, & Towing
    Replies: 87
    Last Post: 12-30-2018, 07:24 AM
  2. 2320 / 2025R 4WD Lever and Differential Pedal Extenstions
    By Kennyd in forum Ken's Bolt on Grab Hooks
    Replies: 40
    Last Post: 10-19-2018, 05:34 PM
  3. 2025R Backhoe Hydraulic Return Line ?
    By Truk in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 2
    Last Post: 10-09-2018, 06:57 PM
  4. GT262 Brake Pedal return Spring
    By prg999 in forum Lawn & Garden Tractors
    Replies: 0
    Last Post: 08-13-2016, 05:12 AM
  5. Today's incident, 2025R pedal stuck, ran into garage door.
    By fjernigan in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 6
    Last Post: 07-02-2015, 12:09 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •