4210 e hydro Drive Solenoid
Results 1 to 5 of 5

Thread: 4210 e hydro Drive Solenoid

  1. Top | #1

    Join Date
    Aug 2018
    Last Online
    04-23-2019 @ 04:16 PM
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    4210 e hydro Drive Solenoid

    I have no movement and a long 3 short code, found the forward solenoid shorted to ground. Has anyone found an aftermarket alternative for these, hard to fork out $400 for a coil. HydraForce coils look real close in pictures. And there less than $50

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Feb 2019
    Last Online
    Yesterday @ 09:01 PM
    Location
    N. FL
    Posts
    188
    Thanks
    4
    Thanked 30 Times in 26 Posts
    Have not run into this on my JD yet but I did the 4WD coil on my NH backhoe. NH wanted $550 for a new solenoid and didn't sell the coil separate. I got the name off the coil itself and found an exact replacement less the plug for $15.

    As long as the specs and size match any coil should work.
    John Deere 4310 tractor, New Holland 575E backhoe, John Deere F725 mower

  4. Top | #3

    Join Date
    Aug 2018
    Last Online
    04-23-2019 @ 04:16 PM
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks, I'll post a PN if i find one for future reference.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Feb 2019
    Last Online
    Yesterday @ 09:01 PM
    Location
    N. FL
    Posts
    188
    Thanks
    4
    Thanked 30 Times in 26 Posts
    The coil on my NH matched a PDL12 made by Delta Power. Here is their page with coil size info. You might find something that matches there. http://www.delta-power.com/cartridge...s/coils/coils/

    They actually had the exact plug in coil for my backhoe but it listed at $115. For a $100 difference I didn't mind splicing my plug onto a compatible coil. If you find a coil in their listings that will work just search the internet for that part number and you may find one on the cheap like I did.
    Last edited by Old Machinist; 03-27-2019 at 11:12 AM.
    John Deere 4310 tractor, New Holland 575E backhoe, John Deere F725 mower

  7. Top | #5

    Join Date
    Aug 2018
    Last Online
    04-23-2019 @ 04:16 PM
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I had to heat gun the paint off the sticker but it's
    ch-09603-002 magnet schultz america. The numbers not pulling up in there catalog so i emailed them.

  8. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. 4210 e hydro pto not working
    By bmg901 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 10
    Last Post: 07-17-2018, 07:33 AM
  2. 4200- no voltage to fuel shutoff solenoid- Not thermistor or solenoid. What else?
    By BIF1 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 10
    Last Post: 07-24-2016, 02:34 AM
  3. 4310 Fuel Solenoid Control Module and Fuel Shutoff Solenoid
    By rlayton4 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 4
    Last Post: 04-30-2016, 04:27 PM
  4. 4210 Drive Problem
    By bbarnes42 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 9
    Last Post: 09-25-2015, 02:20 PM
  5. 4210 E-Hydro light
    By jchadwi in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 6
    Last Post: 09-22-2011, 11:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •