Hydraulic noise
Results 1 to 9 of 9
Like Tree13Likes
  • 1 Post By dadtoandrew
  • 2 Post By PJR832
  • 2 Post By dadtoandrew
  • 1 Post By PJR832
  • 2 Post By dadtoandrew
  • 3 Post By xcopterdoc
  • 1 Post By PJR832
  • 1 Post By dadtoandrew

Thread: Hydraulic noise

  1. Top | #1

    Join Date
    Jan 2018
    Last Online
    Today @ 07:06 AM
    Location
    Woodstock, ON
    Posts
    152
    Thanks
    0
    Thanked 18 Times in 11 Posts

    Hydraulic noise

    Good Morning,

    Anyone else experience what I would almost call a whine coming from the hydraulics when they're not using them?

    Last night when I had the FEL on moving some brush and raking up, when I was done moving the bucket to where I wanted it, there sounded to be a whine coming from under the seat, mostly on the right hand side. When I moved the loader controls the noise went away, doesn't matter which direction I move the controls. Seems to be more prevalent at lower RPMs, but the noise is still there but much less obvious at a higher RPM (2000+). To me it almost sounds like the noise when you're using your hydraulics and you reach the end of the range of travel on your cylinders, almost like a bypass or something?

    I can't remember if it is making this noise when I don't have the FEL on, and just the MMM...I will be able to check in a couple of weeks when the grass is ready for its 1st cut.

    Fluids are good and clear, just rolled over 40 hours last night.

    Thanks,
    Kevin.
    greenharley likes this.
    2018 2025R
    120R FEL
    54D AutoConnect MMM
    47" Snow Blower
    42" HLA Pallet Forks

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 11:13 PM
    Location
    Central New York
    Posts
    11,600
    Thanks
    1,938
    Thanked 1,594 Times in 1,309 Posts
    There was a thread not so long ago about a DTAC for the new 2025R regarding a piece of rigid hydraulic pipe that they replace with a soft line and that takes care of it. I have the same thing, I guess I've either become tone deaf to it or have just gotten used to it. But I've been meaning to ask my dealer, might do that today since you brought it up, I'm stopping later to buy a Stihl chainsaw.
    greenharley and dadtoandrew like this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  4. Top | #3

    Join Date
    Jan 2018
    Last Online
    Today @ 07:06 AM
    Location
    Woodstock, ON
    Posts
    152
    Thanks
    0
    Thanked 18 Times in 11 Posts
    Thanks Pat. I dont rememeber seeing that here but it must be in here somewhere. I will have my dealer check when it is there next

    Won't be disappointed with the chainsaw, had mine out last night. I have the MS181, didnt need anything bigger for my needs. Like a hot knife through butter with a sharp chain!

    Kevin.

    Sent from my SM-G960W using Tapatalk
    greenharley and PJR832 like this.
    2018 2025R
    120R FEL
    54D AutoConnect MMM
    47" Snow Blower
    42" HLA Pallet Forks

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 11:13 PM
    Location
    Central New York
    Posts
    11,600
    Thanks
    1,938
    Thanked 1,594 Times in 1,309 Posts
    Quote Originally Posted by dadtoandrew View Post
    Thanks Pat. I dont rememeber seeing that here but it must be in here somewhere. I will have my dealer check when it is there next

    Won't be disappointed with the chainsaw, had mine out last night. I have the MS181, didnt need anything bigger for my needs. Like a hot knife through butter with a sharp chain!

    Kevin.

    Sent from my SM-G960W using Tapatalk
    Looking at the MS 170, $159.99 right now at my JD dealer. Just need a small saw for storm clean up and a few other things like that.
    greenharley likes this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  7. Top | #5

    Join Date
    Jan 2018
    Last Online
    Today @ 07:06 AM
    Location
    Woodstock, ON
    Posts
    152
    Thanks
    0
    Thanked 18 Times in 11 Posts
    I was originally going to get that one, but upgraded to the 181 only because of the spikes that go into the log are metal on the 181, but were plastic on the 170. Either way you wont be disappointed at all!

    Good price that same model up here is 289, but because they have on sale its down to 199 here.

    Kevin.

    Sent from my SM-G960W using Tapatalk
    greenharley and PJR832 like this.
    2018 2025R
    120R FEL
    54D AutoConnect MMM
    47" Snow Blower
    42" HLA Pallet Forks

  8. Top | #6
    xcopterdoc's Avatar
    Join Date
    Jan 2012
    Last Online
    Yesterday @ 11:52 PM
    Location
    nc
    Posts
    1,687
    Thanks
    214
    Thanked 905 Times in 338 Posts
    When the hyd start making noise, drop the 3pt down slightly. If the noise stops then your 3pt hitch feed back rod is out of adjustment. It is not allowing the hitch hyd spool to return to neutral. This will heat up the fluid in quick order. Check it out.
    The MS170/180 are nice little saws. Ifvya want to make it better, replace the standard 16" bar, 3/8pico low profile, .043 chain with a 14 inch bar, with an .050 3/8 yellow chain. Really awakens this little saw.

    Sent from my LGL52VL using Tapatalk
    greenharley, PJR832 and trboxman like this.

  9. Top | #7
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 11:13 PM
    Location
    Central New York
    Posts
    11,600
    Thanks
    1,938
    Thanked 1,594 Times in 1,309 Posts
    Quote Originally Posted by xcopterdoc View Post
    The MS170/180 are nice little saws. Ifvya want to make it better, replace the standard 16" bar, 3/8pico low profile, .043 chain with a 14 inch bar, with an .050 3/8 yellow chain. Really awakens this little saw.

    Sent from my LGL52VL using Tapatalk
    Yes sir, same thing my salesman told me when I was on my way out.



    Sent from my iPhone using Tapatalk
    greenharley likes this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  10. Top | #8

    Join Date
    Jan 2018
    Last Online
    Today @ 07:06 AM
    Location
    Woodstock, ON
    Posts
    152
    Thanks
    0
    Thanked 18 Times in 11 Posts
    Quote Originally Posted by xcopterdoc View Post
    When the hyd start making noise, drop the 3pt down slightly. If the noise stops then your 3pt hitch feed back rod is out of adjustment. It is not allowing the hitch hyd spool to return to neutral. This will heat up the fluid in quick order. Check it out.
    Sent from my LGL52VL using Tapatalk
    I'll have to check the 3PH next time and see if the noise goes away. I'm going to have to see if I can find info on the feed back rod and adjusting it. Something you can do yourself?

    Kevin.
    PJR832 likes this.
    2018 2025R
    120R FEL
    54D AutoConnect MMM
    47" Snow Blower
    42" HLA Pallet Forks

  11. Top | #9

    Join Date
    Jul 2018
    Last Online
    Today @ 11:29 PM
    Location
    US
    Posts
    52
    Thanks
    2
    Thanked 7 Times in 4 Posts
    Quote Originally Posted by dadtoandrew View Post
    I'll have to check the 3PH next time and see if the noise goes away. I'm going to have to see if I can find info on the feed back rod and adjusting it. Something you can do yourself?

    Kevin.
    I tried that in my 2025r and it didn't go away. It's like a constant whine/buzz/hum from the right rear. It's not the power beyond as I checked and reconnected that a few times.

    Is there a dtac number?

    Sent from my Pixel 2 using Tapatalk

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. JD 6310 hydraulic oil pressure and noise
    By MrsArchijs in forum Utility Tractors
    Replies: 13
    Last Post: 05-15-2017, 03:18 AM
  2. JD 6310 hydraulic oil pressure and noise.
    By MrsArchijs in forum Hydraulics
    Replies: 1
    Last Post: 08-03-2016, 06:27 AM
  3. Noise coming from under seat, hydraulic noise
    By relaytech in forum Sub Compact Utility Tractors (SCUT)
    Replies: 20
    Last Post: 04-10-2016, 07:38 PM
  4. 6105D hydraulic noise
    By mullins62 in forum Utility Tractors
    Replies: 3
    Last Post: 01-31-2015, 10:05 PM
  5. 1026 Hydraulic pump noise
    By Goodscout in forum Sub Compact Utility Tractors (SCUT)
    Replies: 2
    Last Post: 07-13-2012, 07:58 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •