Adjustable Lift Link for 2nd gen 2025r 3 pt?
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
Like Tree28Likes

Thread: Adjustable Lift Link for 2nd gen 2025r 3 pt?

  1. Top | #1

    Join Date
    Feb 2019
    Last Online
    Today @ 07:36 AM
    Location
    Des Moines, Iowa
    Posts
    41
    Thanks
    17
    Thanked 2 Times in 2 Posts

    Adjustable Lift Link for 2nd gen 2025r 3 pt?

    I've been reading some GTT threads about how to get some additional lift height on my limited Cat 1 on the 2nd gen 2025R. One option is to replace the fixed left lift-link with an adjustable one. I'm looking at Green Parts Direct part list for my 2025R and the adjustable lift link they show does not look like the one on my tractor. The parts diagram shows a adjustable link with some additional holes where it can attach to the lift arm. Mine only has one hole. I'm curious if other 2025R owners have a right adjustable lift link like the one shown or if your lift link only has a single hole at the bottom where it attaches to the lift arm. Sorry I don't have any pictures of mine, but the parts diagram is shown below.
    Attached Thumbnails Attached Thumbnails Screen Shot 2019-05-02 at 7.05.22 AM.png  
    Yank likes this.
    2025R Gen 2
    60D MMM and 120R FEL
    Z535R
    Frontier RT1149 Tiller
    Frontier CA2048E Aerator
    Frontier BB2048L Box Blade
    Artillian Diverter
    EA Wicked 55" Grapple
    Heavy Hitch Front/Rear weight bracket
    Incredibly supportive wife (items not listed in priority order)

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 08:09 AM
    Location
    Central New York
    Posts
    11,580
    Thanks
    1,936
    Thanked 1,591 Times in 1,306 Posts
    The part # is LVA22575

    And yes it helps, I have two adjustable links on mine, although I find that most of the time I leave them pretty much where they would be with the fixed link.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  4. The Following 3 Users Say Thank You to PJR832 For This Useful Post:

    Gizmo2 (05-05-2019), North585 (06-22-2019), stevenmc001 (05-02-2019)

  5. Top | #3

    Join Date
    May 2017
    Last Online
    Today @ 07:54 AM
    Location
    Louisiana
    Posts
    2,501
    Thanks
    514
    Thanked 377 Times in 301 Posts


    Pat aka PJR832 can prolly help. I know he has both links adjustable.
    PJR832 and Yank like this.
    LGM= Little Green Machine!!
    2018 2025TLB


    BB2048L Box blade.
    Imatch quick hitch
    AV20F grapple
    Artillian diverter kit
    3pt tractor receiver hitch
    LR2060L Landscape Rake
    LP1060L Land Plane
    Homemade quick attach forks . http://www.greentractortalk.com/foru...uild-soon.html
    *Please Lord give me the strength to add to this list when my wife isn’t paying attention*

  6. The Following User Says Thank You to Littlegreenmachine For This Useful Post:

    stevenmc001 (05-02-2019)

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4

    Join Date
    Mar 2018
    Last Online
    06-25-2019 @ 09:01 PM
    Location
    New Hampshire
    Posts
    95
    Thanks
    38
    Thanked 10 Times in 9 Posts
    Quote Originally Posted by stevenmc001 View Post
    I've been reading some GTT threads about how to get some additional lift height on my limited Cat 1 on the 2nd gen 2025R. One option is to replace the fixed left lift-link with an adjustable one. I'm looking at Green Parts Direct part list for my 2025R and the adjustable lift link they show does not look like the one on my tractor. The parts diagram shows a adjustable link with some additional holes where it can attach to the lift arm. Mine only has one hole. I'm curious if other 2025R owners have a right adjustable lift link like the one shown or if your lift link only has a single hole at the bottom where it attaches to the lift arm. Sorry I don't have any pictures of mine, but the parts diagram is shown below.
    The link shown is for a Gen1 2025R. Not sure it would fit your Gen2. Make sure you have the correct tractor on Green Parts Direct.

    Thumper
    2025R (Gen 1), 220 FEL with 53" bucket, Edge Tamers, Artillian 36" pallet forks, 72" County Line Rear Blade, 54" OnRamp MMM, 14bu MCS with powerflow, Ken's Bolt-On Hooks/Clevis combo, Heavy Hitch 2" receiver / double weight bracket, 16 suitcase weights.

  9. Top | #5
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 08:09 AM
    Location
    Central New York
    Posts
    11,580
    Thanks
    1,936
    Thanked 1,591 Times in 1,306 Posts
    Quote Originally Posted by ThumperACC View Post
    The link shown is for a Gen1 2025R. Not sure it would fit your Gen2. Make sure you have the correct tractor on Green Parts Direct.

    Thumper
    The part # for the Gen1 2025R is LVA803669, I gave him the correct part #.
    Littlegreenmachine likes this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  10. Top | #6
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 07:51 AM
    Location
    Central Pennsylvania
    Posts
    10,267
    Thanks
    371
    Thanked 1,700 Times in 1,287 Posts
    Quote Originally Posted by PJR832 View Post
    The part # for the Gen1 2025R is LVA803669, I gave him the correct part #.
    The adjustable link for a Gen-2 2025R is (LVA22575) as stated above.


    18 - Lift Link

    Part Number
    LVA22575

    Qty Req
    1


    Attached Thumbnails Attached Thumbnails LVA22575.jpg  
    Last edited by jgayman; 05-05-2019 at 09:22 AM.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  11. Top | #7
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 08:09 AM
    Location
    Central New York
    Posts
    11,580
    Thanks
    1,936
    Thanked 1,591 Times in 1,306 Posts
    Quote Originally Posted by PJR832 View Post
    The part # is LVA22575

    And yes it helps, I have two adjustable links on mine, although I find that most of the time I leave them pretty much where they would be with the fixed link.
    deleted post
    Last edited by PJR832; 05-05-2019 at 09:53 AM.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  12. Top | #8

    Join Date
    Mar 2018
    Last Online
    06-25-2019 @ 09:01 PM
    Location
    New Hampshire
    Posts
    95
    Thanks
    38
    Thanked 10 Times in 9 Posts
    Quote Originally Posted by PJR832 View Post
    The part # for the Gen1 2025R is LVA803669, I gave him the correct part #.
    Nice!! That will help him get the right one. The pictured one is for my tractor (Gen1).

    Thumper
    PJR832 likes this.
    2025R (Gen 1), 220 FEL with 53" bucket, Edge Tamers, Artillian 36" pallet forks, 72" County Line Rear Blade, 54" OnRamp MMM, 14bu MCS with powerflow, Ken's Bolt-On Hooks/Clevis combo, Heavy Hitch 2" receiver / double weight bracket, 16 suitcase weights.

  13. Top | #9
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 08:09 AM
    Location
    Central New York
    Posts
    11,580
    Thanks
    1,936
    Thanked 1,591 Times in 1,306 Posts

    Adjustable Lift Link for 2nd gen 2025r 3 pt?

    Quote Originally Posted by ThumperACC View Post
    Nice!! That will help him get the right one. The pictured one is for my tractor (Gen1).

    Thumper
    He was already given the correct part #, it has been ordered and for all I know the OP already has it. We spoke through PM.
    Last edited by PJR832; 05-05-2019 at 03:53 PM.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  14. Top | #10
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 07:51 AM
    Location
    Central Pennsylvania
    Posts
    10,267
    Thanks
    371
    Thanked 1,700 Times in 1,287 Posts
    Quote Originally Posted by PJR832 View Post
    He was already given the correct part #, it has been ordered and for all I know the OP already has it. We spoke through PM.
    Agree. I was just following up with the parts illustration for anyone else who may stumble upon this thread.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Adjustable 3 pt lift arm
    By Hiwire in forum Implements & Attachments
    Replies: 7
    Last Post: 07-26-2019, 06:00 PM
  2. 2nd gen 2032R Cab Suggestion - Easiest to remove
    By mrfleck in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 5
    Last Post: 03-10-2019, 11:48 AM
  3. 2nd gen. 2025r Height measurement needed.
    By ChrisandKorena in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 8
    Last Post: 07-24-2018, 01:33 PM
  4. John Deere 970 Adjustable Lift Link
    By ohtrkyhntr in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 5
    Last Post: 03-25-2015, 06:39 PM
  5. Adjustable top link for 3-pt
    By sstlaure in forum Sub Compact Utility Tractors (SCUT)
    Replies: 8
    Last Post: 05-18-2014, 07:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •