Gen 1 2025R 4 wheel drive indicator
Results 1 to 4 of 4
Like Tree2Likes
  • 2 Post By BigJim55

Thread: Gen 1 2025R 4 wheel drive indicator

  1. Top | #1
    crna's Avatar
    Join Date
    Mar 2016
    Last Online
    11-19-2019 @ 05:40 AM
    Location
    Northwestern, Ohio
    Posts
    144
    Thanks
    10
    Thanked 28 Times in 20 Posts
    The 4 wheel drive indicator light keeps flashing while I am driving. Took the rear wheel off and looked at the switch. There is no adjustment possible. Anyone else have this issue? And, if so, how did you fix it?
    2015 2025R, H130 Loader, 62D mower deck, 270A backhoe, 48 inch JD Roto Tiller, 47 inch JD snow blower, 48 inch King Kutter rough cut mower

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 06:01 PM
    Location
    New York
    Posts
    34,909
    Thanks
    5,979
    Thanked 4,103 Times in 3,025 Posts
    It probably won't take much of an adjustment, seems to be plenty of bolts that may have some free play in them.

    Click image for larger version. 

Name:	MFWD.jpg 
Views:	38 
Size:	55.0 KB 
ID:	690354
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  4. Top | #3
    crna's Avatar
    Join Date
    Mar 2016
    Last Online
    11-19-2019 @ 05:40 AM
    Location
    Northwestern, Ohio
    Posts
    144
    Thanks
    10
    Thanked 28 Times in 20 Posts
    Quote Originally Posted by Gizmo2 View Post
    It probably won't take much of an adjustment, seems to be plenty of bolts that may have some free play in them. [IMG class=inlineimg]https://www.greentractortalk.com/forums/images/smilies/dunno.gif[/IMG]


    Click image for larger version. 

Name:	MFWD.jpg 
Views:	38 
Size:	55.0 KB 
ID:	690354
    Thanks Gizmo, but I have already had it apart, as stated in the OP. The bolts are in specific holes. There is no adjustability.
    2015 2025R, H130 Loader, 62D mower deck, 270A backhoe, 48 inch JD Roto Tiller, 47 inch JD snow blower, 48 inch King Kutter rough cut mower

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 07:21 PM
    Location
    Schellsburg, PA
    Posts
    11,346
    Thanks
    3,083
    Thanked 1,433 Times in 1,126 Posts
    Quote Originally Posted by crna View Post
    Thanks Gizmo, but I have already had it apart, as stated in the OP. The bolts are in specific holes. There is no adjustability.
    my 2520 back when it was around 3 yrs old had trouble with that switch too. but there is a small adjustment to the switch. but after messing with it for what seemed the 100th time, igot mad and bought a new switch--been A-OK since-going on 10 yrs now.

    replace the switch
    Gizmo2 and balrog006 like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •