2038r Controls question and SVC/Power Beyond ports questions
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
Like Tree5Likes

Thread: 2038r Controls question and SVC/Power Beyond ports questions

  1. Top | #1

    Join Date
    May 2017
    Last Online
    Today @ 09:29 AM
    Location
    Illinois
    Posts
    16
    Thanks
    0
    Thanked 4 Times in 2 Posts

    2038r Controls question and SVC/Power Beyond ports questions

    I hoping someone can help me validate what my controls my rear power beyond / svc ports are. The manuals I was given do not cover most of the levers and switches I have questions about.

    Click image for larger version. 

Name:	2038Controls.png 
Views:	31 
Size:	4.36 MB 
ID:	692776

    Pardon my poor letters and numbers on the image. I listed out all of them, even ones that I have been using for the past couple years since.
    Switches:
    A - PTO Engagement, hold for Reverse Override
    B - Cruise Control
    C - Power Beyond Control (???)
    D - (???)
    Levers and Knobs
    1 - Mid Mower Height Control
    2 - (???)
    3 - (???)
    4 - Rear 3pt Arms
    5 - Mid Mount Mower Height adjustment
    6 - Rear 3pt Arm Lowering Speed control

    Can someone help me ID the ??? and validate the others?





    Click image for larger version. 

Name:	RearSVC.jpg 
Views:	14 
Size:	259.0 KB 
ID:	692778

    For my rear ports, which ones are the power beyond, which ones are third (and fourth) function. Based on this answer(s), I have a couple more questions

    Thanks in advance.
    Last edited by turpincl; 06-25-2019 at 10:27 PM.
    bfloyd4445 likes this.
    Current:
    2017 JD 2038r w/ 220R loader, 57" bucket with loops, 72"MMM Driver Over Autoconnect, 366 Front Blade with Hydro Angle, Rear SVC, Wheel spacers, and Beet Juice Filled Rears (400lbs)

    Retired:
    2004 JD 2210 w/ 2000CX Loader, 62" MMM, 54" Front Blade with Hydro Angle

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Jarrod32's Avatar
    Join Date
    Apr 2014
    Last Online
    11-11-2019 @ 11:31 PM
    Location
    Nebraska
    Posts
    195
    Thanks
    13
    Thanked 21 Times in 16 Posts
    Levers 2 and 3 are your hydraulic controls for the ports in your second pic.
    I don't see the power beyond port in the picture...
    turpincl likes this.
    JD 1025r; H120 loader; Howse 48" rotary cutter; Deere 647 tiller; County Line post hole digger; County Line middle buster; County Line carry-all; Ford 5' 3-point blade; Heavy Hitch receiver hitch/weight bracket; Heavy Hitch tooth bar; Titan pallet forks; Ken's bolt-on hooks.

  4. Top | #3

    Join Date
    Jul 2018
    Last Online
    11-10-2019 @ 12:54 AM
    Location
    Drain Oregon
    Posts
    796
    Thanks
    17
    Thanked 43 Times in 41 Posts
    Quote Originally Posted by turpincl View Post
    I hoping someone can help me validate what my controls my rear power beyond / svc ports are. The manuals I was given do not cover most of the levers and switches I have questions about.

    Click image for larger version. 

Name:	2038Controls.png 
Views:	31 
Size:	4.36 MB 
ID:	692776

    Pardon my poor letters and numbers on the image. I listed out all of them, even ones that I have been using for the past couple years since.
    Switches:
    A - PTO Engagement, hold for Reverse Override
    B - Cruise Control
    C - Power Beyond Control (???)
    D - (???)
    Levers and Knobs
    1 - Mid Mower Height Control
    2 - (???)
    3 - (???)
    4 - Rear 3pt Arms
    5 - Mid Mount Mower Height adjustment
    6 - Rear 3pt Arm Lowering Speed control

    Can someone help me ID the ??? and validate the others?





    Click image for larger version. 

Name:	RearSVC.jpg 
Views:	14 
Size:	259.0 KB 
ID:	692778

    For my rear ports, which ones are the power beyond, which ones are third (and fourth) function. Based on this answer(s), I have a couple more questions

    Thanks in advance.
    good question. I have a 2032r to be delivered in a week with BH and the two valves for TNT. I don't have a mower deck so some of the stuff your dealing with will not be on mine. The power beyond is not in the pix it is a loop in and out that the BH hooks into. Do you have a BH?
    turpincl likes this.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    May 2017
    Last Online
    Today @ 09:29 AM
    Location
    Illinois
    Posts
    16
    Thanks
    0
    Thanked 4 Times in 2 Posts
    Quote Originally Posted by Jarrod32 View Post
    Levers 2 and 3 are your hydraulic controls for the ports in your second pic.
    I don't see the power beyond port in the picture...
    Do the rear levers only work when switch C is flipped? Or does Switch C make the bottom left port power beyond (just matching up the pictures)?
    (lack of documentation I have is making me struggle..)
    Current:
    2017 JD 2038r w/ 220R loader, 57" bucket with loops, 72"MMM Driver Over Autoconnect, 366 Front Blade with Hydro Angle, Rear SVC, Wheel spacers, and Beet Juice Filled Rears (400lbs)

    Retired:
    2004 JD 2210 w/ 2000CX Loader, 62" MMM, 54" Front Blade with Hydro Angle

  7. Top | #5

    Join Date
    Jun 2014
    Last Online
    10-21-2019 @ 12:28 PM
    Location
    Oregon
    Posts
    112
    Thanks
    0
    Thanked 8 Times in 8 Posts
    Quote Originally Posted by turpincl View Post
    Do the rear levers only work when switch C is flipped? Or does Switch C make the bottom left port power beyond (just matching up the pictures)?
    (lack of documentation I have is making me struggle..)
    C makes 2 into a flow loop. This would be for something like a Wood Splitter, there is a different Power Beyond kit for a Backhoe. You can get all this on Deere's site:
    John Deere Ag - New Equipment: Technical Publications - Publications Search


    Operate Dual Rear Selective Control Valve (SCV)—If Equipped
    This machine can be equipped with an optional dual rear selective control valve outlet kit to operate hydraulically driven implements from outlets at the rear-mount position.
    The machine-mounted hydraulic outlets are female quick couplers.

    I Rear Outlet Selective Control Valve

    LV25999-UN-15AUG16

    LV26000-UN-15AUG16

    A - 1 Rear Selective Control Valve Lever
    B - Retract Outlet
    C - Extend Outlet
    D - Continuous Flow Switch
    E - On Position
    F - Off Position

    Cylinder Extend—Pull I rear selective control lever (A) rearward to allow flow from the circuit out through outlet (C) and return to the machine through outlet (B).

    Cylinder Retract—Push I rear selective control lever (A) forward to allow flow from the circuit out through outlet (B) and return to the machine through outlet (C).

    Operate the Continuous Flow Switch (I Rear Outlet SCV)
    The 1 rear outlet SCV may be operated in a momentary condition to operate attachments such as extending or retracting a hydraulic cylinder. The attachment will receive full hydraulic flow in direct response to the use of the control switch.
    The continuous flow switch (D) will supply continuous flow to the I rear selective control valve. To operate the continuous flow:
    Depress the continuous flow switch to the on position (E) to activate. Pull rearward on control lever (A). Once activated, “Continuous Flow On” will be displayed in the information display screen.
    Depress the continuous flow switch to the off position (F) to deactivate.

    II Rear Outlet Selective Control Valve

    LV26001-UN-15AUG16

    LV26002-UN-15AUG16

    G - II Rear Selective Control Valve Lever
    H - Retract Outlet
    I - Extend Outlet

    Cylinder Extend—Pull II rear selective control lever (G) rearward to allow flow from the circuit out through outlet (I) and return to the machine through outlet (H).

    Cylinder Retract—Push the II rear selective control lever (G) forward to allow flow from the circuit out through outlet (H) and return to the machine through outlet (I).

    Float Position (II Rear Outlet SCV)
    “Float” operation allows cylinder to extend and retract freely, such as when an implement follows ground contour.
    Push lever forward, through retract, into detent to operate “float” feature.
    Manually return lever to neutral when “float” is no longer required.

    GS25068,0003E08-19-20180202
    Copyright © 2013 Deere & Company.
    All Rights Reserved.
    About Our Site | Site Search | Contact Us | Privacy and Data | Legal |
    Connect with Us on
    Last edited by ORCM; 06-26-2019 at 02:48 AM.
    2018 2038R, R3 Radials, 220R, 72D Command Cut & Mulch Kit, Wheel Spacers, Premium Lighting, Rear Dual SCV's.

  8. Top | #6

    Join Date
    May 2017
    Last Online
    Today @ 09:29 AM
    Location
    Illinois
    Posts
    16
    Thanks
    0
    Thanked 4 Times in 2 Posts
    Quote Originally Posted by ORCM View Post
    C makes 2 into a flow loop. This would be for something like a Wood Splitter, there is a different Power Beyond kit for a Backhoe. You can get all this on Deere's site:
    John Deere Ag - New Equipment: Technical Publications - Publications Search

    Thanks for the info. I looked previously at that link, but missed this section apparently. I looked under controls, but these were not listed under controls.

    Based on the responses above, I think I am only missing what one of these is now (switch D)

    Switches:
    A - PTO Engagement, hold for Reverse Override
    B - Cruise Control
    C - Continuous Flow Switch for Rear Port
    D - (???)
    Levers and Knobs
    1 - Mid Mower Height Control
    2 - Rear Port I Control
    3 - Rear Port II Control
    4 - Rear 3pt Arms
    5 - Mid Mount Mower Height adjustment
    6 - Rear 3pt Arm Lowering Speed control
    Current:
    2017 JD 2038r w/ 220R loader, 57" bucket with loops, 72"MMM Driver Over Autoconnect, 366 Front Blade with Hydro Angle, Rear SVC, Wheel spacers, and Beet Juice Filled Rears (400lbs)

    Retired:
    2004 JD 2210 w/ 2000CX Loader, 62" MMM, 54" Front Blade with Hydro Angle

  9. Top | #7
    Big
    Big is online now
    Big's Avatar
    Join Date
    Jan 2018
    Last Online
    Today @ 10:01 PM
    Location
    Greenville SC
    Posts
    1,344
    Thanks
    110
    Thanked 244 Times in 176 Posts
    [QUOTE=turpincl;3289432]
    Quote Originally Posted by ORCM View Post
    C makes 2 into a flow loop. This would be for something like a Wood Splitter, there is a different Power Beyond kit for a Backhoe. You can get all this on Deere's site:
    John Deere Ag - New Equipment: Technical Publications - Publications Search
    /QUOTE]


    Thanks for the info. I looked previously at that link, but missed this section apparently. I looked under controls, but these were not listed under controls.

    Based on the responses above, I think I am only missing what one of these is now (switch D)

    Switches:
    A - PTO Engagement, hold for Reverse Override
    B - Cruise Control
    C - Continuous Flow Switch for Rear Port
    D - (???)
    Levers and Knobs
    1 - Mid Mower Height Control
    2 - Rear Port I Control
    3 - Rear Port II Control
    4 - Rear 3pt Arms
    5 - Mid Mount Mower Height adjustment
    6 - Rear 3pt Arm Lowering Speed control
    I have dual rear SCV and switch "D" is not installed on my tractor.
    -2017 2032R, 220r Loader, I-Match, Ken's Extended Top Hook, MMM, JD Ballast Box, Dual rear SCV's, Single Point Hydraulic Connection, Landscape Rake, Tarter Tiller, Boom Pole, Middle Buster/Potato Plow, Drag Harrow, Single Row Hipper, 5' Enorossi sickle bar, 3 point spike drag, Titan 42" Forks, 60" Box Blade, Landpride 3 point spreader, Leinbach 5' Disc.

    -Bobcat 325G Mini Ex
    -Toro Dingo 322 with many attachments
    -Honda Pioneer 700

  10. Top | #8

    Join Date
    Jun 2014
    Last Online
    10-21-2019 @ 12:28 PM
    Location
    Oregon
    Posts
    112
    Thanks
    0
    Thanked 8 Times in 8 Posts
    Quote Originally Posted by turpincl View Post
    Thanks for the info. I looked previously at that link, but missed this section apparently. I looked under controls, but these were not listed under controls.

    Based on the responses above, I think I am only missing what one of these is now (switch D)

    Switches:
    A - PTO Engagement, hold for Reverse Override
    B - Cruise Control
    C - Continuous Flow Switch for Rear Port
    D - (???)
    Levers and Knobs
    1 - Mid Mower Height Control
    2 - Rear Port I Control
    3 - Rear Port II Control
    4 - Rear 3pt Arms
    5 - Mid Mount Mower Height adjustment
    6 - Rear 3pt Arm Lowering Speed control

    I Believe that is for locking the 3pt position. I thought they only put that on European models. Have you tested it?
    2018 2038R, R3 Radials, 220R, 72D Command Cut & Mulch Kit, Wheel Spacers, Premium Lighting, Rear Dual SCV's.

  11. Top | #9
    HomesteadJoe's Avatar
    Join Date
    Mar 2017
    Last Online
    Today @ 01:45 PM
    Location
    Southwestern Connecticut
    Posts
    1,603
    Thanks
    139
    Thanked 284 Times in 206 Posts
    Quote Originally Posted by ORCM View Post
    I Believe that is for locking the 3pt position. I thought they only put that on European models. Have you tested it?
    The FRONT 3 point hitch.....

    Sincerely
    JustinHEMI likes this.
    BadAss 2038R, R3s, R4s, Spacers, Eng & Tranny Heaters, LEDs, Cages, Fender Flares, Front Fenders, iMatch, Heavy Hitch, Hitch-N-Can, 800# Quick Tach Weights, 220R Loader, Single Point Hyd, 57" HD Bucket, WR Long Tooth Bar & 3rd Function Hyd, 55" Wicked Root Rake Grapple, 270B Backhoe, 72D MMM, Front 3 pt Hitch, 366 FMB Blade, PHD300 Post Hole Digger w\ Auger Set, LR2172 Landscape Rake w/gage Wheels, RB2072 Rear Blade, BB2072 Box Blade, AP12F Pallet Forks, EA 72" Pine Needle Rake, Fit-Rite TNT

  12. Top | #10

    Join Date
    May 2017
    Last Online
    Today @ 09:29 AM
    Location
    Illinois
    Posts
    16
    Thanks
    0
    Thanked 4 Times in 2 Posts
    Quote Originally Posted by HomesteadJoe View Post
    The FRONT 3 point hitch.....

    Sincerely
    I swear when i put the a-frame on the with the three point arms for the snow blade, it used the the ports where the loader goes. i did not turn on a switch and used the joystick.
    HomesteadJoe likes this.
    Current:
    2017 JD 2038r w/ 220R loader, 57" bucket with loops, 72"MMM Driver Over Autoconnect, 366 Front Blade with Hydro Angle, Rear SVC, Wheel spacers, and Beet Juice Filled Rears (400lbs)

    Retired:
    2004 JD 2210 w/ 2000CX Loader, 62" MMM, 54" Front Blade with Hydro Angle

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •