2016 x758 w/60" HC mower, 54" snowblower, MC519 bagger
2010 2520 w/61" H130 loader, TA 42" forks, KK 60" Pro tiller, iMatch quick hitch, KK middle buster
1996 345 - Traded
Other toys: Stihl BR600 backpack blower; McCulloch chainsaws: 10-10S, 700, 805, 10-10; JD trimmer
Be sure to check the Neutral Safety Switch connection and the switch itself. Mine came loose at one point (working clearing some brush) and I couldn't figure out why it wouldn't crank.
John Deere 2720 with 200CX Loader and 62D Belly Mower
Attachments: Frontier LR1060 Landscape Rake, John Deere 54" Front-Mounted Snowblower, Frontier RB 1060 Rear Blade, Frontier PM1001 Middlebuster, Howse DLHT168 Tandem Disc Harrow
I had a similar problem on my 2017 1025R. Sometimes would start, other time would not crank even though all lights came on as if everything functioning normal. Turned out to be a defective ignition switch. Replaced by dealer under warranty, no problems since
i bet the problem could have very well been that sketchy ground wire connection, a bad ground can be a very pesky, intermittent problem. Hope you're all fixed!
1984 JD 316 w/ cat 0 3-pt hitch and 2000 rpm pto, 48" tiller, 49" snowblower, 42" belly mower
2015 JD 1025r, 60d MMM, 54" front mounted snowblower, Heavy hitch, Ballast box
1980 JD 1050 4wd, JD 75 loader, IH 60" brush hog
1980? Satoh S550g Elk, 60" belly mower
McCulloch Saws - 1970's Mini Mac 30; Mac 10-10
1978 Ariens Sno-Thro 32"; Troy-Bilt 24" snoblower
1996 Polaris 680 Ultra Snowmobile, 2004 Yamaha Raptor 660, 2016 Polaris Sportsman 570
1996 KTM EXC 300
Gravely ZT-HD 60"
2nd update - well it was not cleaning the negative battery to frame connection. Same problem. Now I have replaced the ignition switch. Very easy to do this. The ignition switch mates up and presses into the wiring harness connector. Only will fit one way. JD factory used a plastic pull tie over the assembly to squeeze together. Poor approach. I removed it and used a band clamp/water hose type clamp to reasonably tighten the ignition switch to the harness connector. Put it all back together. Time will tell. If I cut grass for an hour that is the real test. I will be back with itâ€™s fixed or not yet.