I believe the shorter one (#11) attaches under the floor board (1st pic). See link for some more details:
And the larger one (#14) attaches to a bolt on the frame of the tractor (pics 2 & 3). Sorry for not having better pics but this is all I had available at this time.
I hope this helps,
2011 JD 2520, 200CX FEL, iMatch Quick Hitch, 48" JD Box Scraper, 54" JD FM Snowblower, Artillian 36" Forks w/Backrest, Frontier PHD200, Woods RM59 Finish Mower & Heavy Hitch
OK, I was able to find this document (see link) which shows the proper installation on the 2520. Now it's clear to me where the larger guide goes.
I don't think I'm going to drill the hole in the foot rest for the smaller one though. I'll continue to use the hose guide I installed for the FEL - I have it attached to the metal tab hanging down under the foot rest.
Ensoll, I'm still interested in how you did it.
Last edited by Kennyd; 10-04-2011 at 06:44 PM. Reason: Removed TBN link and added attachment
Looks like you are headed in the right direction. Here are pics of my 2520. This how the dealer installed them for the FEL and blower. The arrangement is exactly the same on my 2305. I don't think you can go wrong on how you do it as long as the hoses are secure. The big one in the middle is angled to accommodate the FEL stand or it would interfere. Hope this helps.
Randy __________________________________________________ ___ Be Safe!
2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
Everything Attachments ETA-PluggerV2-60 Aerator
The more I learn, the less I know.
Sorry Dave, I looked in the most likely spot, didn't find the instructions there, headed off to the next most likely place, and then my ferrite-like attention span went in another direction. I'll get them eventually, although out looks like you have your answer already.