Green Tractor Talk banner

Reaction score
79,872

Profile posts Latest activity Discussions About

  • · Official "Groovie" Dude
    2022 John Deere 4066R Cab and loader
    Joined
    ·
    5,712 Posts
    Kenny just wanted to thank you for the quality hooks and for your help with my rear scv addition. Your top notch in my book and you gladly help members out everyday.

    · Registered
    Joined
    ·
    0 Posts
    Have a question about hydraulics, I cab figure out how to post a question in the technical area. Just bought a used John Deere 2320, worked well for a week or so, then started losing power steering and lifting capabilities. Fluid was craemy so I flushed system and filter 2x. On my third full up and filter its full, but jerks and moves very slow when lifting, limited to no power steering. Google is no help, you know anything or anyone I could try?
    I have a mechanical military backround but never worked with hydraulics.
    Thanks!

    · Registered
    Joined
    ·
    33 Posts
    Do you think that low pressure would cause the rock are to move very slowly? I have change fluid and cleaned all screens but have same results

    · Registered
    Joined
    ·
    0 Posts
    Looking for a little help - any suggestion?
    I was driving my 5200 today - another slow plowing day! I notice the the gear shift lever was very loose and then I gave it a pull and it came right out (I was holding it in my hand - the whole lever). I did notice the boot at the base of the lever was loose and I think the spring pin looked broken (? - but I was not sure) but now how do I access that area? Is this an easy fix? Do I need to remove the wheel cover or is it possible to just remove the plastic and metal box around the based of the gear shift? Do you think this might just be a pin fix or there other things I should look for?

    · Registered
    Joined
    ·
    0 Posts
    hey kenny D I have a 4100 compact tractor and was wondering if I could install a third function control from wr long on it ?

    · Premium Member
    Joined
    ·
    23,011 Posts
    Seeing on weather channel you and others are getting pounded with rain.. Just wondering and praying all is OK .. I know it will get worst. Ours is suppose to happen tomorrow evening....

    · Registered
    Joined
    ·
    29 Posts
    sorry if this is in bad taste, to ask a tech question here... just bought a 2305 and went thru manual to troubleshoot why my mmm doesnt adjust with lever. turns out the deck is not attached to rsarm, linkage is just laying on top of the deck. i need a picture of how that connects to the arm; description would be ok too. dealer wasnt real helpful, short of setting up a service appt. searched JD site, couldnt find the answer. asked the Q on here, no reply yet (i am probably impatient, but need to start mowing!) thanks for considering my Q...

    · Registered
    Joined
    ·
    155 Posts
    Yep. I was pasting from word, what is the trick?
    I had a complete parts list that was left off.

    · Administrator
    Joined
    ·
    25,396 Posts
    Thanks for your contribution as a sponsor here on this site. It has been a great source of information.

    · Registered
    Joined
    ·
    4 Posts
    I have a John Deere 4600 Tractor with the 460 Loader. I need a third set of hydraulics for a grapple bucket. Any suggestions on how to accomplish this.

    · Premium Member
    Joined
    ·
    1,007 Posts
    Ken- Did we lose the "See all posts" (Say 'by Scotty370'...) option? I liked to go there, and see if I had responses..~Scotty Grldscttjr@aol.com

    · Registered
    Joined
    ·
    280 Posts
    i wish that we had a list of everyone that joins that day, i will keep looking thanks

    · Administrator
    Joined
    ·
    27,451 Posts
    Not that I know of. It does show the newest member that joined at the bottom of the home page, that's all that I know of.
  • Loading…
  • Loading…
  • Loading…
Top