Homemade weight bar, forks etc.....
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
Like Tree92Likes

Thread: Homemade weight bar, forks etc.....

  1. Top | #1
    Kickin_killa's Avatar
    Join Date
    Jun 2014
    Last Online
    07-28-2019 @ 05:08 PM
    Location
    Fayette Co. Pa.
    Posts
    98
    Thanks
    4
    Thanked 23 Times in 17 Posts

    Homemade weight bar, forks etc.....

    Here are some attachments that I have made so far for my 1023e. Some I have put on here before, some not. I like seeing what everyone has made for their tractors so I figured I would share my stuff too
    First up are my forks. I use these more than anything (other than my mower deck)

    Next is my trailer mover. Helps me out a lot.

    Rear forks I just made today. I might do a little tweaking to these before I paint it.


    Snow plow I made using an ATV plow set up I bought off of Craigslist cheap!. It welded nicely to the frame I made. It's rock solid with all the gussets.


    Rear hitch and weight holder.

    Front brush guard and weight holder (bottom plate is the weight holder)

    Boom pole....it has since been painted. It also works with the rear forks.

    Put this roller on my deck after seeing a video on YouTube. It made a world of difference in mowing!

    A bed for the back. I use this a lot at camp.

    Light guards and two ammo boxes for chains, storage etc.. also installed LED lights on the ROP. The ax has been removed since the photo

    Thank you for looking! I got about 250 bucks in all of this. I got all the metal from my buddy and some from work (I went dumpster diving lol). Only thing I had to pay for is the plow, the paint and the hooks on the bucket and on the fork frame. My next build is a rear box blade and a tooth bar for the bucket but I'm out of metal so it will be a while
    John Deere 1023E with front loader and 54" deck
    John Deere ballast box....JD 647 tiller....County Line 5' rear blade....Howse 4' rotary cutter.
    All the following are homemade....Brush guard/front weight bar with weights....boom pole....middle buster....front hoe bucket....pallet forks....bed for hauling tools....rear weight bar/hitch....snow plow.... box blade....and anti scalp roller on the deck as seen on TTWT
    Modified ROP....LED lights on the ROP and ammo boxes for tools.

  2. The Following 7 Users Say Thank You to Kickin_killa For This Useful Post:

    balrog006 (07-07-2017), etcallhome (07-08-2017), flyweight (07-07-2017), Levi (07-07-2017), mjncad (07-07-2017), Old Cajun (07-09-2017), pcabe5 (07-07-2017)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    JD322's Avatar
    Join Date
    May 2014
    Last Online
    08-21-2019 @ 02:02 PM
    Location
    Pittsburgh, PA
    Posts
    301
    Thanks
    64
    Thanked 99 Times in 71 Posts
    Nice job on all of your custom made attachments!!
    pcabe5, BigJim55, Robnik and 1 others like this.
    4044R - H180 - KBOGH - Pallet Forks - 84 Front Blade - I- Match - Fit Rite Top Link - Woods PRD 8400 - Landscape Rake

  5. Top | #3
    mjncad's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 01:07 AM
    Location
    Front Range of Colorado
    Posts
    6,945
    Thanks
    1,785
    Thanked 547 Times in 432 Posts
    How long is your boom pole and how much does it weigh?
    pcabe5, Robnik and PJR832 like this.
    I have more ideas than ambition.


  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    JKR
    JKR is offline
    JKR's Avatar
    Join Date
    Sep 2013
    Last Online
    Today @ 05:36 AM
    Location
    Hudson Valley NY
    Posts
    1,222
    Thanks
    52
    Thanked 106 Times in 96 Posts
    very nice work. I like your plow setup.
    etcallhome, pcabe5, Robnik and 1 others like this.
    3033R, HST, 3SVC, 60" heavy bucket with replaceable blade, H165 loader, Trans and engine heater, 60" tow behind mower.
    hydraulic top link, Line kit, 72" hydraulic power angle plow, JD pallet forks, 60" box blade, 60" scraper,
    72" rear rake, Homemade rock bucket, Post hole digger.Piranha Tooth Bar, Ballast box, rear chains,

  8. Top | #5

    Join Date
    Aug 2016
    Last Online
    01-29-2019 @ 12:20 PM
    Location
    Urbana, IL
    Posts
    60
    Thanks
    6
    Thanked 2 Times in 2 Posts
    Neat stuff.
    What's the deal with the roller wheel?
    Got a vid link?
    Thanks
    etcallhome, pcabe5, Robnik and 1 others like this.
    1988 420, 3 pt, rear pto, rear hydraulics - 60" deck, 48" JD tiller, 47 JD Snowblower, Loader, 5' LandShark box blade

  9. Top | #6
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 08:28 AM
    Location
    New York
    Posts
    34,170
    Thanks
    5,769
    Thanked 3,948 Times in 2,911 Posts
    Thanks for the post Kickin_killa. A lot of build hours.
    etcallhome, pcabe5, Robnik and 1 others like this.
    Keith

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD, The Wife
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  10. Top | #7
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 08:33 AM
    Location
    Central New York
    Posts
    11,131
    Thanks
    1,882
    Thanked 1,508 Times in 1,234 Posts
    Quote Originally Posted by Kickin_killa View Post
    Here are some attachments that I have made so far for my 1023e. Some I have put on here before, some not. I like seeing what everyone has made for their tractors so I figured I would share my stuff too
    First up are my forks. I use these more than anything (other than my mower deck)

    Next is my trailer mover. Helps me out a lot.

    Rear forks I just made today. I might do a little tweaking to these before I paint it.


    Snow plow I made using an ATV plow set up I bought off of Craigslist cheap!. It welded nicely to the frame I made. It's rock solid with all the gussets.


    Rear hitch and weight holder.

    Front brush guard and weight holder (bottom plate is the weight holder)

    Boom pole....it has since been painted. It also works with the rear forks.

    Put this roller on my deck after seeing a video on YouTube. It made a world of difference in mowing!

    A bed for the back. I use this a lot at camp.

    Light guards and two ammo boxes for chains, storage etc.. also installed LED lights on the ROP. The ax has been removed since the photo

    Thank you for looking! I got about 250 bucks in all of this. I got all the metal from my buddy and some from work (I went dumpster diving lol). Only thing I had to pay for is the plow, the paint and the hooks on the bucket and on the fork frame. My next build is a rear box blade and a tooth bar for the bucket but I'm out of metal so it will be a while
    I like everything you've done. I have a 72" Moose plow that is now on our Mule that I plan on doing the same thing with. I know the tractor will push snow better than the side by side.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  11. Top | #8
    bvbearcat's Avatar
    Join Date
    May 2017
    Last Online
    08-26-2019 @ 08:05 AM
    Location
    Central Ohio
    Posts
    458
    Thanks
    154
    Thanked 88 Times in 51 Posts
    Quote Originally Posted by Kickin_killa View Post
    Here are some attachments that I have made so far for my 1023e. Some I have put on here before, some not. I like seeing what everyone has made for their tractors so I figured I would share my stuff too
    Thank you for looking! I got about 250 bucks in all of this. I got all the metal from my buddy and some from work (I went dumpster diving lol). Only thing I had to pay for is the plow, the paint and the hooks on the bucket and on the fork frame. My next build is a rear box blade and a tooth bar for the bucket but I'm out of metal so it will be a while
    Just awesome! Well done
    2017 2032R (Gen2)
    FEL (220r) w/57" Bucket and 48" forks
    60D AutoConnect MMM

  12. Top | #9
    flyweight's Avatar
    Join Date
    Jun 2014
    Last Online
    Yesterday @ 07:59 PM
    Location
    Louisiana, (southeast)
    Posts
    9,366
    Thanks
    820
    Thanked 1,733 Times in 1,194 Posts
    Real nice work there, Kickin_killa. You did well.
    etcallhome, wentonbrown and Robnik like this.
    Michael

    2019 JD Z540R 54" cutting deck w/MulchControl™
    1984 JD 750
    1971 JD 15 Chainsaw ← hasn't run since ~1975

    Also have a bunch of other stuff.
    ---------------------------------------
    " If there's no one around to smell me, do I really stink"?
    - John Wells - Brewster County, West Texas.










  13. Top | #10
    Kickin_killa's Avatar
    Join Date
    Jun 2014
    Last Online
    07-28-2019 @ 05:08 PM
    Location
    Fayette Co. Pa.
    Posts
    98
    Thanks
    4
    Thanked 23 Times in 17 Posts
    Quote Originally Posted by Fueler View Post
    Neat stuff.
    What's the deal with the roller wheel?
    Got a vid link?
    Thanks
    Here you go sir.
    http://www.greentractortalk.com/foru...lp-roller.html
    John Deere 1023E with front loader and 54" deck
    John Deere ballast box....JD 647 tiller....County Line 5' rear blade....Howse 4' rotary cutter.
    All the following are homemade....Brush guard/front weight bar with weights....boom pole....middle buster....front hoe bucket....pallet forks....bed for hauling tools....rear weight bar/hitch....snow plow.... box blade....and anti scalp roller on the deck as seen on TTWT
    Modified ROP....LED lights on the ROP and ammo boxes for tools.

  14. The Following User Says Thank You to Kickin_killa For This Useful Post:

    Tractor Tim (07-07-2017)

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •