Beats me. Is this a test?
Current: 3320 HST cab with 59" front blower, Hydraulic chute deflector, Vertical Exhaust, Front Fenders,
Grooved and loaded Front and Rear R-4's
External Mirrors, Jensen Bluetooth Radio / Headset. Front Hydraulics
Whelen warning lights, JD366 front blade
Gone: X595 with heated cozy cab,stainless vertical exhaust
John Deere 790, 300 loader w Ken's Bolt on Hooks & Piranha tooth bar, grapple, back blade, box blade, Bush Hog mower, couple of red tractors, hay equipment, various old stuff some red, one orange, some I don't remember
Pivit point for something?
2014 John Deere 2032R
H130 FEL, 54" Front Blade modded to 70", "Priceless" Artillian 42" pallet forks.http://www.artillian.com/
I-Match hitch, Ballast Box, Box Blade, Landscape Rake, Rear Blade
Traded in: 1026R w/fel, 60" auto conn. deck. Great tractor. Will be missed.
Sold to fil: 445 w/54" deck, snow blade/plow, 3pt. hitch
Sold to father: JD stx38 Has outrun it's hood.
It's upside down, it is a heavy duty cup holder.
Randy __________________________________________________ ___ Be Safe!
2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
Everything Attachments ETA-PluggerV2-60 Aerator
The more I learn, the less I know.
I think it's a how-ya-ma-call-it. It connects to the thing-a-ma-jig, under the con-ib-ling pin next to the capilotade entermete.
Although, I could be wrong.
The fruits of a mad genius at work.
2013-2032r, Curtis Hard side cab (project), H130 FEL & 61"bucket, Artillian Modular Grapple on HD frame with Diverter, 2300# Artillian frame w/ 36" x 3" tines, 46BH 9" & 13" bucket, Frontier RB1060, HLA 1000 series 60" JDQA Snow plow, JD ballast box, RK QH, Homemade 3pt multi purpose hitch, 117W of extra LED lights on ROPS and side Brush guards, Ken's bolt on hooks-3x, Ideal Knife grooved R-4's.
It attaches to your hitch on the back of your truck with the cup facing up so you can put a steel pole in it tall enough to add a seat to it. That way you can sit on it and it rotates 360°.
1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --
Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1˝" rear wheel spacers.
NRA Life Member
It's a valve controller for a findiblium value normally used on a submarine, but only if the tube stock goes straight thru. Or it could be a neat cap for your artesian well to show off your welding skills!
X 738 4X4/ 54" mower deck, 47" two stage snow thrower/ linear actuator spout control, Curtis hard side cab/heater, JD roof top LED work lights, Curtis fuse block, rear roof light connected to dash light switch and reverse lights, additional 20amp alternator, Curtis fast Cast 2000 sander custom fitted to tractor/ vibrator for use with dry sand, Kubota L39 TLB, JD 450 E dozer, Husky 18 horse/ 48" mower deck/Berco 42" two stage snow thrower/Berco soft side cab, Kubota RTV500-H.
Flux capacitor service entry cap w/ removable handles.
Subscribe to dieselshadowman on YouTube
2720 w/ 200CX FEL, Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
1954 60 - getting full restoration, 1964 110 round fender in the shop for crustoration
Ferris IS3200Zzero turn mower