Welding table project
Results 1 to 4 of 4
Like Tree13Likes
  • 8 Post By BillieS
  • 5 Post By BillieS

Thread: Welding table project

  1. Top | #1

    Join Date
    May 2013
    Last Online
    Today @ 06:45 AM
    Location
    Eastern Panhandle WV
    Posts
    1,010
    Thanks
    16
    Thanked 168 Times in 96 Posts

    Welding table project

    I was finally able to get back on to my welding table project. Here is what I have started.
    Attached Thumbnails Attached Thumbnails 20170219_160729.jpg  
    2019 3046r, 385A BH, FEL, JD Ballist box, 6' 3pt hitch rake, 4 way 48" snow blade, 7' 3pt hitch drag blade
    Zero turn Z445, 5' 3pt hitch woods mower, 42" Artillian Pallet forks W/Adapter for snow plow, Standard 3pt hitch receiver to move trailers.
    I haul the tractor with a 2015 2500HD Chevrolet Silverado 4X4 6.6L Duramax W/Allison transmission a 2013 18' 7500lb dove tail trailer made by Appilachian trailers.
    Stihl MS271 Farm Boss Chain Saw 18" blade, Piranha Bar.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    MeagerHair's Avatar
    Join Date
    Sep 2015
    Last Online
    Yesterday @ 09:52 PM
    Location
    Cumberland Valley - PA
    Posts
    1,083
    Thanks
    48
    Thanked 154 Times in 107 Posts
    That is a great base.
    2007 2305, New to Me 12/15
    62c MMM, Independent Mid Lift
    H130 FEL, Heavy Hitch, , IMatch, Ken's Bolt on Hooks,
    N1 Sunshade, 48" Flex Hitch King Kutter,
    72" CTA Snow Pusher, CIDAttachments Forks
    LP 60” Grader Scrapper, R2 Edge Tamers
    Hitch'N Can

  4. Top | #3
    Superglidesport's Avatar
    Join Date
    Dec 2011
    Last Online
    Today @ 04:52 PM
    Location
    Littleton, MA
    Posts
    7,708
    Thanks
    694
    Thanked 1,584 Times in 994 Posts
    Quote Originally Posted by BillieS View Post
    I was finally able to get back on to my welding table project. Here is what I have started.
    Looks like you've got quite a nice slab of steel there! Keep us updated on your progress.
    John Deere 3320
    eHydro, R4's, 300CX Loader, 61" HD Bucket
    JD Tooth Bar, Deluxe Hood Guard, Ken's Bolt-on Hooks
    485 Backhoe w. 18" HD Bucket
    Mid-PTO, Front 3 Point Hitch, 366 Front Blade
    Tarter 5' 3PH Tiller
    Frontier AP12F Forks

    John Deere 2032R
    R3's, 220R Loader, 57" HD Bucket
    Curtis Hard Side Cab & Heater
    62D Deck, iMatch Quick Hitch
    54 Snowblower
    Super HeavyHitch
    Little Wonder "Optimax" & JRCO Blower Buggy
    Fimco 60 Gallon 3PH Boomless Sprayer w. PTO Pump

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    May 2013
    Last Online
    Today @ 06:45 AM
    Location
    Eastern Panhandle WV
    Posts
    1,010
    Thanks
    16
    Thanked 168 Times in 96 Posts
    Quote Originally Posted by MeagerHair View Post
    That is a great base.
    Thanks, the legs and frame is 4" 1/4" thick square tubing. The top is what I cut from a 4'X8'x1" thick aircraft grade aluminum sheet I had left over from a job I use to work at many moons ago. The board on the back will be my venting system. You cannot see it, but the backboard is tilted. I picked up a nice 8" ventilator with vent tubing from HF yesterday with their sale on. I will be lining the back and sides with cement board, the type they use to line the back of a woodstove wall with. I will cut a 8" diameter hole in the back of the wood, which is where I will attach the tubing and ventilator to. Then the final product I purchased a 6'X8' welding curtain to swing back behind me. This should contain all my sparks and smoke from emanating throughout the garage. Most of my welding is done outside the garage, but in the winter I do small stuff inside. My welding consists of tinkering and making stuff myself. I am by far not a welder but I can burn the [email protected] out of rods in an attempt to stick to pieces of metal together.
    Last edited by BillieS; 02-21-2017 at 07:42 AM.
    2019 3046r, 385A BH, FEL, JD Ballist box, 6' 3pt hitch rake, 4 way 48" snow blade, 7' 3pt hitch drag blade
    Zero turn Z445, 5' 3pt hitch woods mower, 42" Artillian Pallet forks W/Adapter for snow plow, Standard 3pt hitch receiver to move trailers.
    I haul the tractor with a 2015 2500HD Chevrolet Silverado 4X4 6.6L Duramax W/Allison transmission a 2013 18' 7500lb dove tail trailer made by Appilachian trailers.
    Stihl MS271 Farm Boss Chain Saw 18" blade, Piranha Bar.

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •