John Deere 425. 1994 model currently with 1531 hours. Perfect running order and no expense has been spared to take care of all service and maintenance - needs nothing and ready to work.
Gas powered Kawasaki 2-cylinder 20HP motor. All hydraulics operate perfectly including power steering. Differential lock. Plastic hood, side panels, and instruments panels are perfect. All lights and gauges work correctly. I have kept this inside for the 3 years that I've owned it - this is not a rat that's been left out under a tree.
Currently has a Model 40 loader attached but I will sell the loader and tractor separately.
I've had this machine about 3 years and have updated/serviced/replaced the following:
Operator's deck removed and primed & painted with genuine JD green. Mounting hardware replaced with stainless steel. New factory decals installed.
Deluxe high back John Deere seat & suspension from X-series installed. Seat safety switch works properly.
Hydraulic fluid and filter replaced
Thermostat and coolant replaced
New John Deere / Denso Igniter module (21119-2120)
New Implement Relief Valve installed
New fuel pump and fuel line installed
Oil & filter changes every 50 hours and chassis lube
New air filter
Metal valve covers installed
Carlisle All Trail 23x10.5-12 4-ply HDAPs installed on rear and filled with RV antifreeze. You do not need chains for snow work with proper ballast
Kenda 16x6.5-8 Terra Trac 4-ply HDAPs install on front
Installed updated genuine John Deere carb (MIA12362) which includes the fuel shutoff solenoid
Updated halogen lights (796) in front, LEDs in rear
Rear light retention brackets
The only nits this unit has are that the front grill has a couple of cracked vertical plastic pieces I've never gotten around to epoxying.
See it effortlessly handling snow here: https://youtu.be/DAp7bBi_w_0
Loader has (4) new JD main hoses that I just installed last fall. No leaks anywhere and all cylinders and pins move smoothly as they should.
I am including the original owner's manual, actual JD loader manual, and a printed Tuff Torq K92 (transmission/transaxle) service manual. I also have service notes from previous owner who also did proper maintenance at their local JD dealer.
Price for just tractor $2100
Price for just Model 40 loader $2750
Buy together with the loader all mounted as pictured for $4,750. Cash only.
If you want just the loader or just the tractor please allow about 2 hours to remove the loader, the subframe, and the relief valve & lever.
I can help deliver within 50 miles of 01921 and I will be glad to help you load into your vehicle or trailer. I am 1 minute off Route 95 in Northern Massachusetts.
I'm glad to answer any questions you might have.