Pallet Fork - John Deere Compacts - $400 (Chambersburg PA)
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Like Tree25Likes

Thread: Pallet Fork - John Deere Compacts - $400 (Chambersburg PA)

  1. Top | #1

    Join Date
    Mar 2014
    Last Online
    04-12-2019 @ 07:11 PM
    Location
    Long Island, NY
    Posts
    309
    Thanks
    24
    Thanked 51 Times in 36 Posts

    Pallet Fork - John Deere Compacts - $400 (Chambersburg PA)

    No affiliation. Just stumbled across this and thought it might help someone out.

    https://chambersburg.craigslist.org/...851107963.html
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  2. The Following User Says Thank You to eastcreek For This Useful Post:

    wentonbrown (04-14-2019)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    MeagerHair's Avatar
    Join Date
    Sep 2015
    Last Online
    Today @ 06:06 AM
    Location
    Cumberland Valley - PA
    Posts
    945
    Thanks
    47
    Thanked 136 Times in 91 Posts
    My rental house I just moved out of was in Turkeyfoot. Too bad I just bought a set of CIDs a couple of months ago.
    BigJim55 and Herminator like this.
    2007 2305, New to Me 12/15
    62c MMM, Independent Mid Lift
    H130 FEL, Heavy Hitch, , IMatch, Ken's Bolt on Hooks,
    N1 Sunshade, 48" Flex Hitch King Kutter,
    72" CTA Snow Pusher, CIDAttachments Forks
    LP 60” Grader Scrapper, R2 Edge Tamers
    Hitch'N Can

  5. Top | #3
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 11:09 AM
    Location
    Central New York
    Posts
    9,674
    Thanks
    1,604
    Thanked 1,272 Times in 1,038 Posts
    Did I read that right, 900# capacity
    BigJim55 and JD4044M like this.
    Pat
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & Rotary Cutter, middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    https://www.youtube.com/channel/UC8e..._as=subscriber

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4

    Join Date
    Mar 2014
    Last Online
    04-12-2019 @ 07:11 PM
    Location
    Long Island, NY
    Posts
    309
    Thanks
    24
    Thanked 51 Times in 36 Posts
    Quote Originally Posted by PJR832 View Post
    Did I read that right, 900# capacity
    I don't think the 1 series can lift more than that. Not sure some of the loaders on some 2 series can lift more either.
    BigJim55 and PJR832 like this.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  8. Top | #5
    BigJim55's Avatar
    Join Date
    Nov 2013
    Last Online
    Today @ 05:22 AM
    Location
    Schellsburg, PA
    Posts
    10,508
    Thanks
    2,731
    Thanked 1,257 Times in 996 Posts
    Quote Originally Posted by eastcreek View Post
    No affiliation. Just stumbled across this and thought it might help someone out.

    https://chambersburg.craigslist.org/...851107963.html
    i was just thinking about u the other day, when something out of the blue made me think of u, and laugh at the same time. was wondering if u had moved off the island yet?

    good to hear from ya
    eastcreek, wentonbrown and PJR832 like this.
    jim

    2006 2520 mcut, 2004 x475, 1953 model 50, 1985 318-was my Dad's,
    king kutter tiller-60", frontier-stone rake, jd-4ft brush hog, frontier-6ft back-blade, frontier-forks, 48 inch forks,
    2-54inch jd snow plows, jd-5ft-pull brush hog,

    2018 835R gas model gator-"aka" the Cadillac i say!! 6ft jd snow plow-which already has a dtac out on it. i got just about everything on it i could at the time

  9. Top | #6

    Join Date
    Mar 2014
    Last Online
    04-12-2019 @ 07:11 PM
    Location
    Long Island, NY
    Posts
    309
    Thanks
    24
    Thanked 51 Times in 36 Posts
    Quote Originally Posted by BigJim55 View Post
    i was just thinking about u the other day, when something out of the blue made me think of u, and laugh at the same time. was wondering if u had moved off the island yet?

    good to hear from ya
    Thanks!
    Still stuck on the island of high taxes and insane drivers. Not much tractor time lately. We didn't even have one snow deep enough to plow on the south shore this winter. Only started the 4110 once to move it so I could get to the wood chipper a few weeks ago.
    BigJim55 likes this.
    2005 - JD 4110, 54" front blade, 47" snow blower
    2004 - JD X595, 54" front blade
    2000 - JD 4100, 410 FEL

  10. Top | #7
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 10:59 AM
    Location
    Central Pennsylvania
    Posts
    8,752
    Thanks
    336
    Thanked 1,410 Times in 1,065 Posts
    Quote Originally Posted by PJR832 View Post
    Did I read that right, 900# capacity
    That's probably why they are selling them so cheap. It doesn't say what length the tines are. These are probably the lightest duty pallet forks out there. I'm not saying they aren't worth $400 but I see listings from this place all the time. They are a large dealer of used equipment and they usually charge top dollar for everything.

    While true they would probably work on a 1-series, I wouldn't want to subject them to much abuse as that frame is very skimpy.
    Last edited by jgayman; 03-28-2019 at 07:40 AM.
    PJR832 and JD4044M like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  11. Top | #8
    SulleyBear's Avatar
    Join Date
    Oct 2014
    Last Online
    Today @ 09:46 AM
    Location
    Beautiful beaches, moderated summer heat and lake effect snows. Right where I want to be.
    Posts
    5,893
    Thanks
    1,242
    Thanked 2,079 Times in 1,173 Posts
    If they consider those in "excellent condition", I hate to see what qualifies as "poor or average condition".

    Personally, I would place those in the "rough" condition category, major rust flaking off the powder coating and just a lot of "wear and tear" on the frame as far as scratches and dings.

    Not sure the point of the blue plastic tag photo unless it's their inventory control number or something. I know many dealers use those for inventory of new equipment but that become irrelevant once it leaves the dealership..........
    wentonbrown and JD4044M like this.

    1025R with Mauser Cab
    (10/2017)/ 120R FEL / RC2048 Mower / All of Ken's Bolt on Products / 60" HD Front Broom / 3 pt 45 Gallon Boom less Sprayer / CA2068 Core Aerator / I-Match / 54" Snow Plow w/ angling Quick Attach / Frontier 3 Pt Sprayer / Pallet Forks / 8 -42# Weights

    John Deere 455 (New in 9/1996) / MC519 Cart /60" MMM /47" Snow Thrower / 7'3" snow plow / Quick Hitch /
    4 -42# Weights / JD#10 Cart

    ExMark Lazer Z w/60" Deck , Billy Goat Blower , Full Stable of Echo Products





  12. Top | #9
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 10:59 AM
    Location
    Central Pennsylvania
    Posts
    8,752
    Thanks
    336
    Thanked 1,410 Times in 1,065 Posts
    Quote Originally Posted by SulleyBear View Post
    If they consider those in "excellent condition", I hate to see what qualifies as "poor or average condition".

    Personally, I would place those in the "rough" condition category, major rust flaking off the powder coating and just a lot of "wear and tear" on the frame as far as scratches and dings.

    Not sure the point of the blue plastic tag photo unless it's their inventory control number or something. I know many dealers use those for inventory of new equipment but that become irrelevant once it leaves the dealership..........

    I see that a lot with used dealers. It's a nice way to verify the item you saw in the photo is the same item they show you when you get to the lot.

    While I wouldn't classify them as excellent condition I wouldn't call them rough. A bit of surface rust and some scrapes is pretty normal for used farm equipment. I mean, they aren't all bent up, no broken pieces and the tines look straight. I would call them "good" condition.

    I've seen some "rough" fork sets. The first question that usually comes to mind is "Are you sure they were a set of forks?" :-)
    Last edited by jgayman; 03-28-2019 at 11:21 AM.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  13. Top | #10
    cashxx's Avatar
    Join Date
    Oct 2018
    Last Online
    Today @ 12:18 AM
    Location
    Beaver Falls, PA
    Posts
    159
    Thanks
    3
    Thanked 18 Times in 17 Posts
    They are a little rough looking! I seen a post on facebook from around that area for the same ones for $490 that were new. They were 36". Leese Farm Equipment or something out of Needmore, PA. If they weren't 3.5hrs away I may have went and bought them. They are about 190lbs and light compared to others. Good Works Tractor I think sell these as well for $600 plus shipping and tax! I found the HLA local for $687 for 36" at 190lbs and 42" $710 at 205lbs.
    JD4044M likes this.
    Tractor Info: 2018 1025r (01/18/2018) 120R FEL 53" Bucket 260B BH with 16" Bucket 60" MMM with Auto Connect R4 Tires
    Upgrades: RimGuard in Rear Tires 16" BackHoe Bucket Engine Block Heater JD Seat Cover 3D Printed Pedal Covers 3D Differential Pedal
    Attachments: 5' Rear Blade JD Ballast Box HLA 36" Forks
    Planned upgrades at some point: Edge Tamers King Kutter 48" Tiller Ken's Bolt-on Hooks for Loader Bucket HH Rear Receiver Hitch Plate HH Toothbar HH QA Front Weight Bracket

  14. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Way to attach pallet to Artillian pallet forks to allow the pallet to be dumped?
    By jermedic in forum Sub Compact Utility Tractors (SCUT)
    Replies: 9
    Last Post: 03-01-2017, 09:51 PM
  2. Replies: 2
    Last Post: 01-03-2016, 08:02 PM
  3. newbie needs opinion of Deere sub & compacts tractors
    By 92lx178htx in forum New Member Introductions
    Replies: 21
    Last Post: 12-26-2012, 10:11 AM
  4. Replies: 13
    Last Post: 08-09-2012, 08:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •