Control for Loader
Results 1 to 6 of 6
Like Tree1Likes
  • 1 Post By Jeff B

Thread: Control for Loader

  1. Top | #1
    45frank's Avatar
    Join Date
    Aug 2016
    Last Online
    06-26-2018 @ 01:48 PM
    Location
    Western NC
    Posts
    30
    Thanks
    0
    Thanked 1 Time in 1 Post

    Control for Loader

    Good day all.
    The last few weeks when I use my loader which is all the time the lever seems to get stuck at least once. It is a solid hard stuck. It's for the up and down control. I sprayed up the linkage but still seams to do it. Is there anything internally that would get stuck solid. I will ignore it for just a few minutes then it works fine again. I've tried shutting it down and letting it sit and it will still be hard, then it just works again.
    Any ideas?
    DON'T ASK, NO TOOLS LOANED
    JD 2305
    200X FEL
    60" K-K R.D. Finish Mower
    Pittsburgh/Taylor-Way Tiller
    EMCO Auger 9" bit
    5' Pittsburgh Scrape Blade
    48" Cultivator / Hiller
    Homelite Super XL 37+ yrs and still humming
    Homelite XL 39+ yrs and chugging along
    Homelite XL 25 yrs+ and humming away
    Echo weedeater SRM251E
    TroyBilt Log Splitter

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Mar 2015
    Last Online
    01-26-2019 @ 12:01 AM
    Location
    finger lakes, ny
    Posts
    424
    Thanks
    7
    Thanked 45 Times in 38 Posts
    where is it getting stuck? is it stuck for all directions, once it's stuck? or maybe you've pushed it all the way forward into the float position on accident? make sure the little knob down the inside fender of the SCV is fully pulled out.

  4. Top | #3
    45frank's Avatar
    Join Date
    Aug 2016
    Last Online
    06-26-2018 @ 01:48 PM
    Location
    Western NC
    Posts
    30
    Thanks
    0
    Thanked 1 Time in 1 Post
    Quote Originally Posted by lewisc1985 View Post
    where is it getting stuck? is it stuck for all directions, once it's stuck? or maybe you've pushed it all the way forward into the float position on accident? make sure the little knob down the inside fender of the SCV is fully pulled out.
    It gets stuck anytime in the up and down, it will still curl anytime. Definitely not in float mode.
    What knob it this? I know it's not the lock which slides thru some holes in the lever some how.
    DON'T ASK, NO TOOLS LOANED
    JD 2305
    200X FEL
    60" K-K R.D. Finish Mower
    Pittsburgh/Taylor-Way Tiller
    EMCO Auger 9" bit
    5' Pittsburgh Scrape Blade
    48" Cultivator / Hiller
    Homelite Super XL 37+ yrs and still humming
    Homelite XL 39+ yrs and chugging along
    Homelite XL 25 yrs+ and humming away
    Echo weedeater SRM251E
    TroyBilt Log Splitter

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    John Deere 1025R TLB's Avatar
    Join Date
    Jan 2014
    Last Online
    10-15-2019 @ 12:40 PM
    Location
    Scranton, PA Area
    Posts
    2,450
    Thanks
    114
    Thanked 169 Times in 157 Posts
    There are grease fitting I believe under the boot I believe, or was that the hoe?

    Sent from my SM-N910V using Tapatalk
    MY2013 1025R TLB
    47" 2 stage front QT Snow Blower
    647 Tiller
    54D QT mowing deck W/ independent lift
    120H FEL W/ 49 in bucket
    260 BH W/ 12" bucket
    Homemade 10 Kw PTO Driven Generator (Timing Belt Driven 2000RPM input, from front PTO)
    1972 Homelite XL12 inherited from Dad going strong!
    Stihl FS90 String Trimmer
    Mantis Rotary Tiller
    ABI 5ft. Heavy Duty Landscape Rake

  7. Top | #5

    Join Date
    Sep 2015
    Last Online
    Today @ 06:00 PM
    Location
    Burton, Ohio
    Posts
    2,757
    Thanks
    542
    Thanked 440 Times in 348 Posts
    I think it has four Heim style joints under the boot? Might be one rotated to an unfavorable position.
    Levi likes this.
    1025R FILB, vintage: 2015
    54D MM mowing deck
    Imatch hitch
    2 inch receiver for three point
    "18" cart
    Piranha Tooth Bar
    Ken's hooks and differential lock pedal
    Artillian 36" forks
    Stihl equipment: Saws; MS261C, MS462C, MS661RCM and Blower; BR600 and Trimmer; FS70R and Hedge Cutter; HL 56K and Pressure Washer; RB400
    Husky log splitter

  8. Top | #6
    45frank's Avatar
    Join Date
    Aug 2016
    Last Online
    06-26-2018 @ 01:48 PM
    Location
    Western NC
    Posts
    30
    Thanks
    0
    Thanked 1 Time in 1 Post
    OK looks like I'm going to have to take the front panel off below the seat to look closer. I see no boot. It looks like the up and down are straight forward to the rod on the hydraulics.
    DON'T ASK, NO TOOLS LOANED
    JD 2305
    200X FEL
    60" K-K R.D. Finish Mower
    Pittsburgh/Taylor-Way Tiller
    EMCO Auger 9" bit
    5' Pittsburgh Scrape Blade
    48" Cultivator / Hiller
    Homelite Super XL 37+ yrs and still humming
    Homelite XL 39+ yrs and chugging along
    Homelite XL 25 yrs+ and humming away
    Echo weedeater SRM251E
    TroyBilt Log Splitter

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •