Wheel weights
Results 1 to 9 of 9
Like Tree23Likes
  • 2 Post By BBarn
  • 5 Post By FredHickory
  • 8 Post By BBarn
  • 2 Post By pcabe5
  • 2 Post By PJR832
  • 1 Post By FredHickory
  • 2 Post By BBarn
  • 1 Post By BBarn

Thread: Wheel weights

  1. Top | #1

    Join Date
    Jun 2016
    Last Online
    08-28-2019 @ 10:36 AM
    Location
    Western PA - Butler County
    Posts
    470
    Thanks
    10
    Thanked 123 Times in 78 Posts

    Wheel weights

    Wheel weights - Ok experts, here's a loaded question:

    Will these fit a 1025r?
    https://pittsburgh.craigslist.org/grd/6155945402.html
    BigJim55 and joshn3448 like this.
    Without data, you are just another man with an opinion.
    ---------------------------------------------------------------------------------------------
    1025r TLB
    - 54" MMM
    - 49" 120 FEL with Piranha tooth bar
    - 260 Backhoe with 12" and 16" Buckets
    - 5' County Line Box Blade
    - FSP700 Spreader

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Sep 2013
    Last Online
    05-20-2019 @ 04:24 AM
    Location
    Sadieville, KY
    Posts
    520
    Thanks
    139
    Thanked 72 Times in 54 Posts
    The plastic-filled ones will. I have them on mine.
    pcabe5, Levi, BigJim55 and 2 others like this.
    1025R w/rear light kit, 49" H120 FEL, 12" 260 BH, 60D MMM, 2048 Rotary Cutter, BB5048L Box Blade, 50# wheel weights, 4x42#suitcase weights, 5' TSC Landscape rack, TSC modified Carry-All, 42" Titan Pallet Forks, Heavy Hitch Toothbar

    D130 JD Lawn Tractor, Polaris Ranger 400, 18' Gator Made Lowboy Trailer,

  4. Top | #3

    Join Date
    Jun 2016
    Last Online
    08-28-2019 @ 10:36 AM
    Location
    Western PA - Butler County
    Posts
    470
    Thanks
    10
    Thanked 123 Times in 78 Posts
    $60 - fit perfectly.

    Sent from my SM-G920P using Tapatalk
    Without data, you are just another man with an opinion.
    ---------------------------------------------------------------------------------------------
    1025r TLB
    - 54" MMM
    - 49" 120 FEL with Piranha tooth bar
    - 260 Backhoe with 12" and 16" Buckets
    - 5' County Line Box Blade
    - FSP700 Spreader

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Official "Groovie" Dude
    Join Date
    Jun 2011
    Last Online
    @
    Location
    N/A
    Posts
    5,663
    Thanks
    1,459
    Thanked 744 Times in 605 Posts
    Looks good.👍 The price wasn't too bad either.
    BigJim55 and PJR832 like this.

  7. Top | #5
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 07:22 PM
    Location
    Central New York
    Posts
    11,374
    Thanks
    1,903
    Thanked 1,556 Times in 1,276 Posts
    Quote Originally Posted by BBarn View Post
    $60 - fit perfectly.

    Sent from my SM-G920P using Tapatalk
    $60 for the pair you did real good, that's regular price each at a dealer.


    Sent from my iPhone using Tapatalk
    pcabe5 and BigJim55 like this.
    Pat
    #compactfarming
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  8. Top | #6

    Join Date
    Sep 2013
    Last Online
    05-20-2019 @ 04:24 AM
    Location
    Sadieville, KY
    Posts
    520
    Thanks
    139
    Thanked 72 Times in 54 Posts
    Do you notice a difference? I've never had mine off it feel the difference.
    PJR832 likes this.
    1025R w/rear light kit, 49" H120 FEL, 12" 260 BH, 60D MMM, 2048 Rotary Cutter, BB5048L Box Blade, 50# wheel weights, 4x42#suitcase weights, 5' TSC Landscape rack, TSC modified Carry-All, 42" Titan Pallet Forks, Heavy Hitch Toothbar

    D130 JD Lawn Tractor, Polaris Ranger 400, 18' Gator Made Lowboy Trailer,

  9. Top | #7

    Join Date
    Jun 2016
    Last Online
    08-28-2019 @ 10:36 AM
    Location
    Western PA - Butler County
    Posts
    470
    Thanks
    10
    Thanked 123 Times in 78 Posts
    I dug into a pile of dirt before having them on. The pile is cambered with the right side wheels being 3" or so higher than the left. When I would take full scoops and would "hang up" on the pile the right rear would come off the ground. Never enough to make me panic but enough to get your attention.

    After I put the weights on I went back to the pile and tried again. I was not able to reproduce the problem so I am saying it is better for sure.

    Sent from my SM-G920P using Tapatalk
    FredHickory and PJR832 like this.
    Without data, you are just another man with an opinion.
    ---------------------------------------------------------------------------------------------
    1025r TLB
    - 54" MMM
    - 49" 120 FEL with Piranha tooth bar
    - 260 Backhoe with 12" and 16" Buckets
    - 5' County Line Box Blade
    - FSP700 Spreader

  10. Top | #8
    mike01's Avatar
    Join Date
    Mar 2017
    Last Online
    Today @ 07:21 PM
    Location
    NY
    Posts
    1,267
    Thanks
    34
    Thanked 161 Times in 104 Posts
    Do the plastic weights scratch up the wheel?
    2019 X758, 54" Autoconnect deck
    2018 2032R, 220R Loader, dual rear SCV, hydraulic top link, SB1164 Snow Blower, RC2072 rotary cutter, BB5048L box blade, 42" Titan forks, BB2060L back blade

    Owned in the past:
    X570, X758 (2015), 1025R, X590

  11. Top | #9

    Join Date
    Jun 2016
    Last Online
    08-28-2019 @ 10:36 AM
    Location
    Western PA - Butler County
    Posts
    470
    Thanks
    10
    Thanked 123 Times in 78 Posts
    Quote Originally Posted by mike01 View Post
    Do the plastic weights scratch up the wheel?
    It doesn't look like it. I would make sure that the wheel and weight were clean before you put them on to make sure nothing is sandwiched between them. I also did new carriage bolts, washers and nylocks and snugged them up very tight so they won't wobble. It looks like they fit snug enough to not be an issue with rub/wear but I've only had them on for 2 days and not yet taken them off! (<-Others may have better insight as I haven't had enough experience with them yet)

    BTW- as far as scratched wheels go: I've quit worrying about scratched painted wheels. I've found a guy that for $15 (each) I can have a full size (13,14,15") wheel blasted, inspected and repainted. At that price if I scratch one I simply send it out to my guy and have them redone. That $15 includes demounting and remounting the tires too...
    mike01 likes this.
    Without data, you are just another man with an opinion.
    ---------------------------------------------------------------------------------------------
    1025r TLB
    - 54" MMM
    - 49" 120 FEL with Piranha tooth bar
    - 260 Backhoe with 12" and 16" Buckets
    - 5' County Line Box Blade
    - FSP700 Spreader

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •