Any 1025R owners close to Northwood, NH? Loader installation issues.
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17
Like Tree32Likes

Thread: Any 1025R owners close to Northwood, NH? Loader installation issues.

  1. Top | #1
    USAFRet's Avatar
    Join Date
    Jun 2017
    Last Online
    10-17-2019 @ 05:44 PM
    Location
    Northwood,NH
    Posts
    190
    Thanks
    6
    Thanked 12 Times in 12 Posts

    Any 1025R owners close to Northwood, NH? Loader installation issues.

    Well I received my 1025R today and the mower worked just fine. I was able to take the FEL off no problem. Now after mowing I tried to put the FEL on and no luck. Any of you have problems when you first got yours and have some suggestions? Also is there a 1025R local group of owners?

    Thanks

    PS please no laughing.... its not funny!
    Last edited by USAFRet; 06-10-2017 at 06:51 PM.
    Levi likes this.


    2017 1025R with turf tires
    H120 FEL with 53" Bucket Quick Change
    54" Autoconnect Mower, mulch kit and hyd mower lift
    54" Quick-Hitch Two Stage Snow Blower Hyd Rotator with Remote Spout Cap kit
    Ballast box with tubes
    IMatch
    Engine blanket
    LED lights
    Ken's Bolt on Hooks and rear hitch
    Country Time/Tarter 48" Tiller
    Titan carriage & 42" forks




    PS Everyone knows what a 1025R looks like so my Avatar is a picture of my two girls!!!

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Firemark's Avatar
    Join Date
    Jun 2016
    Last Online
    Today @ 06:44 AM
    Location
    Millstone, N.J.
    Posts
    910
    Thanks
    68
    Thanked 185 Times in 109 Posts
    Quote Originally Posted by USAFRet View Post
    Well I received my 1025R today and the mower worked just fine. I was able to take the FEL off no problem. Now after mowing I tried to put the FEL on and no luck. Any of you have problems when you first got yours and have some suggestions? Also is there a 1025R local group of owners?

    Thanks

    PS please no laughing.... its not funny!
    If it came off w/no problems than you should be set up to Put it back. Roll it in on center, hook your hydraulics back up and gently push the joy stick forward as you roll in. The best advice I can give you is, joy stick back when your rolling back and unhooking, and joy stick forward when your rolling forward and hooking up.
    Levi, OxPath, BigJim55 and 2 others like this.
    2016-1025 FILB, 54" FEL, 54" Front Blower, 54" MMM, Brush Guards, Front and rear LED work lights
    BXpanded-backhoe thumb, bucket teeth, backhoe dolly
    Kens hooks w/ shackles (3 on Bucket), Diff Lock Pedal, backhoe steps
    Artillian Blinders
    Bush hog SBX 480 box blade, BX 600 box Blade
    Frontier LR2060L landscape Rake w/ gauge wheels, subsoiler
    Woods RBC 60 Rear Blade
    Land Pride QH-15 quick hitch
    Everything Attachments 60" Pine Needle Raked
    Garber Easy Seed 60" drop spreader

  4. Top | #3
    CountryLakes1025R's Avatar
    Join Date
    Dec 2016
    Last Online
    06-02-2019 @ 11:33 AM
    Location
    Southern Maryland
    Posts
    527
    Thanks
    12
    Thanked 49 Times in 43 Posts
    What is the problem you are having? Getting the arms connected or the hydraulic lines?
    56FordGuy, Levi, OxPath and 1 others like this.


    --- Ed ---

    *2016 1025R TLB, 54" Auto Connect MMM w/ mulch kit, Imatch, Wheel Wts
    Artiliian 42" Forks
    JD 54 Plow Blade w/ Artillian Snow Plow System
    Ken's Bolt On Hooks & Clevis, 2x2 Bolt on Receiver, Diff Pedal, Seat Spring Upgrade, Oblong Ring Slings
    SD Hvy Hitch, Combo Cart, 53" Toothbar, Front Weight Hitch
    R2 Edge Tamers
    JD HP 45 Gallon 3-PT Hitch Sprayer
    BXpanded BH Thumb, Quick Connect, Ripper Blade, Trench Bucket
    Mower Deck Axle
    8 JD Suitcase Wts

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    etcallhome's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 06:50 AM
    Location
    Preston County WV
    Posts
    13,506
    Thanks
    3,300
    Thanked 2,504 Times in 1,613 Posts
    Did you remember ,before disconnecting your hyd lines ,,, to shut the engine off, then move joystick left right, forward-backward a couple of times.
    This makes reattaching easier but not always.
    Even if you did , put a rag about the end of the fitting ,,I press it against the frame of the tractor or frame of fel,, anything just hard so you can press the nipple on end of hoses in and release the pressure ..
    HydroHarold, Levi, OxPath and 2 others like this.
    Gene

    Have fun and be safe !!!
    USAR 8yr 8 mo SSG 99th ARCOM
    JD 1025R, H120 FEL 54" bucket, 54" mmm Auto Conn, 54" Front blade, JD back hoe ,JD IMatch, 48" Bush Hog tiller, Middlebuster from MF dealer, used King Kutter 5' rear blade, a new 47" JD Front blower and Original Tractor cab w/heater.
    We have a Red Honda Pioneer 700-4 (4 seater) w/soft top , doors, and winch.

  7. Top | #5
    raco232's Avatar
    Join Date
    Nov 2015
    Last Online
    Today @ 06:06 AM
    Location
    Memphis, Mississippi
    Posts
    575
    Thanks
    80
    Thanked 51 Times in 44 Posts
    Maybe this YouTube video will help: https://m.youtube.com/watch?v=GjNEdQjW2sI
    Gizmo2, HydroHarold, Levi and 2 others like this.
    2012 JD2520 R4's.
    200CX Loader, 49" bucket
    Imatch quick hitch
    King Kutter 60" tiller
    Howse 60" Box blade
    Howse 16" Single bottom plow
    Dirt Dog 5 Shank Chisel Plow (60")
    Homemade 3pt suitcase weight hitch
    Homemade 3pt 1 row disc hiller
    Homemade (6) shank toothbar
    (4) 2" Motorsports Wheel Spacers
    (7) 70lb suitcase weights
    Ken's bolt on hooks
    Titan 42" pallet forks

  8. The Following User Says Thank You to raco232 For This Useful Post:

    Gizmo2 (06-11-2017)

  9. Top | #6
    romcjr's Avatar
    Join Date
    Jul 2014
    Last Online
    10-06-2019 @ 04:17 PM
    Location
    Waller,TX.
    Posts
    1,121
    Thanks
    122
    Thanked 150 Times in 97 Posts
    Quote Originally Posted by CountryLakes1025R View Post
    What is the problem you are having? Getting the arms connected or the hydraulic lines?
    What he said ^^^^^^^ . Are you having issues with hyd. lines ? As was said , cycle loader control to release pressure . Good luck and let us know .
    etcallhome and Levi like this.
    Ron
    2016 1025R SILB (Self Installed Loader Backhoe)
    54 Autoconnect MMM
    JD Imatch
    Several homemade Mods
    Ken's bolt on grab hooks combo , Diff lock pedal , Oblong slings , Backhoe Steps
    Piranha tooth bar
    Artillian forks
    Armstong Ag 4' Box Blade
    Fimco 40 gal. 3 pt. sprayer
    Blue Hawk (?) Plug Aerator

    2016 x580
    Power Flow 14 Bushel Bagger
    Brushguard
    Jeff's LED Taillights
    JD Mulch Kit
    42 Hyd. Tiller

  10. Top | #7
    USAFRet's Avatar
    Join Date
    Jun 2017
    Last Online
    10-17-2019 @ 05:44 PM
    Location
    Northwood,NH
    Posts
    190
    Thanks
    6
    Thanked 12 Times in 12 Posts

    thanks

    Quote Originally Posted by Firemark View Post
    If it came off w/no problems than you should be set up to Put it back. Roll it in on center, hook your hydraulics back up and gently push the joy stick forward as you roll in. The best advice I can give you is, joy stick back when your rolling back and unhooking, and joy stick forward when your rolling forward and hooking up.

    I think I need practice
    etcallhome and Levi like this.


    2017 1025R with turf tires
    H120 FEL with 53" Bucket Quick Change
    54" Autoconnect Mower, mulch kit and hyd mower lift
    54" Quick-Hitch Two Stage Snow Blower Hyd Rotator with Remote Spout Cap kit
    Ballast box with tubes
    IMatch
    Engine blanket
    LED lights
    Ken's Bolt on Hooks and rear hitch
    Country Time/Tarter 48" Tiller
    Titan carriage & 42" forks




    PS Everyone knows what a 1025R looks like so my Avatar is a picture of my two girls!!!

  11. Top | #8
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Today @ 07:02 AM
    Location
    NE Tenn.
    Posts
    10,154
    Thanks
    2,990
    Thanked 1,899 Times in 1,065 Posts
    Quote Originally Posted by USAFRet View Post
    I think I need practice
    Best way to learn.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1˝" rear wheel spacers.
    NRA Life Member

  12. Top | #9
    WifeSaidOK's Avatar
    Join Date
    Mar 2016
    Last Online
    Yesterday @ 11:23 AM
    Location
    NH
    Posts
    907
    Thanks
    44
    Thanked 90 Times in 71 Posts
    I'm kinda near you, in Bow. But I have never taken my FEL off, so I am afraid that I will be of no help. Good luck!
    Levi likes this.
    2016 1025R TLB (Marshawn) with Piranha tooth bar
    HLA 42" Forks
    Frontier LR2060L Landscape rake
    2019 X370 mowing machine with snowblower attachment
    County Line 3 point log splitter (Mr. Splitty)
    Cyclone Rake super sucker
    Stihl MS-271 chain saw
    Stihl KM-56 Kombi powerhead, string trimmer, pole saw, articulating hedge trimmer
    Stihl BR430 backpack blower
    1998 Yamaha 4-stroke golf car (Tedy Bruschi)

  13. Top | #10
    tomd999's Avatar
    Join Date
    Jun 2011
    Last Online
    06-30-2019 @ 10:15 AM
    Location
    Manchvegas, NH area
    Posts
    1,965
    Thanks
    0
    Thanked 422 Times in 285 Posts
    Hiya,

    Sorry I didn't read this before I came back south, I drove right by 393 and could have made the detour to your place. Let me know if your still stuck on Tuesday, I can come back from the seacoast via 4 and drop by.
    Levi likes this.
    2010 3320 Cab
    Loaded R3's, 300CX w/3rd SCV
    61" HD-Tooth Bar, 72" HD-bolt-on edge, Frontier Forx
    "A" front hitch, Mid-PTO, Air ride seat, Horn, Back-up alarm, Rear work lights, External mirrors, Auto cruise
    60HD broom. 366 Blade, 59 blower, i-Match
    Looking for: Rear Wheel Weight Set

    Stuff for Sale:
    New 200CX/H130 Masts 25/2720-2032R
    New Jamison Bryce adapter, cart and chute

    “Suppose you were an idiot, and suppose you were a member of Congress; but I repeat myself” Mark Twain

  14. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •