New 1025R 3 pt issue..or not
Results 1 to 9 of 9
Like Tree19Likes
  • 1 Post By jack_pine
  • 1 Post By Littlegreenmachine
  • 4 Post By RetiredDoc
  • 2 Post By jack_pine
  • 2 Post By Ray_PA
  • 1 Post By Littlegreenmachine
  • 2 Post By Levi
  • 4 Post By Kennyd
  • 2 Post By jack_pine

Thread: New 1025R 3 pt issue..or not

  1. Top | #1
    jack_pine's Avatar
    Join Date
    May 2017
    Last Online
    07-23-2019 @ 07:49 AM
    Location
    Wisconsin
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts

    New 1025R 3 pt issue..or not

    Took delivery at new house of 1025r. Has mowed great, messed up ;loader and have a question.

    Very rough ground and every time done mowing the 3 point looks like this. Then I twist the long nut to reset height. There is a not on the top but that dose not help. Sure this is newb thing....

    The other thing I will admit to one time..Got tractor....mowed...hooked up loader...played with it...then tried to disconnect. I wet it down but the bottom support was not deployed. Not sure how I did that but it sucked to get it corrected. Probably only dufus it has happened but.....

    Click image for larger version.

Name:	IMG_3489.jpg
Views:	30
Size:	83.4 KB
ID:	391817

    Any rate, got a load of base course and here is my first project at new house.....Click image for larger version.

Name:	IMG_3492.jpg
Views:	27
Size:	81.1 KB
ID:	391825
    Last edited by jack_pine; 06-18-2017 at 03:45 PM.
    BigJim55 likes this.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    May 2017
    Last Online
    Today @ 07:00 AM
    Location
    Louisiana
    Posts
    2,405
    Thanks
    490
    Thanked 359 Times in 289 Posts
    I'm a newb too. Only had the 1025 a month or two. Just put on the 3pt the other day and had the same problem. Kept hand tightening.
    I just took 2 big crescent wrenches and haven't had the problem since
    Last edited by Littlegreenmachine; 06-18-2017 at 03:52 PM.
    BigJim55 likes this.
    LGM= Little Green Machine!!
    2018 2025TLB


    BB2048L Box blade.
    Imatch quick hitch
    AV20F grapple
    Artillian diverter kit
    3pt tractor receiver hitch
    LR2060L Landscape Rake
    LP1060L Land Plane
    Homemade quick attach forks . http://www.greentractortalk.com/foru...uild-soon.html
    *Please Lord give me the strength to add to this list when my wife isnt paying attention*

  4. Top | #3
    RetiredDoc's Avatar
    Join Date
    Apr 2016
    Last Online
    06-13-2019 @ 06:24 PM
    Location
    Central Savannah River Area (CSRA)
    Posts
    913
    Thanks
    162
    Thanked 145 Times in 110 Posts
    I had the same lift arm problem as you when I first got my tractor. Posted it here, and responses were to really tighten the nut 11 against the adjuster 12 so that it does not vibrate loose. It worked.
    Click image for larger version.

Name:	jamnut.jpg
Views:	26
Size:	42.5 KB
ID:	391881

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    jack_pine's Avatar
    Join Date
    May 2017
    Last Online
    07-23-2019 @ 07:49 AM
    Location
    Wisconsin
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by RetiredDoc View Post
    I had the same lift arm problem as you when I first got my tractor. Posted it here, and responses were to really tighten the nut 11 against the adjuster 12 so that it does not vibrate loose. It worked.
    Click image for larger version.

Name:	jamnut.jpg
Views:	26
Size:	42.5 KB
ID:	391881
    thx. I was embarrassed and pissed at my self. Have not tried it since. Did not think there was a way to do it wrong but I found it.
    HydroHarold and BigJim55 like this.

  7. Top | #5
    Ray_PA's Avatar
    Join Date
    Dec 2013
    Last Online
    Yesterday @ 10:17 AM
    Location
    North of Harrisburg, PA
    Posts
    1,928
    Thanks
    138
    Thanked 559 Times in 337 Posts
    The jam nut on the 3 point lift link and top link need to be tightened or as you found, they will vibrate while working the tractor.
    JD 1025 TLB (2013) ** 60D 7 Iron MMM w/auto-connect ** H120 FEL** 260 BH ** 54" snowblower ** 54" blade ** 52" Front Broom ** Ken's Bolt on Hooks ** Frontier BB2048L box scraper ** County Line 5' landscape rake ** JD Hydraulic Dump MCS ** Artillian Forks w/36" Forks ** JD 3 - Point Ballast Box ** JD I-Match Quick Hitch ** Heavy Hitch front Weight Bar ** Heavy Hitch 3 Point Weight Bar ** Fimco 40 Gallon Sprayer ** EA Aerator ** FitRite Hydraulics Rear SCV ** 12 - 40# suitcase weights

  8. Top | #6

    Join Date
    May 2017
    Last Online
    Today @ 07:00 AM
    Location
    Louisiana
    Posts
    2,405
    Thanks
    490
    Thanked 359 Times in 289 Posts
    Quote Originally Posted by RetiredDoc View Post
    I had the same lift arm problem as you when I first got my tractor. Posted it here, and responses were to really tighten the nut 11 against the adjuster 12 so that it does not vibrate loose. It worked.
    Click image for larger version.

Name:	jamnut.jpg
Views:	26
Size:	42.5 KB
ID:	391881
    Yep. That's it. Guess it would have helped if I mentioned what i tightened with the wrenches
    BigJim55 likes this.
    LGM= Little Green Machine!!
    2018 2025TLB


    BB2048L Box blade.
    Imatch quick hitch
    AV20F grapple
    Artillian diverter kit
    3pt tractor receiver hitch
    LR2060L Landscape Rake
    LP1060L Land Plane
    Homemade quick attach forks . http://www.greentractortalk.com/foru...uild-soon.html
    *Please Lord give me the strength to add to this list when my wife isnt paying attention*

  9. Top | #7
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Today @ 07:29 AM
    Location
    NE Tenn.
    Posts
    10,154
    Thanks
    2,990
    Thanked 1,899 Times in 1,065 Posts
    Quote Originally Posted by jack_pine View Post
    Took delivery at new house of 1025r. Has mowed great, messed up ;loader and have a question.

    Very rough ground and every time done mowing the 3 point looks like this. Then I twist the long nut to reset height. There is a not on the top but that dose not help. Sure this is newb thing....

    The other thing I will admit to one time..Got tractor....mowed...hooked up loader...played with it...then tried to disconnect. I wet it down but the bottom support was not deployed. Not sure how I did that but it sucked to get it corrected. Probably only dufus it has happened but.....

    Click image for larger version.

Name:	IMG_3489.jpg
Views:	30
Size:	83.4 KB
ID:	391817

    Any rate, got a load of base course and here is my first project at new house.....Click image for larger version.

Name:	IMG_3492.jpg
Views:	27
Size:	81.1 KB
ID:	391825
    Looks like they answered the 3PH problem. As for the FEL, did you leave it locked when you dropped it? You need to leave it locked on till you drop the FEL and slightly raise the front of the tractor and then unlock it and then remove it.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1" rear wheel spacers.
    NRA Life Member

  10. Top | #8
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 07:30 AM
    Location
    Westminster, MD
    Posts
    16,424
    Thanks
    5,051
    Thanked 4,082 Times in 2,548 Posts
    pcabe5, Levi, RetiredDoc and 1 others like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  11. Top | #9
    jack_pine's Avatar
    Join Date
    May 2017
    Last Online
    07-23-2019 @ 07:49 AM
    Location
    Wisconsin
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Levi View Post
    Looks like they answered the 3PH problem. As for the FEL, did you leave it locked when you dropped it? You need to leave it locked on till you drop the FEL and slightly raise the front of the tractor and then unlock it and then remove it.
    This is the bigger issue to me as a newb. I thought there was no way to screw this up and I found it. Will try again in the next couple of weeks and report back.
    Levi and BigJim55 like this.

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts