Wiring for 1026r tail lights
Results 1 to 10 of 10
Like Tree11Likes
  • 2 Post By chex313
  • 1 Post By Drifterbike
  • 1 Post By CountryLakes1025R
  • 1 Post By mdgilbreath
  • 1 Post By chex313
  • 5 Post By mdgilbreath

Thread: Wiring for 1026r tail lights

  1. Top | #1
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts

    Wiring for 1026r tail lights

    Wiring diagram for 1026r tail lights that run thru rops?
    Broke Left hand light off rops now it won't start. All fuses are checked and good, head lighting and fender work lights work, 12volt accessory plug works also
    won't start and no dash lights at all ?



    Sent from my iPhone using Tapatalk
    Last edited by mdgilbreath; 06-21-2017 at 09:00 PM.
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    chex313's Avatar
    Join Date
    Dec 2012
    Last Online
    Today @ 06:54 PM
    Location
    SE. PA.
    Posts
    895
    Thanks
    146
    Thanked 95 Times in 82 Posts
    Maybe a a hot wire is grounding, can you pull the fuse for the lights and see if it starts? I'll look for the diagram, but i"m sure someone will beat me to it...
    Attached Thumbnails Attached Thumbnails lights.jpg  
    Last edited by chex313; 06-21-2017 at 04:59 PM.
    mdgilbreath and PJR832 like this.
    Dave's 2012 1026R TLB,54"MMM Auto Attach,Ken's hooks&clevis,Artillian 36' Forks and a KennyPedal WH 520H 48" Snow Blade,48" Deck379 Peterbuilt (3 Million Miles in a big truck)

  4. The Following User Says Thank You to chex313 For This Useful Post:

    mdgilbreath (06-21-2017)

  5. Top | #3
    Drifterbike's Avatar
    Join Date
    Jul 2015
    Last Online
    Today @ 03:00 PM
    Location
    Hampton Ill
    Posts
    2,714
    Thanks
    1,084
    Thanked 317 Times in 278 Posts
    I shorted the third fuse down 10 amp and my 1025r would not start.
    PJR832 likes this.
    2018 2038R 220R FEL, 72" Mower, Radial tires, wheel spacers, dual rear SVCs, CtA grapple, single point for FEL, 60" broom with front hitch;2018 1025R 54"auto connect, HDAP tires, Quick Hitch, Ballast Box, Etc...;1967 1020 3cylinder gas, #47 FEL, 72" Landpride Grooming Mower, 6ft box blade, For Sale(no Hurry); life Member NRA since 1974

  6. The Following User Says Thank You to Drifterbike For This Useful Post:

    mdgilbreath (06-21-2017)

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4
    CountryLakes1025R's Avatar
    Join Date
    Dec 2016
    Last Online
    06-02-2019 @ 11:33 AM
    Location
    Southern Maryland
    Posts
    527
    Thanks
    12
    Thanked 49 Times in 43 Posts
    I think you probably blew a fuse when the wires shorted.
    mdgilbreath likes this.


    --- Ed ---

    *2016 1025R TLB, 54" Auto Connect MMM w/ mulch kit, Imatch, Wheel Wts
    Artiliian 42" Forks
    JD 54 Plow Blade w/ Artillian Snow Plow System
    Ken's Bolt On Hooks & Clevis, 2x2 Bolt on Receiver, Diff Pedal, Seat Spring Upgrade, Oblong Ring Slings
    SD Hvy Hitch, Combo Cart, 53" Toothbar, Front Weight Hitch
    R2 Edge Tamers
    JD HP 45 Gallon 3-PT Hitch Sprayer
    BXpanded BH Thumb, Quick Connect, Ripper Blade, Trench Bucket
    Mower Deck Axle
    8 JD Suitcase Wts

  9. Top | #5
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts

    wiring for tail lights on rops

    Quote Originally Posted by mdgilbreath View Post
    Wiring diagram for 1026r tail lights that run thru rops?
    Broke Left hand light off rops now it won't start. All fuses are checked and good, head lighting and fender work lights work,
    won't start and no dash lights at all ?



    Sent from my iPhone using Tapatalk
    Double checked fuse again none are bad, but i did notice temp gauge and rpm gauge hands are still sitting at operating range as if it were running
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  10. Top | #6
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts
    Quote Originally Posted by CountryLakes1025R View Post
    I think you probably blew a fuse when the wires shorted.
    Have checked them twice and none are blown.


    Sent from my iPhone using Tapatalk
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  11. Top | #7
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts
    Quote Originally Posted by chex313 View Post
    Maybe a a hot wire is grounding, can you pull the fuse for the lights and see if it starts? I'll look for the diagram, but i"m sure someone will beat me to it...
    Tried that no start either


    Sent from my iPhone using Tapatalk
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  12. Top | #8
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts

    Wiring for 1026r tail lights

    Talked to my dealer this morning Tri Green in Cookeville,TN. they said it would be Monday before they could be here to pick up for service. He told me if I had a volt meter I could start tracking wires from ignition switch to all locations leads to locate a possible dead short.



    Sent from my iPhone using Tapatalk
    Last edited by mdgilbreath; 06-22-2017 at 01:26 PM.
    chex313 likes this.
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  13. Top | #9
    chex313's Avatar
    Join Date
    Dec 2012
    Last Online
    Today @ 06:54 PM
    Location
    SE. PA.
    Posts
    895
    Thanks
    146
    Thanked 95 Times in 82 Posts
    Quote Originally Posted by mdgilbreath View Post
    Talked to my dealer this morning Tri Green in Cookeville,TN. they said it would be Monday before they could be here to pick up for service. He told me if I had a volt meter I could start tracking wires from ignition switch to all locations leads to locate a possible dead short.



    Sent from my iPhone using Tapatalk
    Good luck MD,hope you get to the bottom of it sooner rather than later...
    mdgilbreath likes this.
    Dave's 2012 1026R TLB,54"MMM Auto Attach,Ken's hooks&clevis,Artillian 36' Forks and a KennyPedal WH 520H 48" Snow Blade,48" Deck379 Peterbuilt (3 Million Miles in a big truck)

  14. Top | #10
    mdgilbreath's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:00 PM
    Location
    Carthage ,Tn
    Posts
    227
    Thanks
    47
    Thanked 15 Times in 11 Posts
    Found my dead short today it was a fuse I checked with my meter instead of a visual check.
    Now got to replace light and relocate to inside rops so this doesn't happen again.


    Sent from my iPhone using Tapatalk
    Kind Regards
    mdgilbreath




    1026R with H120 FEL with a WR Long Tooth Bar
    Kens Bolt on Grab Hooks http://www.boltonhooks.com
    54" Deck mower quick detach
    48" Frontier bush hog -2048
    48" Frontier box blade -2048
    JD imatch hitch
    25 Gallon 12 volt Sprayer County Line from TSC
    3 Point hitch rig with a 2" receiver bar for sprayer mount
    2" Ball mount to pull utility trailer

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •