Adjusting loader joystick controls
Results 1 to 10 of 10
Like Tree8Likes
  • 1 Post By dieselshadow
  • 1 Post By W9GFO
  • 4 Post By MrZeeno
  • 2 Post By felixm22

Thread: Adjusting loader joystick controls

  1. Top | #1
    MrZeeno's Avatar
    Join Date
    Apr 2012
    Last Online
    10-07-2019 @ 08:31 PM
    Location
    New Jersey
    Posts
    97
    Thanks
    14
    Thanked 9 Times in 6 Posts

    Adjusting loader joystick controls

    I'm sure I've seen this topic discussed before but couldn't find the threat. Perhaps someone could help. The H120 loader on my 2012 1026R won't fully roll back; it stops before even reaching level. Continuing to pull back on the stick causes it to dump. Raising and lowering the bucket is normal. Fluid levels normal. Tractor is garage kept and no fluid leaks detected.
    JD 1026R w/H120 Loader, iMatch, Frontier RC2048 rotary cutter,Frontier BB2048 Box Blade, BW15073 Ballast Box, 54" front mounted snow blower.
    JD X310 w/ 42" mower, hydraulic lift, power steering, and rear bagging system
    JD 180 w/46" mower "The Beast"

    "Time is luck, and no one owns the future. Go buy that tractor today!"

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 10:00 AM
    Location
    Westminster, MD
    Posts
    16,425
    Thanks
    5,053
    Thanked 4,082 Times in 2,548 Posts
    Here is the joystick:
    Click image for larger version. 

Name:	1026.jpg 
Views:	48 
Size:	46.2 KB 
ID:	25545

    But from your description I'm not sure thats the problem. Has the recall been performed (replacement valve)?
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. Top | #3
    MrZeeno's Avatar
    Join Date
    Apr 2012
    Last Online
    10-07-2019 @ 08:31 PM
    Location
    New Jersey
    Posts
    97
    Thanks
    14
    Thanked 9 Times in 6 Posts

    No recall

    But I did call about it and was told my tractor (serial #) wasn't included in the FBS recall.
    JD 1026R w/H120 Loader, iMatch, Frontier RC2048 rotary cutter,Frontier BB2048 Box Blade, BW15073 Ballast Box, 54" front mounted snow blower.
    JD X310 w/ 42" mower, hydraulic lift, power steering, and rear bagging system
    JD 180 w/46" mower "The Beast"

    "Time is luck, and no one owns the future. Go buy that tractor today!"

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    etcallhome's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 07:33 AM
    Location
    Preston County WV
    Posts
    13,507
    Thanks
    3,300
    Thanked 2,504 Times in 1,613 Posts
    Quote Originally Posted by MrZeeno View Post
    I'm sure I've seen this topic discussed before but couldn't find the threat. Perhaps someone could help. The H120 loader on my 2012 1026R won't fully roll back; it stops before even reaching level. Continuing to pull back on the stick causes it to dump. Raising and lowering the bucket is normal. Fluid levels normal. Tractor is garage kept and no fluid leaks detected.
    Pulling back on lever shouldn't dump the bucket.. Not saying hoses are connected wrong ,but could they be connected to wrong ports..

    R Bl on left side and y black on inside. I know for mine yellow and black are reversed what what they were on my old tractors. yellow is on bottom not top.
    Gene

    Have fun and be safe !!!
    USAR 8yr 8 mo SSG 99th ARCOM
    JD 1025R, H120 FEL 54" bucket, 54" mmm Auto Conn, 54" Front blade, JD back hoe ,JD IMatch, 48" Bush Hog tiller, Middlebuster from MF dealer, used King Kutter 5' rear blade, a new 47" JD Front blower and Original Tractor cab w/heater.
    We have a Red Honda Pioneer 700-4 (4 seater) w/soft top , doors, and winch.

  7. Top | #5
    MrZeeno's Avatar
    Join Date
    Apr 2012
    Last Online
    10-07-2019 @ 08:31 PM
    Location
    New Jersey
    Posts
    97
    Thanks
    14
    Thanked 9 Times in 6 Posts
    Quote Originally Posted by etcallhome View Post
    Pulling back on lever shouldn't dump the bucket.. Not saying hoses are connected wrong ,but could they be connected to wrong ports..

    R Bl on left side and y black on inside. I know for mine yellow and black are reversed what what they were on my old tractors. yellow is on bottom not top.
    Not very likely since the loader was connected prior to delivery; has never been off the tractor and worked flawlessly until this weekend
    JD 1026R w/H120 Loader, iMatch, Frontier RC2048 rotary cutter,Frontier BB2048 Box Blade, BW15073 Ballast Box, 54" front mounted snow blower.
    JD X310 w/ 42" mower, hydraulic lift, power steering, and rear bagging system
    JD 180 w/46" mower "The Beast"

    "Time is luck, and no one owns the future. Go buy that tractor today!"

  8. Top | #6
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Yesterday @ 09:26 PM
    Location
    Joelton TN
    Posts
    19,927
    Thanks
    1,067
    Thanked 4,329 Times in 2,601 Posts
    Quote Originally Posted by MrZeeno View Post
    Not very likely since the loader was connected prior to delivery; has never been off the tractor and worked flawlessly until this weekend
    I would still check your QD's. It's very possible one of them has popped loose causing your issue.
    etcallhome likes this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  9. Top | #7
    MrZeeno's Avatar
    Join Date
    Apr 2012
    Last Online
    10-07-2019 @ 08:31 PM
    Location
    New Jersey
    Posts
    97
    Thanks
    14
    Thanked 9 Times in 6 Posts
    Quote Originally Posted by dieselshadow View Post
    I would still check your QD's. It's very possible one of them has popped loose causing your issue.

    Thanks for the advice.
    I'll check them tomorrow.
    JD 1026R w/H120 Loader, iMatch, Frontier RC2048 rotary cutter,Frontier BB2048 Box Blade, BW15073 Ballast Box, 54" front mounted snow blower.
    JD X310 w/ 42" mower, hydraulic lift, power steering, and rear bagging system
    JD 180 w/46" mower "The Beast"

    "Time is luck, and no one owns the future. Go buy that tractor today!"

  10. Top | #8

    Join Date
    Dec 2013
    Last Online
    Today @ 01:06 PM
    Location
    Western WA
    Posts
    1,217
    Thanks
    8
    Thanked 150 Times in 125 Posts
    Quote Originally Posted by dieselshadow View Post
    I would still check your QD's. It's very possible one of them has popped loose causing your issue.
    +1 - same thing happened to me last week, turned out that one of the quick disconnects had come loose - probably because of a stick.
    MrZeeno likes this.

  11. Top | #9
    MrZeeno's Avatar
    Join Date
    Apr 2012
    Last Online
    10-07-2019 @ 08:31 PM
    Location
    New Jersey
    Posts
    97
    Thanks
    14
    Thanked 9 Times in 6 Posts

    Cool Problem solved!

    This forum is extraordinary in offering information, advice, and even occasional grief counseling. Despite my great love for my 1026R and my X310, I'm out of my element because my day job is broadcast television production and engineering. So when I have a problem with one of my tractors, I ALWAYS come here first. And what looked like a really serious issue ---CBS ---no....not Columbia Broadcasting Service, but Crazy Bucket Syndrome --- was a simple but fiendishly deceptive problem; a hydraulic quick disconnect popped PARTIALLY out. After reading the replies here, especially the gentleman who had the EXACT same problem, I knew I could relax and be back in bid-ness in short order. Today was the first day I could get the tractor out and inspect, and sure enough, one of the hoses was disconnected. I pulled all four, cleaned them, and was done in a couple of minutes. Just in time for what is expected to be 6-12 inches of late winter storm for us Sunday night into Monday. Hopefully, this won't happen again; I'll watch the sticks pointing up next time although I do wish there was some sort of guard around the QD's. Anyways, THANK YOU EVERYONE!!!!!!!
    JD 1026R w/H120 Loader, iMatch, Frontier RC2048 rotary cutter,Frontier BB2048 Box Blade, BW15073 Ballast Box, 54" front mounted snow blower.
    JD X310 w/ 42" mower, hydraulic lift, power steering, and rear bagging system
    JD 180 w/46" mower "The Beast"

    "Time is luck, and no one owns the future. Go buy that tractor today!"

  12. Top | #10
    felixm22's Avatar
    Join Date
    May 2013
    Last Online
    10-04-2019 @ 02:29 PM
    Location
    Concord, NH
    Posts
    3,964
    Thanks
    320
    Thanked 453 Times in 340 Posts
    Quote Originally Posted by MrZeeno View Post
    . . .I do wish there was some sort of guard around the QD's.
    psrumors went a bit over the top but it would be hard do accidentally disconnect.

    http://www.greentractortalk.com/foru...installed.html
    MrZeeno and psrumors like this.
    John Deere 318, 50in deck, 54in blade w/ power angle

    Looking for JD Parts check here on JD's official parts website.

    Have no idea where to start with JD Parts check here for a how to.

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Adjusting diff lock for 1026
    By boatdesigner in forum Sub Compact Utility Tractors (SCUT)
    Replies: 10
    Last Post: 09-16-2013, 09:36 AM
  2. 1023 Joystick
    By FreeWill in forum Sub Compact Utility Tractors (SCUT)
    Replies: 7
    Last Post: 11-20-2012, 04:47 PM
  3. Need help adjusting back wheels on model 70
    By green and red man in forum Johnny Poppers
    Replies: 7
    Last Post: 09-26-2012, 08:07 PM
  4. Adjusting regen?
    By rockshaft in forum Sub Compact Utility Tractors (SCUT)
    Replies: 8
    Last Post: 09-12-2012, 06:07 PM
  5. "Pistol Grip" Handle & Switch Loader Controls - 3x and 4x20's
    By Spudland_Dave in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 10
    Last Post: 12-09-2010, 01:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •