new 1025r owner ?
Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By psrumors

Thread: new 1025r owner ?

  1. Top | #1

    Join Date
    Feb 2014
    Last Online
    06-18-2016 @ 01:13 PM
    Location
    south central PA
    Posts
    153
    Thanks
    2
    Thanked 21 Times in 13 Posts

    new 1025r owner ?

    Does anybody know who can tell me what the amp rating is for the 12 volt outlet on the 1025r?

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jbtb2002's Avatar
    Join Date
    Jun 2013
    Last Online
    03-22-2016 @ 09:33 PM
    Location
    New Richland, Mn
    Posts
    7
    Thanks
    12
    Thanked 0 Times in 0 Posts
    It can handle up to 15 amps
    Jason
    2013 JD1025r 60d auto connect mmm, H120 fel, Ken's bolt on hooks, 3rd Scv, 40 gal. Fimco sprayer, 54" MK Martin 3ph snowblower.

  4. Top | #3

    Join Date
    Feb 2014
    Last Online
    06-18-2016 @ 01:13 PM
    Location
    south central PA
    Posts
    153
    Thanks
    2
    Thanked 21 Times in 13 Posts

    Smile

    thanks, I read thru the owners manual and far as I could see it does not tell you that anywhere. Mind if I ask "how do you know that"?

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Jan 2012
    Last Online
    Today @ 05:08 AM
    Location
    East Central Indiana
    Posts
    1,483
    Thanks
    94
    Thanked 241 Times in 173 Posts
    It is connected to a 15 amp fuse.
    Kioti CK3510SE HST, Kioti KL4030 Loader, John Deere 655 Tiller, Frontier LR2072 Landscape Rake, Virnig V50 Pallet Forks, Woods GB60 Box Blade
    John Deere X739 AWS 4X4, 60HC Auto Connect Deck, Front grader blade.
    John Deere 825i Gator

    John Deere Tractors I have owned in the past.
    425 AWS, 455, 4400, 2210, 4710, 2320, 2720, X475, 1026R, 4120, 2025R

  7. Top | #5

    Join Date
    Feb 2014
    Last Online
    06-18-2016 @ 01:13 PM
    Location
    south central PA
    Posts
    153
    Thanks
    2
    Thanked 21 Times in 13 Posts
    Duh! well don't I feel like a dumba..! Laughing at myself. Thanks
    Its been colder than all get out here since I got the tractor and I have not yet had the opportunity to go over it real well. I don't yet even know where the fuse panel is. I am so ready for warm weather or at least a bit above freezing. Thanks again.

  8. Top | #6
    jbtb2002's Avatar
    Join Date
    Jun 2013
    Last Online
    03-22-2016 @ 09:33 PM
    Location
    New Richland, Mn
    Posts
    7
    Thanks
    12
    Thanked 0 Times in 0 Posts
    If you look on page 12-6 of your operators manual it'll show you all the fuses. Are you thinking about adding extra lights?
    Jason
    2013 JD1025r 60d auto connect mmm, H120 fel, Ken's bolt on hooks, 3rd Scv, 40 gal. Fimco sprayer, 54" MK Martin 3ph snowblower.

  9. Top | #7

    Join Date
    Feb 2014
    Last Online
    06-18-2016 @ 01:13 PM
    Location
    south central PA
    Posts
    153
    Thanks
    2
    Thanked 21 Times in 13 Posts
    Well, now I really feel like a dumba..! Thanks you guys are great.Yep page 12-6
    No ,I'm not adding lights the ones on the tractor are incredible. It was for a crazy improbable idea for a poor guy with a new tractor (that he is unfamiliar with) that's up to his neck in broken down trees and tops. Maybe you all can help me out with this.
    I want to add an "add a grapple" type DIY device to the loader.
    It has since occurred to me, and correct me if I'm wrong. I could use the backhoe hydraulic line to power an extra cylinder on the loader bucket for a Grapple. Am I right on this?? Obviously I'd drop the hoe, but I'm thinking I could then run a hose from the back, up front thru a valve of some type and back to power an extra cylinder on the loader to operate a grapple.?? Am I on the right track here, is that workable?

  10. Top | #8

    Join Date
    Aug 2013
    Last Online
    10-19-2019 @ 08:57 PM
    Location
    Cartersville (NW) GA
    Posts
    2,380
    Thanks
    103
    Thanked 365 Times in 267 Posts
    The correct way to run a grapple would be to buy the Artillian hydraulic kit.

    Hydraulic Products
    Kennyd likes this.
    1025r TLB w 60D MMM & Independent Lift
    SN 114287 Built April '13 received 8/21/13
    180 degree thermostat
    Omni Transformer w/ integrated weight bracket
    Single Point
    Ken's Bolt on hooks
    Artillian Forks (42")
    Full Compliment of Wheel Weights (340lbs)
    Custom Seat Springs

    Kubota 326H 72" deck ZTR

    Stihl MS361, FS250R

  11. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •