3rd SCV on a 1026R
Results 1 to 5 of 5

Thread: 3rd SCV on a 1026R

  1. Top | #1

    Join Date
    Jan 2012
    Last Online
    Today @ 05:49 AM
    Location
    East Central Indiana
    Posts
    1,479
    Thanks
    94
    Thanked 241 Times in 173 Posts

    3rd SCV on a 1026R

    What are the options for adding a 3rd SCV on the rear of a 1026R?
    Kioti CK3510SE HST, Kioti KL4030 Loader, John Deere 655 Tiller, Frontier LR2072 Landscape Rake, Virnig V50 Pallet Forks, Woods GB60 Box Blade
    John Deere X739 AWS 4X4, 60HC Auto Connect Deck, Front grader blade.
    John Deere 825i Gator

    John Deere Tractors I have owned in the past.
    425 AWS, 455, 4400, 2210, 4710, 2320, 2720, X475, 1026R, 4120, 2025R

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Aug 2013
    Last Online
    Today @ 06:00 AM
    Location
    Cartersville (NW) GA
    Posts
    2,380
    Thanks
    103
    Thanked 365 Times in 267 Posts
    There is a Deere kit BLV10351 for the 3rd SCV (not compatible with the power beyond).

    What is trying to be accomplished?
    Last edited by psrumors; 03-12-2014 at 09:42 AM.
    1025r TLB w 60D MMM & Independent Lift
    SN 114287 Built April '13 received 8/21/13
    180 degree thermostat
    Omni Transformer w/ integrated weight bracket
    Single Point
    Ken's Bolt on hooks
    Artillian Forks (42")
    Full Compliment of Wheel Weights (340lbs)
    Custom Seat Springs

    Kubota 326H 72" deck ZTR

    Stihl MS361, FS250R

  4. Top | #3
    Fit Rite Hydraulics MtnViewRanch's Avatar
    Join Date
    Nov 2012
    Last Online
    Today @ 02:51 PM
    Location
    Southern California
    Posts
    633
    Thanks
    89
    Thanked 128 Times in 103 Posts
    Do you only need one valve, or would multiple rear SCVs work out better?

    Like was previously asked, what is it that you want to control???

    Take a look here for multiple rear SCVs.
    Last edited by MtnViewRanch; 03-12-2014 at 10:00 AM.
    Brian

    Manufacturer of Fit Rite Hydraulics

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Jan 2012
    Last Online
    Today @ 05:49 AM
    Location
    East Central Indiana
    Posts
    1,479
    Thanks
    94
    Thanked 241 Times in 173 Posts
    Thank you for the replies & link.

    I plan to get a independent lift for the mower deck, a hydraulic dump trailer & a hydraulic top link.
    My first thoughts were to add just one SCV on the rear, but after seeing the slides in the link, I am thinking the cost would not be a lot more to add 2 or 3.

    Brian, am I correct in thinking that the rear valve is dead when the backhoe is on?
    Kioti CK3510SE HST, Kioti KL4030 Loader, John Deere 655 Tiller, Frontier LR2072 Landscape Rake, Virnig V50 Pallet Forks, Woods GB60 Box Blade
    John Deere X739 AWS 4X4, 60HC Auto Connect Deck, Front grader blade.
    John Deere 825i Gator

    John Deere Tractors I have owned in the past.
    425 AWS, 455, 4400, 2210, 4710, 2320, 2720, X475, 1026R, 4120, 2025R

  7. Top | #5
    Fit Rite Hydraulics MtnViewRanch's Avatar
    Join Date
    Nov 2012
    Last Online
    Today @ 02:51 PM
    Location
    Southern California
    Posts
    633
    Thanks
    89
    Thanked 128 Times in 103 Posts
    Quote Originally Posted by ChrisR View Post
    Thank you for the replies & link.

    I plan to get a independent lift for the mower deck, a hydraulic dump trailer & a hydraulic top link.
    My first thoughts were to add just one SCV on the rear, but after seeing the slides in the link, I am thinking the cost would not be a lot more to add 2 or 3.

    Brian, am I correct in thinking that the rear valve is dead when the backhoe is on?
    Depends, Several times I have provided a separate valve just for the back hoe. So the PB is always connected to the SCV valve body, everything always works. It all depends on just what you want to do. Some people need-want motor spools, others want a std valve with detent, others want all valves to have the float function. It all comes down to your needs and just what it is that you plan on doing, now and in the future.

    I know that just a few months ago, a guy with a 2000 series had gone with 4 valves, a short time later he added a 5th valve. Sometimes it's hard to know just what all you will end up needing.
    Brian

    Manufacturer of Fit Rite Hydraulics

  8. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •