3 point lever adjustment issue/noise
Results 1 to 3 of 3
Like Tree7Likes
  • 5 Post By jgayman
  • 2 Post By afulton25

Thread: 3 point lever adjustment issue/noise

  1. Top | #1

    Join Date
    Aug 2015
    Last Online
    09-09-2019 @ 12:10 PM
    Location
    Indiana
    Posts
    31
    Thanks
    28
    Thanked 1 Time in 1 Post

    3 point lever adjustment issue/noise

    I know I've seen this discussed on here somewhere, but I can't seem to find the particular thread. Ever since I've had my 1025r (I have about 50 hours on it), when I raise the 3 point lever all the way, there is a pressure noise, as if it's still "working". If I remember correctly, something is out of adjustment. To get the noise to stop, all I have to do is move the lever forward about 1/2 inch. I'm getting ready to do the 50 hour service and thought I'd fix this issue then. If someone knows what needs adjusted or could point me to another thread, I'd greatly appreciate it. Thanks in advance.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 08:58 PM
    Location
    Central Pennsylvania
    Posts
    10,034
    Thanks
    371
    Thanked 1,660 Times in 1,257 Posts
    It sounds like the feedback rod is out of adjustment. There is a mechanism that sense when the 3PH is all the way up so it can then stop/divert the flow of fluid to the 3PH lift cylinder. When this gets out of adjustment the 3PH will continue to lift past the max up position which causes the hydraulics to go into relief.

    On my brothers old Ford 1210 the adjustment was a threaded rod under the seat.

    I found a YouTube video which describes how to adjust the feedback rod.

    https://www.youtube.com/watch?v=4a6JfO4LaP4
    Last edited by jgayman; 12-15-2017 at 09:08 AM.
    dieselshadow, Levi, keane and 2 others like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. The Following 2 Users Say Thank You to jgayman For This Useful Post:

    afulton25†(12-15-2017), keane†(12-15-2017)

  5. Top | #3

    Join Date
    Aug 2015
    Last Online
    09-09-2019 @ 12:10 PM
    Location
    Indiana
    Posts
    31
    Thanks
    28
    Thanked 1 Time in 1 Post
    Iíll give it a try. Thanks for your help.


    Sent from my iPhone using Tapatalk
    Levi and Herminator like this.

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts