JD Hydraulic Dump MCS Operation Question
Results 1 to 7 of 7
Like Tree8Likes
  • 5 Post By Kennyd
  • 3 Post By felixm22

Thread: JD Hydraulic Dump MCS Operation Question

  1. Top | #1

    Join Date
    Mar 2013
    Last Online
    08-18-2019 @ 06:54 AM
    Location
    CT
    Posts
    768
    Thanks
    222
    Thanked 58 Times in 47 Posts

    JD Hydraulic Dump MCS Operation Question

    When connecting and operating an implement such as a hydraulic dump MCS, would something like this work with the power beyond connection and how would you operate the dump function? Is a rear SCV needed to operate the hydraulic dump function?
    John Deere 1026R (MY 2012) Purchased April 2013
    H120 FEL with 49" bucket, Ken's 5/16" Bolt on Hooks & BXpanded Piranha Tooth Bar
    60D (7-iron) Autoconnect MMM
    JD 3-Bag MCS w/Honda GC160 Power "Pak"
    260 BH with 12" bucket
    Artillian 42"x3" Forks w/2" Receiver
    48" EA XTreme Duty Box Blade
    36" EA Independent Wheel Lawn Aerator w/Alternating Depth Tines
    52" Ratchet Rake
    iMatch QH

    2003 John Deere LX266
    42" Freedom Mulching Deck
    Larger LX model wheels/tires

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Mar 2013
    Last Online
    08-18-2019 @ 06:54 AM
    Location
    CT
    Posts
    768
    Thanks
    222
    Thanked 58 Times in 47 Posts
    As I think this through, I suppose a rear SCV like one of Brian's valves would work or just hookup to the loader manifold, correct?
    John Deere 1026R (MY 2012) Purchased April 2013
    H120 FEL with 49" bucket, Ken's 5/16" Bolt on Hooks & BXpanded Piranha Tooth Bar
    60D (7-iron) Autoconnect MMM
    JD 3-Bag MCS w/Honda GC160 Power "Pak"
    260 BH with 12" bucket
    Artillian 42"x3" Forks w/2" Receiver
    48" EA XTreme Duty Box Blade
    36" EA Independent Wheel Lawn Aerator w/Alternating Depth Tines
    52" Ratchet Rake
    iMatch QH

    2003 John Deere LX266
    42" Freedom Mulching Deck
    Larger LX model wheels/tires

  4. Top | #3
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 05:31 PM
    Location
    Westminster, MD
    Posts
    16,215
    Thanks
    4,982
    Thanked 4,025 Times in 2,507 Posts
    You need a SCV/Valve. The PB lines have a constant flow of oil through them whenever the tractor is running, so there is no way control it.

    Are you familiar with electric/electronics? If so then think of the PB like the bus or grid that's always hot, you tap into that with a switch to control and direct the flow of electrons to the device your trying to operate.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  5. The Following 2 Users Say Thank You to Kennyd For This Useful Post:

    fuelhog2000 (10-11-2014), Green Man (10-10-2014)

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4

    Join Date
    Mar 2013
    Last Online
    08-18-2019 @ 06:54 AM
    Location
    CT
    Posts
    768
    Thanks
    222
    Thanked 58 Times in 47 Posts
    Quote Originally Posted by Kennyd View Post
    You need a SCV/Valve. The PB lines has a constant flow of oil through them whenever the tractor is running, so there is no way control or.

    Are you familiar with electric/electronics? If so then think of the PB like the bus or grid that's always hot, you tap into that with a switch to control and direct the flow of electrons to the device your trying to operate.
    Okay, exactly what I was thinking. I didn't see an SCV on the hydraulic dump MCS that I looked at, so was wondering if there is another manner in which the dump function is controlled.

    Yes, very familiar with breakers/panels, etc... The PB is basically the main service line coming into the house and into the panel feeding 240v to the entire panel and an SCV/Valve is an individual single or double pole breaker controlling a particular circuit. Sound about right?

    Does anyone have any feedback on the hydraulic dump MCS with the engine? I'm assuming they will work on a 1-series, it's just a matter of getting a boot to work on the 54/60D deck?
    John Deere 1026R (MY 2012) Purchased April 2013
    H120 FEL with 49" bucket, Ken's 5/16" Bolt on Hooks & BXpanded Piranha Tooth Bar
    60D (7-iron) Autoconnect MMM
    JD 3-Bag MCS w/Honda GC160 Power "Pak"
    260 BH with 12" bucket
    Artillian 42"x3" Forks w/2" Receiver
    48" EA XTreme Duty Box Blade
    36" EA Independent Wheel Lawn Aerator w/Alternating Depth Tines
    52" Ratchet Rake
    iMatch QH

    2003 John Deere LX266
    42" Freedom Mulching Deck
    Larger LX model wheels/tires

  8. Top | #5
    felixm22's Avatar
    Join Date
    May 2013
    Last Online
    07-21-2019 @ 01:57 PM
    Location
    Concord, NH
    Posts
    3,964
    Thanks
    320
    Thanked 453 Times in 340 Posts
    If you have a 1series than you should be able to use the loader ports for the dump unless for some reason you are using the loader while mowing.


    Sent from my iPhone using Tapatalk
    Kennyd, etcallhome and Green Man like this.
    John Deere 318, 50in deck, 54in blade w/ power angle

    Looking for JD Parts check here on JD's official parts website.

    Have no idea where to start with JD Parts check here for a how to.

  9. Top | #6

    Join Date
    Mar 2013
    Last Online
    08-18-2019 @ 06:54 AM
    Location
    CT
    Posts
    768
    Thanks
    222
    Thanked 58 Times in 47 Posts
    What is a good price for one of these with a Honda GC 160 engine... In very good condition?


    Sent from my iPhone using Tapatalk
    John Deere 1026R (MY 2012) Purchased April 2013
    H120 FEL with 49" bucket, Ken's 5/16" Bolt on Hooks & BXpanded Piranha Tooth Bar
    60D (7-iron) Autoconnect MMM
    JD 3-Bag MCS w/Honda GC160 Power "Pak"
    260 BH with 12" bucket
    Artillian 42"x3" Forks w/2" Receiver
    48" EA XTreme Duty Box Blade
    36" EA Independent Wheel Lawn Aerator w/Alternating Depth Tines
    52" Ratchet Rake
    iMatch QH

    2003 John Deere LX266
    42" Freedom Mulching Deck
    Larger LX model wheels/tires

  10. Top | #7

    Join Date
    Mar 2011
    Last Online
    04-13-2016 @ 10:13 PM
    Location
    La Porte Indiana
    Posts
    124
    Thanks
    3
    Thanked 9 Times in 9 Posts
    I'm using one on a 2305. Plugged into my loader ports. Seems to work ok. Mine has the original kawasaki engine on it. I have a lil over a grand in mine, however while searching e bay a few days ago there were 2 on there starting at around $1800 as I recall.

    Keep in mind you will need max front ballast to keep the tractor from doing a good wheelie! lol
    2010 2305
    200cx loader and 62"mmm
    artillian pallet forks
    modified harbor freight quick hitch
    5' rear blade
    47" snowblower and 54" front blade
    custom weight cylinder
    custom 3 pt 2" receiver
    3 pt carryall

  11. The Following User Says Thank You to 4vertical For This Useful Post:

    Green Man (10-14-2014)

  12. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •