Help with 60” deck
Results 1 to 6 of 6
Like Tree17Likes
  • 3 Post By Drifterbike
  • 4 Post By CaseIH574
  • 4 Post By bama1025r
  • 2 Post By Levi
  • 4 Post By JeffW

Thread: Help with 60” deck

  1. Top | #1

    Join Date
    Jan 2018
    Last Online
    01-17-2019 @ 04:24 PM
    Location
    Glasgow, KY
    Posts
    24
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Help with 60” deck

    I turn the selector to the removal position, flip the 4 roller locks to open then lower the deck all the way, but the deck is about 2” off the ground. What could I be doing wrong?

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Drifterbike's Avatar
    Join Date
    Jul 2015
    Last Online
    Yesterday @ 02:56 PM
    Location
    Hampton Ill
    Posts
    2,715
    Thanks
    1,086
    Thanked 317 Times in 278 Posts
    Raise the deck clear up, Turn height selector to the lowest setting, lower mower down, make sure you don't have the 3pt hitch blocked at a certin height. That should do it
    etcallhome, Levi and Robnik like this.
    2018 2038R 220R FEL, 72" Mower, Radial tires, wheel spacers, dual rear SVCs, CtA grapple, single point for FEL, 60" broom with front hitch;2018 1025R 54"auto connect, HDAP tires, Quick Hitch, Ballast Box, Etc...;1967 1020 3cylinder gas, #47 FEL, 72" Landpride Grooming Mower, 6ft box blade, For Sale(no Hurry); life Member NRA since 1974

  4. Top | #3

    Join Date
    Jul 2017
    Last Online
    05-06-2018 @ 11:21 AM
    Location
    Iowa
    Posts
    307
    Thanks
    12
    Thanked 25 Times in 21 Posts
    Lift the deck up, then turn the height of cut control knob to install. Then lower the deck to the ground.
    Levi, keane, Drifterbike and 1 others like this.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Jun 2016
    Last Online
    Yesterday @ 09:51 AM
    Location
    AL
    Posts
    252
    Thanks
    30
    Thanked 26 Times in 24 Posts
    Make sure there is nothing preventing the wheels from going all the way against the housing that they spin on. If they do it should be on the ground. You may also need to make sure your lift lever doesn't have the lock mechanism set somewhere to prevent it from going to the bottom.
    Levi, keane, Drifterbike and 1 others like this.
    Wayne

    2016 1025 R (Mr. Green Genes)
    H-120 53" Front End Loader
    D-60 Mid Mount Mower
    Ken's Bolt on Hooks Combo Deal!!
    i-match quick hitch
    JD ballast box
    Heavy Hitch Receiver
    CMP Dethatcher
    TSC Middle Buster
    King Kutter 48" Rotary Cutter
    4' Tiller Country Way
    Extended Hook and adjustment pins

  7. Top | #5
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Today @ 08:05 AM
    Location
    NE Tenn.
    Posts
    10,154
    Thanks
    2,990
    Thanked 1,899 Times in 1,065 Posts
    After you lower it all the way stand on the 3PH as sometimes with no weight on it, it won't go all the way down.
    keane and Robnik like this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1½" rear wheel spacers.
    NRA Life Member

  8. Top | #6

    Join Date
    Jun 2016
    Last Online
    Today @ 12:24 AM
    Location
    Uniontown, Pa
    Posts
    249
    Thanks
    0
    Thanked 39 Times in 31 Posts
    Check the cam under the height knob, you can see it by looking past the left rear tire. The rock shaft arm should slide up through the open slot on the step cam. if it doesn't try turning your knob until it does, your knob may not be lined up. so your knob says its on install, but the cam gear is at the 2 inch position. Other possibilities, if you have an implement on your 3 pt arms like a tiller, your deck may not go all the way down. If you have a BH on, your power beyond line may be getting caught under the rear arms.
    Levi, keane, Robnik and 1 others like this.

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •