power flow for 60d deck
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
Like Tree1Likes

Thread: power flow for 60d deck

  1. Top | #1

    Join Date
    Oct 2011
    Last Online
    05-21-2019 @ 08:32 AM
    Location
    sw minnesota
    Posts
    59
    Thanks
    0
    Thanked 2 Times in 2 Posts

    power flow for 60d deck

    Does anybody have pictures of baffle plate that goes under deck that attaches power flow unit to deck? I bought a used power flow unit that came off a 60d deck off craigslist. I bought a new 1025r with 60d deck and my dealer is mounting powerflow and bagger system for me. I am bringing operators manual to dealer tomorrow as they are having issues with how baffle plate mounts. If anyone had pictures that would be helpful. They are also making me a bracket to mount bagger system to 3 point hitch so will post pictures when they have it done.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Jun 2014
    Last Online
    07-31-2018 @ 05:51 PM
    Location
    Princeton, Minn
    Posts
    104
    Thanks
    39
    Thanked 4 Times in 4 Posts
    I could be wrong. It's been my understanding the powerflow system fits the 54 inch deck, but not the 60d. I know my 60d deck does not have the fitting on right side for the rod which supports the powerflow head on right side of deck. Good luck with your project. Dan
    John Deere 1023 E, 60d mower, H120 loader,
    Frontier 2060L Back Blade, Heavy Hitch with 320 lb weights,
    Artillian forks with Adaptor for JD Snow Plow. JD 54 inch blade.

  4. Top | #3
    SulleyBear's Avatar
    Join Date
    Oct 2014
    Last Online
    Today @ 07:58 AM
    Location
    Beautiful beaches, moderated summer heat and lake effect snows. Right where I want to be.
    Posts
    6,951
    Thanks
    1,396
    Thanked 2,480 Times in 1,390 Posts
    Quote Originally Posted by srtjrt4141 View Post
    They are also making me a bracket to mount bagger system to 3 point hitch so will post pictures when they have it done.
    Something similar to what's available through this company? This may save them some time and save you some money if they are fabricating it from scratch.....

    John Deere Material Collection System for I-Match

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    cheesetrain's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 07:59 PM
    Location
    Beaver Dam, WI
    Posts
    1,897
    Thanks
    84
    Thanked 172 Times in 147 Posts
    Is them making a bracket cheaper than buying the bracket? I believe the bracket is available separately


    Sent from my iPhone using Tapatalk
    1025R w\ block heater and one rear work light
    H120 FEL w 53" bucket, 54" QH blade, 60" MMM w\ autoconnect, mulch kit and independent lift kit
    JD 3 bag MCS with powerflow
    Land Pride RTA1250 tiller and CA1556 core aerator
    Imatch Quick Hitch
    JamisonBryce MCS Imatch adapter
    Heavy Hitch weight bracket & sub soiler combo
    CMP Attachments 60" HD front dethatcher
    Garber 72" 3pt mount drop spreader
    Countyline 3pt PHD with 9" diameter auger

  7. Top | #5
    Registered User tractorslinger's Avatar
    Join Date
    Mar 2013
    Last Online
    09-29-2016 @ 08:29 PM
    Location
    Fort Wayne,Indiana
    Posts
    584
    Thanks
    8
    Thanked 175 Times in 95 Posts
    Be sure the dealer has the correct hitch plate-blv10028.
    Levi likes this.

  8. Top | #6
    cheesetrain's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 07:59 PM
    Location
    Beaver Dam, WI
    Posts
    1,897
    Thanks
    84
    Thanked 172 Times in 147 Posts

    power flow for 60d deck

    Quote Originally Posted by Danbeck View Post
    I could be wrong. It's been my understanding the powerflow system fits the 54 inch deck, but not the 60d. I know my 60d deck does not have the fitting on right side for the rod which supports the powerflow head on right side of deck. Good luck with your project. Dan
    The powerflow does in fact fit the 60" deck. I have one. The fitting for the rod does not come with the deck. It comes as part of the powerflow kit. See part labeled 'F' in picture

    Click image for larger version. 

Name:	ImageUploadedByTapatalk1413340774.242021.jpg 
Views:	38 
Size:	235.1 KB 
ID:	33989

    Part F bolts to the front underside of the deck. Part C bolts to part F and is what holds the Z bracket.

    Here are a couple pictures of the bracket mounted on my 60" deck.

    Click image for larger version. 

Name:	ImageUploadedByTapatalk1413341006.011759.jpg 
Views:	38 
Size:	274.3 KB 
ID:	33990

    Click image for larger version. 

Name:	ImageUploadedByTapatalk1413341057.617833.jpg 
Views:	35 
Size:	138.3 KB 
ID:	33991


    Sent from my iPhone using Tapatalk
    Last edited by cheesetrain; 10-14-2014 at 09:44 PM.
    1025R w\ block heater and one rear work light
    H120 FEL w 53" bucket, 54" QH blade, 60" MMM w\ autoconnect, mulch kit and independent lift kit
    JD 3 bag MCS with powerflow
    Land Pride RTA1250 tiller and CA1556 core aerator
    Imatch Quick Hitch
    JamisonBryce MCS Imatch adapter
    Heavy Hitch weight bracket & sub soiler combo
    CMP Attachments 60" HD front dethatcher
    Garber 72" 3pt mount drop spreader
    Countyline 3pt PHD with 9" diameter auger

  9. Top | #7

    Join Date
    Jun 2014
    Last Online
    07-31-2018 @ 05:51 PM
    Location
    Princeton, Minn
    Posts
    104
    Thanks
    39
    Thanked 4 Times in 4 Posts
    Great, all set then ! Dan
    John Deere 1023 E, 60d mower, H120 loader,
    Frontier 2060L Back Blade, Heavy Hitch with 320 lb weights,
    Artillian forks with Adaptor for JD Snow Plow. JD 54 inch blade.

  10. Top | #8

    Join Date
    Oct 2011
    Last Online
    05-21-2019 @ 08:32 AM
    Location
    sw minnesota
    Posts
    59
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Thanks Cheesetrain!!

    I have that baffle part f, did you install that on your 60d? Did you have to drill holes in deck to mount that baffle part f cause i didnt see where there was any predrilled holes for bolts.. The operators manaul doesnt say anything about drilling any holes for bolts.

  11. Top | #9

    Join Date
    Oct 2011
    Last Online
    05-21-2019 @ 08:32 AM
    Location
    sw minnesota
    Posts
    59
    Thanks
    0
    Thanked 2 Times in 2 Posts
    ok, dealer is telling me now that I have older designed 60d deck and blower, says the peg hole in picture 1 is where the whole is for peg to fit into deck. On the old style 60d deck the hole for the peg to go into is angle piece that attaches boggey wheel to deck. As you can see in the picture if you line up where hole is on new deck with blower it doesn't fit with that baffle plate. Has anybody bought a new 60d deck lately with power flow? Wondering if I need new mounting hardware or if need a new power flow unit?
    Attached Thumbnails Attached Thumbnails 001.JPG   002.JPG  

  12. Top | #10
    cheesetrain's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 07:59 PM
    Location
    Beaver Dam, WI
    Posts
    1,897
    Thanks
    84
    Thanked 172 Times in 147 Posts
    Quote Originally Posted by srtjrt4141 View Post
    Thanks Cheesetrain!!

    I have that baffle part f, did you install that on your 60d? Did you have to drill holes in deck to mount that baffle part f cause i didnt see where there was any predrilled holes for bolts.. The operators manaul doesnt say anything about drilling any holes for bolts.
    No drilling needed. The holes to bolt the bracket on we're already there on the deck . I have the mulch kit on my 60" deck as well and the holes for it were pre drilled as well.


    Sent from my iPhone using Tapatalk
    1025R w\ block heater and one rear work light
    H120 FEL w 53" bucket, 54" QH blade, 60" MMM w\ autoconnect, mulch kit and independent lift kit
    JD 3 bag MCS with powerflow
    Land Pride RTA1250 tiller and CA1556 core aerator
    Imatch Quick Hitch
    JamisonBryce MCS Imatch adapter
    Heavy Hitch weight bracket & sub soiler combo
    CMP Attachments 60" HD front dethatcher
    Garber 72" 3pt mount drop spreader
    Countyline 3pt PHD with 9" diameter auger

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •