2305 transmission
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
Like Tree10Likes

Thread: 2305 transmission

  1. Top | #1

    Join Date
    Dec 2015
    Last Online
    08-24-2019 @ 02:37 PM
    Location
    Sunbury PA
    Posts
    58
    Thanks
    1
    Thanked 0 Times in 0 Posts

    2305 transmission

    Should a 2305 be able to spin tires on loose soil in 4 wheel and low range? I was trying to tow something very heavy up hill in loose soil and the tractor would not move and the engine did not bog and tires did not spin. I am thinking prv might be faulty.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    fdmars's Avatar
    Join Date
    Feb 2011
    Last Online
    Today @ 07:34 PM
    Location
    Mid CT
    Posts
    2,076
    Thanks
    164
    Thanked 213 Times in 155 Posts
    I have done it with mine.....but not sure if both fronts spun
    2009 JD 2305 w/ Femco folding ROPS,Power Beyond Kit, KBOH, 54"MMM, 47" Snowblower, 200CX Loader w/ BB, Powerhorse 12 ton Logsplitter and King Kutter tool carrier and 17P kart
    2009 Cub Cadet/Yanmar ex3200, Land Pride 60” land plane and 60” finish mower, worksaver posthole digger w/ 9” auger, “The thumb” add on grapple, third function valve and KBOH of course

  4. Top | #3
    SulleyBear's Avatar
    Join Date
    Oct 2014
    Last Online
    Today @ 02:54 PM
    Location
    Beautiful beaches, moderated summer heat and lake effect snows. Right where I want to be.
    Posts
    7,155
    Thanks
    1,427
    Thanked 2,549 Times in 1,430 Posts
    Quote Originally Posted by drtumolo View Post
    Should a 2305 be able to spin tires on loose soil in 4 wheel and low range? I was trying to tow something very heavy up hill in loose soil and the tractor would not move and the engine did not bog and tires did not spin. I am thinking prv might be faulty.
    Did you have a very loud hydraulic "WHINE" noise when the tractor wouldn't move and you were pushing the forward direction pedal?

    If not, what happened?

    Have you been able to drive or move it since, if so, is it functioning like it should?

    1025R with Mauser Cab
    (10/2017)/ 120R FEL / RC2048 Mower / All of Ken's Bolt on Products / 60" HD Front Broom / 3 pt 45 Gallon Boom less Sprayer / CA2068 Core Aerator / I-Match / 54" Snow Plow w/ angling Quick Attach / Frontier 3 Pt Sprayer / Pallet Forks / 8 -42# Weights

    John Deere 455 (New in 9/1996) / MC519 Cart /60" MMM /47" Snow Thrower / 7'3" snow plow / Quick Hitch /
    4 -42# Weights / JD#10 Cart

    ExMark Lazer Z w/60" Deck , Billy Goat Blower , Full Stable of Echo Products





  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Dec 2015
    Last Online
    08-24-2019 @ 02:37 PM
    Location
    Sunbury PA
    Posts
    58
    Thanks
    1
    Thanked 0 Times in 0 Posts
    tractor had a very loud hydraulic whine sound but no movement, no tire spin and the engine didn't "bogg" down. This all occurred when moving forward uphill towing a very large industrial chipper. Tractor works fine since but will not tow chipper. This tractor always seemed slow and under powered in forward. Thinking maybe PRV?

  7. Top | #5
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 08:58 PM
    Location
    Central Pennsylvania
    Posts
    10,034
    Thanks
    371
    Thanked 1,660 Times in 1,257 Posts
    Quote Originally Posted by drtumolo View Post
    tractor had a very loud hydraulic whine sound but no movement, no tire spin and the engine didn't "bogg" down. This all occurred when moving forward uphill towing a very large industrial chipper. Tractor works fine since but will not tow chipper. This tractor always seemed slow and under powered in forward. Thinking maybe PRV?
    How far were you depressing the FWD pedal?
    coaltrain likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  8. Top | #6

    Join Date
    Dec 2015
    Last Online
    Today @ 06:36 AM
    Location
    North Carolina
    Posts
    1,278
    Thanks
    72
    Thanked 174 Times in 161 Posts
    If your chipper is like the old commercial one I had then it's 2-3000lbs pretty easy. I would expect a 2305 to just sit there if it was trying to tow it up hill. It's a SCUT they do not put a lot of power into them and hydrostatic eats some of it too. I know with my old 2210 (the generation before the 2305) if I had too much weight I was trying to tow (or if my land scape rake grabbed too much dirt) it would just sit there. I could get the rear tires to spin if I was pushing something, not necessarily towing/pulling something. These tractors sometimes protect us from ourselves....Not sure what you mean by PRV, pressure relief valve? I am sure it is set fairly low if that is what you are referencing.

    If you are concerned about the hydro's performance usually the first step is to change the fluid and filters and then see what happens. The hydros on these things are pretty reliable. It's the drive shaft U joints that like to fail on this model.
    3025e, D160 loader, Artillian Grapple, Forks, Hoe Bucket, Frontier Land Plane, Rotomec PDH300, Redline Systems 54 inch rock bucket, Heavy Hitch
    400 Garden Tractor, 35a Tiller, 54 inch plow, 60 inch deck

  9. Top | #7

    Join Date
    Dec 2015
    Last Online
    08-24-2019 @ 02:37 PM
    Location
    Sunbury PA
    Posts
    58
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Yes, I do mean the pressure relief valve. The chipper does weigh about 3000lbs and I know it is a SCUT but I expected the engine to bogg down or tire spin. It just sat there with a load whine.

  10. Top | #8
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 08:58 PM
    Location
    Central Pennsylvania
    Posts
    10,034
    Thanks
    371
    Thanked 1,660 Times in 1,257 Posts
    Quote Originally Posted by drtumolo View Post
    Yes, I do mean the pressure relief valve. The chipper does weigh about 3000lbs and I know it is a SCUT but I expected the engine to bogg down or tire spin. It just sat there with a load whine.
    Depending on how far down you were pushing the FWD pedal what you experienced could be normal.
    Kennyd and BigJim55 like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  11. Top | #9

    Join Date
    Dec 2015
    Last Online
    08-24-2019 @ 02:37 PM
    Location
    Sunbury PA
    Posts
    58
    Thanks
    1
    Thanked 0 Times in 0 Posts
    I tried with pedal completely down and just pressing slightly both had same results. Does anyone have an online copy of the tech manual for this tractor? I am thinking of testing the hydraulic pressure but dont have a manual and I can not find anything online.

  12. Top | #10
    coaltrain's Avatar
    Join Date
    May 2014
    Last Online
    Today @ 01:57 PM
    Location
    NW Penna
    Posts
    20,124
    Thanks
    1,092
    Thanked 3,100 Times in 2,263 Posts
    Quote Originally Posted by drtumolo View Post
    I tried with pedal completely down and just pressing slightly both had same results. Does anyone have an online copy of the tech manual for this tractor? I am thinking of testing the hydraulic pressure but dont have a manual and I can not find anything online.
    Deere technical manuals are not available for free online - they are copyrighted.

    TM2289 Technical Manual

    And Ken sells a test gauge with fitting -

    http://www.boltonhooks.com/hydraulics.html
    Last edited by coaltrain; 04-17-2018 at 07:30 AM.
    ~Stan~
    It is what it is
    Knowledge is power, ignorance is bliss
    2520 w/200CX w/62D2

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 3 1 2 3 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •