1026R Foot pedal issues
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17
Like Tree15Likes

Thread: 1026R Foot pedal issues

  1. Top | #1

    Join Date
    Oct 2012
    Last Online
    08-30-2019 @ 09:06 PM
    Location
    Third rock
    Posts
    46
    Thanks
    1
    Thanked 3 Times in 1 Post

    1026R Foot pedal issues

    Good morning one and all..

    Ive been having an issue with my foot pedals not returning and feeling sluggish etc. Went underneath and used air compressor to blow out debris and dust from linkages etc. I noticed that there are two bearings with black plastic "supports" on two sides of one linkage. The supports plastic edges are worn away and it leaves a bunch of play in the linkages so I was thinking that may be the issue. Ive put them back into place but they've come out again. Has anyone replaced these? Im trying to find out if its a home job or time to go to the dealer to do it. Thanks in advance.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    Which items on this illustration looked worn?

    Attached Thumbnails Attached Thumbnails 1026_pedals.jpg  
    PJR832 likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. The Following User Says Thank You to jgayman For This Useful Post:

    ColonyPark (09-19-2018)

  5. Top | #3
    Corndog Hater ColonyPark's Avatar
    Join Date
    Aug 2011
    Last Online
    Yesterday @ 06:53 PM
    Location
    WNY
    Posts
    10,702
    Thanks
    3,579
    Thanked 1,142 Times in 973 Posts
    I can't tell you much of anything, other than my 1026R that I took delivery of brand new in Nov. 2011, has never had any issue with the pedals. Good luck and keep us posted
    Marlin, SulleyBear and PJR832 like this.
    Jamie

    2011 JD 1026R - w/60" NON-AutoConnect MMM, FEL w/WR Long Toothbar, 47" Front Mount Snowblower, 54" Front Mount Blade w/ Rubber Edge, 48" KingKutter Tiller & Brush Hog, CountyLine Carry All and CountyLine 60" Rear Blade, Pat's EZ-Change Quick Hitch System
    1990 JD 185 - 46"MMM w/Power Flow Bagger

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    xcopterdoc's Avatar
    Join Date
    Jan 2012
    Last Online
    Yesterday @ 11:47 AM
    Location
    nc
    Posts
    1,673
    Thanks
    212
    Thanked 892 Times in 335 Posts
    Generally, item 14 is the trouble maker.

    Sent from my LGL52VL using Tapatalk
    Gizmo2, Marlin, SulleyBear and 1 others like this.

  8. The Following User Says Thank You to xcopterdoc For This Useful Post:

    Gizmo2 (10-22-2018)

  9. Top | #5
    kylew's Avatar
    Join Date
    Jan 2018
    Last Online
    Today @ 02:54 AM
    Location
    Grass Lk, Michigan
    Posts
    1,244
    Thanks
    214
    Thanked 267 Times in 222 Posts
    Agree with xcopterdoc. From what I've read, #14, the shock causes the problem with foot pedals not returning properly.
    Marlin and SulleyBear like this.
    🌠Back in my day we had 9 planets🌠

    2014 1025R TLB
    60D AutoConnect Mower●H120 Loader●260 Backhoe●BB2048 Box Blade●RB2060L Back Blade●RC2048 Rotary Cutter●JD 60" Quick Hitch Plow Blade●Ken's Bolt-on Hooks●Ken's Diff Pedal●Ken's I-Match Hook●Ken's Backhoe Steps●Titan 42" Forks w/Headache Rack●Titan Ballast Box●Titan Toothbar w/23WTL Tiger Teeth●3" Edge Tamers●BXpanded 6" Bucket, Ripper & Bucket Quick Change●This & That Mods●Other Stuff I Forgot About●

    The Mrs. has 2014 X360

  10. Top | #6
    SulleyBear's Avatar
    Join Date
    Oct 2014
    Last Online
    Yesterday @ 05:06 PM
    Location
    Beautiful beaches, moderated summer heat and lake effect snows. Right where I want to be.
    Posts
    7,146
    Thanks
    1,427
    Thanked 2,545 Times in 1,426 Posts
    There have been other members who have had issues with the "shock absorber" looking item, which Deere calls a shock absorber, which is number 14.

    A couple of members actually had this come disconnected and simply reattaching it was all it took. At least one other member I recall had the item replaced.

    This item, #14, takes all of the slop out of the pedals and makes their return smooth and it gives them a smooth feeling when you push either pedal. It also makes the pedals have the same feeling of resistance, regardless of position of the pedal or regardless of which directional pedal you are pushing.

    If you have an issue with the tractor not stopping promptly like it always had when releasing either or both of the directional pedals, this is usually the culprit for that issue as well............

    If that is what is wrong with your tractor, it is part number LVA22539 and sells for about $56.75......

    Usually, the biggest issue with replacing it is gaining the access to it. Replacing it is very easy once you have access to it. It is held on with a cotter pin on one end and a nut on the other.

    Of course, it's possible for other items in the linkage to have worn, which would likely cause the pedal to seem sloppy and not as responsive as it should be. If your pedals don't come back to their original position when released, it's often this shock absorber.
    kylew likes this.

    1025R with Mauser Cab
    (10/2017)/ 120R FEL / RC2048 Mower / All of Ken's Bolt on Products / 60" HD Front Broom / 3 pt 45 Gallon Boom less Sprayer / CA2068 Core Aerator / I-Match / 54" Snow Plow w/ angling Quick Attach / Frontier 3 Pt Sprayer / Pallet Forks / 8 -42# Weights

    John Deere 455 (New in 9/1996) / MC519 Cart /60" MMM /47" Snow Thrower / 7'3" snow plow / Quick Hitch /
    4 -42# Weights / JD#10 Cart

    ExMark Lazer Z w/60" Deck , Billy Goat Blower , Full Stable of Echo Products





  11. Top | #7
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    Quote Originally Posted by xcopterdoc View Post
    Generally, item 14 is the trouble maker.

    Sent from my LGL52VL using Tapatalk
    Agreed... But the OP mentioned that he saw two bearings with black plastic "supports" that appeared to be worn away.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  12. Top | #8
    xcopterdoc's Avatar
    Join Date
    Jan 2012
    Last Online
    Yesterday @ 11:47 AM
    Location
    nc
    Posts
    1,673
    Thanks
    212
    Thanked 892 Times in 335 Posts
    Quote Originally Posted by jgayman View Post
    Agreed... But the OP mentioned that he saw two bearings with black plastic "supports" that appeared to be worn away.
    Where are those at exactly? Hmmm..I will have to look at a Chinese blue print tomorrow.

    Sent from my LGL52VL using Tapatalk

  13. Top | #9
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    Quote Originally Posted by xcopterdoc View Post
    Where are those at exactly? Hmmm..I will have to look at a Chinese blue print tomorrow.
    I couldn't figure it out myself which is why I posted the parts illustration and asked the OP to point out the part he thought was worn out. I am waiting for his response.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  14. Top | #10

    Join Date
    Oct 2012
    Last Online
    08-30-2019 @ 09:06 PM
    Location
    Third rock
    Posts
    46
    Thanks
    1
    Thanked 3 Times in 1 Post
    Quote Originally Posted by jgayman View Post
    Which items on this illustration looked worn?

    Thank you for the replies. The items are 23 and 1. I believe that 23 is the black plastic piece thats popped out. There are two, one on each side that move around a bunch and both pop out of the support which is the section of metal that has a rounded bottom hole with a straight flat top. Ill try and grab a photo. If it is the shock absorber is there a way of testing it or checking to see if in fact thats the issue?? I may just replace both if they're somewhat easy to get. Thanks again for all your replies.
    Last edited by Lawandorder; 09-20-2018 at 08:42 AM.
    BigJim55 likes this.

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •