Does anyone know where the 1025 hose guide goes?
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
Like Tree15Likes

Thread: Does anyone know where the 1025 hose guide goes?

  1. Top | #1
    GSM
    GSM is offline

    Join Date
    Aug 2018
    Last Online
    09-11-2019 @ 09:39 PM
    Location
    Massachu$etts
    Posts
    104
    Thanks
    17
    Thanked 10 Times in 4 Posts

    Does anyone know where the 1025 hose guide goes?

    I purchased a used 47" blower for my 1025 but didn't get the hose guides so I picked up those parts a few weeks ago. Problem is I can't figure out where the front guide should mount. See picture.

    There are some large bolts that are too big for the guide. There's a large square opening in the frame but that seems unlikely and too far rearward. There's one small star-head bolt up in the front area that might work but I couldn't budge it with the tools I had available so couldn't try it - and I'm not sure it would clear the side panel anyway.

    Thanks in advance for any wisdom.
    Attached Thumbnails Attached Thumbnails 20181008_154545.jpg  
    chex313 and blue87fj60 like this.
    Glenn

    Deere 1025R, w/120R loader & 260B backhoe
    Sabre w/46" blade
    47 blower
    Innovative Tractor Attachments Grapple
    Clamp-on toothbar
    4P cart

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    Why not use the guide that is already mounted on the tractor, left side of the photo?
    blue87fj60 likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  4. Top | #3
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    I found some photos on-line which seem to show where to mount a second hose guide towards the front of the tractor.







    Attached Thumbnails Attached Thumbnails 1025_blower.jpg   1025_blower2.jpg   1025_blower3.jpg   1025_blower4.jpg  
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  5. The Following User Says Thank You to jgayman For This Useful Post:

    GSM (10-08-2018)

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    blue87fj60's Avatar
    Join Date
    Dec 2014
    Last Online
    Today @ 03:43 AM
    Location
    south jersey
    Posts
    2,696
    Thanks
    150
    Thanked 356 Times in 278 Posts
    My JD plow came with one of those hose pig tails as well. Never used it. Maybe different tractors may need them so they include it.
    Joe
    --------------
    1025R FILB, SB1148, BB2048, Ken's Hooks and Hitch, 36" Artillian forks, JD/Artillian 54" Plow and counting...
    HPX615E Gator

  8. Top | #5
    GSM
    GSM is offline

    Join Date
    Aug 2018
    Last Online
    09-11-2019 @ 09:39 PM
    Location
    Massachu$etts
    Posts
    104
    Thanks
    17
    Thanked 10 Times in 4 Posts
    Quote Originally Posted by jgayman View Post
    Why not use the guide that is already mounted on the tractor, left side of the photo?
    There's a second one up front somewhere to keep the hoses from chaffing on the front corner of the tractor.
    Glenn

    Deere 1025R, w/120R loader & 260B backhoe
    Sabre w/46" blade
    47 blower
    Innovative Tractor Attachments Grapple
    Clamp-on toothbar
    4P cart

  9. Top | #6
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    Quote Originally Posted by GSM View Post
    There's a second one up front somewhere to keep the hoses from chaffing on the front corner of the tractor.
    I found another photo with a closer view.

    Attached Thumbnails Attached Thumbnails 1025_blower5.jpg  
    North585, chex313 and GSM like this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  10. The Following User Says Thank You to jgayman For This Useful Post:

    GSM (10-08-2018)

  11. Top | #7
    GSM
    GSM is offline

    Join Date
    Aug 2018
    Last Online
    09-11-2019 @ 09:39 PM
    Location
    Massachu$etts
    Posts
    104
    Thanks
    17
    Thanked 10 Times in 4 Posts
    Quote Originally Posted by jgayman View Post
    I found some photos on-line which seem to show where to mount a second hose guide towards the front of the tractor.







    Helpful - thanks. That looks like the large square hole is used. I have to give some though to how to secure a bolt in there - maybe a couple fender washers to help?

    I hooked up my grapple for the first time today and something is definitely needed there to keep the hoses off the tire and also from the relatively sharp edge at the corner.
    Glenn

    Deere 1025R, w/120R loader & 260B backhoe
    Sabre w/46" blade
    47 blower
    Innovative Tractor Attachments Grapple
    Clamp-on toothbar
    4P cart

  12. Top | #8
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Yesterday @ 11:48 PM
    Location
    Central Pennsylvania
    Posts
    10,016
    Thanks
    371
    Thanked 1,657 Times in 1,256 Posts
    Quote Originally Posted by GSM View Post
    Helpful - thanks. That looks like the large square hole is used. I have to give some though to how to secure a bolt in there - maybe a couple fender washers to help?

    I hooked up my grapple for the first time today and something is definitely needed there to keep the hoses off the tire and also from the relatively sharp edge at the corner.
    Yep, put a washer on both sides of the hole and you'll be all set. If you are worried about abrasion, pick up a short piece of Dura-Wrap from Kenny. I use them on my blower hoses where they pass near the tire and brush guard.

    Ken's Bolt on Grab Hooks

    Scroll to the bottom of the page.
    Last edited by jgayman; 10-08-2018 at 03:41 PM.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  13. Top | #9
    chex313's Avatar
    Join Date
    Dec 2012
    Last Online
    Yesterday @ 07:52 PM
    Location
    SE. PA.
    Posts
    892
    Thanks
    145
    Thanked 95 Times in 82 Posts
    Quote Originally Posted by jgayman View Post
    I found another photo with a closer view.

    It looks like the hoses still touch at the front of the brush guard ...I wonder if it wouldn't be better to mount that front one, or an additional one there?

    That may be a pad or something hidden behind the hoses at that point...
    Last edited by chex313; 10-08-2018 at 03:54 PM.
    Dave's 2012 1026R TLB,54"MMM Auto Attach,Ken's hooks&clevis,Artillian 36' Forks and a KennyPedal WH 520H 48" Snow Blade,48" Deck379 Peterbuilt (3 Million Miles in a big truck)

  14. Top | #10
    GSM
    GSM is offline

    Join Date
    Aug 2018
    Last Online
    09-11-2019 @ 09:39 PM
    Location
    Massachu$etts
    Posts
    104
    Thanks
    17
    Thanked 10 Times in 4 Posts
    Quote Originally Posted by jgayman View Post
    Yep, put a washer on both sides of the hole and you'll be all set. If you are worried about abrasion, pick up a short piece of Dura-Wrap from Kenny. I use them on my blower hoses where they pass near the tire and brush guard.

    Ken's Bolt on Grab Hooks

    Scroll to the bottom of the page.
    Thanks for the tip on the Dura-Wrap. Never even saw that he had that stuff.
    North585 likes this.
    Glenn

    Deere 1025R, w/120R loader & 260B backhoe
    Sabre w/46" blade
    47 blower
    Innovative Tractor Attachments Grapple
    Clamp-on toothbar
    4P cart

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •