Engine to transmission input seal replacement on 1025R
Results 1 to 2 of 2
Like Tree1Likes
  • 1 Post By Carvel Loafer

Thread: Engine to transmission input seal replacement on 1025R

  1. Top | #1

    Join Date
    Nov 2015
    Last Online
    Yesterday @ 07:49 PM
    Location
    Minnesota
    Posts
    35
    Thanks
    1
    Thanked 1 Time in 1 Post

    Engine to transmission input seal replacement on 1025R

    has anyone replaced the input shaft seal on a 1025r the one on the shaft that comes from the engine. how hard is it to replace any help would be appreciated and thanks in advance.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Carvel Loafer's Avatar
    Join Date
    May 2012
    Last Online
    Today @ 07:51 AM
    Location
    Carvel, Alberta
    Posts
    2,876
    Thanks
    330
    Thanked 449 Times in 263 Posts
    I did, check out this old thread.

    https://www.greentractortalk.com/for...eal-1026r.html

    And it is leaking again due to excessive grass wound up on the drive shaft putting pressure on the seal, but this time it is just a drip so it is going to wait until spring now.
    North585 likes this.
    Workin hard at loafing!
    2012 1026R c/w H120 FEL, 42" Frontier Forks, 6T49 CL Tooth Bar, CL7 Weight Bracket

    RC2048 48" Rough Cut Mower, Buhler Y550R 60" Finishing Mower, 60" Frontier RB2060L Back Blade, JD Ballast Box
    Femco Hitch Adapter 2" Receiver, 60" Farm King 3PH Snow Blower, I Match, BB2048L Frontier Box Blade

    6' Kodiak Landscape Rake, Braber Equipment PHD c/w 9" & 12" X 48" Augers, HLA 1000 60" Snow Blade

    1980 317 L&G Tractor c/w 48" Mower and 48" Snow Blower

  4. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •