1025R with 3rd SCV and 3 point hitch
Results 1 to 4 of 4

Thread: 1025R with 3rd SCV and 3 point hitch

  1. Top | #1

    Join Date
    Jun 2016
    Last Online
    10-09-2019 @ 08:18 AM
    Location
    Sterling Heights, Michigan
    Posts
    60
    Thanks
    2
    Thanked 3 Times in 3 Posts

    1025R with 3rd SCV and 3 point hitch

    I have a 3rd SCV on my 1025R and notice this weekend my hydraulic hoses were rubbing on the 3 point hitch. When I have my rear blade connected that I have a hydraulic cylinder for the angling of the blade. I removed the bracket that holds the hydraulic couplers and bent the bracket to angle the hoses away from the 3 point hitch. If you have this option take a look at this when the 3 point is full up.
    Click image for larger version. 

Name:	F6215C52-E9FF-4DAE-94CB-A7F9D2549B0B.jpeg 
Views:	24 
Size:	836.8 KB 
ID:	659152

    Click image for larger version. 

Name:	D2FC480B-A213-43A2-AA20-B89ABDCC6F8A.jpeg 
Views:	19 
Size:	586.8 KB 
ID:	659150

    Click image for larger version. 

Name:	6D92B105-16A7-47B4-ADD6-83A3E1294AC1.jpeg 
Views:	16 
Size:	627.7 KB 
ID:	659154

    Click image for larger version. 

Name:	04FA1EEB-28AA-4E96-8BF8-B943A9D9050C.jpeg 
Views:	16 
Size:	664.5 KB 
ID:	659156

    Click image for larger version. 

Name:	54D2C02A-6C20-4A2D-9E96-B9CA4F1A628B.jpeg 
Views:	17 
Size:	754.1 KB 
ID:	659158

    Click image for larger version. 

Name:	05E9FF30-F905-4AA3-A605-B64F6059C3AA.jpeg 
Views:	15 
Size:	924.9 KB 
ID:	659160
    Last edited by AVESPERM; 11-28-2018 at 03:49 PM.
    John Deere 2016 1025 R with R3 Turf Tires, LED Work Lights, Rear 3rd selective vavle
    60 D mower With Mulch Kit with Independent lift
    H120 Loader with AF 12 Forks
    Rear Ballast Box, Front weights 5 at 42 LBS each
    Quick I-Match with 3pt tractor receiver.
    Land Pride RB 1660 with Hydraulic angle
    Tractor Supply RT4 Tractor Line Rototiller Tarter Equipment.
    54" Quick connect Front Blade, Snow Thrower.



    Replaced 128 and 149 1970's Cub Cadets.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    DaveX730's Avatar
    Join Date
    Dec 2017
    Last Online
    05-07-2019 @ 04:32 PM
    Location
    Bay City, Michigan 48706
    Posts
    136
    Thanks
    0
    Thanked 13 Times in 13 Posts
    Good catch! At least you have the protective wrap on the hoses! Nice job 👍

  4. Top | #3

    Join Date
    Apr 2017
    Last Online
    10-17-2019 @ 09:48 PM
    Location
    CA
    Posts
    186
    Thanks
    0
    Thanked 14 Times in 14 Posts
    Thanks for the heads up. If I ever decide to fabricate a hydraulic cylinder for my rear blade I will keep this potential problem in mind.

    I have the backhoe so I have the "Power Beyond" connection. I've researched in the Hydraulics section but it seems like it may be a bit too hard for me to accomplish. Sure would be nice though!
    1025R TLB
    42" Artillian pallet forks
    6 ft Steel Express snow pusher
    2048L Box blade
    OTC cab
    54" JD snow blower
    RB2072 Rear blade
    Pat's Easy Change 3 pt hooks
    Agri-ease rear quick hitch
    Woodland Mills WC46 wood chipper

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    May 2018
    Last Online
    Today @ 09:31 AM
    Location
    WI
    Posts
    263
    Thanks
    88
    Thanked 32 Times in 30 Posts
    Not to hijack your thread but I too had a 3D function hydraulic problem with the kit I just purchased from Artillian. I have a 2018 1025r with the 120r loader. I was having my dealer install the kit while they were doing some other work. The supplied bracket was a problem and my dealer had to move everything about 1 1/2” and make a new mounting plate. I thought that the Mauser cab might be the problem but there was no mention of a Mauser cab exclusion by Artillian.

    I sent an e-mail to Tom at Artillian to let them know of the issue and told them to contact my dealer if he had any questions. I got a response from Peter that he doesn’t think the Mauser cab is the problem but the loader is. Don’t know about that because I purchased the 1025r kit they had listed. Anyways, Artillian is aware of the issue and I hope they take whatever steps necessary before anyone else purchases the 1025r kit being a Mauser cab or 120r loader issue.

    All finished now and I’m happy with the results. I now have down pressure with the CTA plow and will be all set for a grapple in the future. WooHoo!
    2018 John Deere 1025r, Mauser cab, rear wiper, rear light, FEL, Piranah tooth bar, Heavy Hitch weight bar, 8 suitcase weights, 55 amp alternator, Kens hooks and seat springs, 54” MMM, 66” Loader mounted CTA plow, Artillian 3d function diverter kit. New Green equipment =less green in investments

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •