Pivot pin lock
Results 1 to 3 of 3
Like Tree7Likes
  • 6 Post By Gwizz
  • 1 Post By kylew

Thread: Pivot pin lock

  1. Top | #1

    Join Date
    Sep 2018
    Last Online
    Yesterday @ 05:24 PM
    S.W. Michigan
    Thanked 45 Times in 23 Posts

    Pivot pin lock

    I have a 'Woods' brand 5' rear blade that the pivot bolt keeps backing out on while using the blade …
    I decided to do something about the troublesome bolt by making a 'lock' to keep it from unscrewing.
    I dug through my scrap steel bin and found a piece of heavy gage sheet metal, cut out a piece 3"x 5" , and then carved a octagon opening large to accommodate the pivot bolt, then made a dog leg bend in it, and a hole for a 3/8 bolt to hold it down.
    I drilled and tapped the main beam for the 3/8 bolt and screwed it down to lock the plate in place.
    The pivot bolt isn't going anywhere now …

    Attached Thumbnails Attached Thumbnails DSCF3844.JPG   DSCF3846.JPG   DSCF3852.JPG   DSCF3853.JPG   DSCF3863.JPG  

    Last edited by Gwizz; 02-09-2019 at 04:06 PM.
    Gizmo2, Tomfive, jgayman and 3 others like this.
    2013 - JD 1025r, 60" Auto Connect MMM, H120 FEL, 50" QA Loader Bucket, Home made Bucket Teeth, Titan QA loader fork back frame, Home made 66" Loader QA Snow Plow, Home made Land Plane. Home made loader QA Stump bucket. Home made loader boom pole attachment. Home made Landscape Rake. Modified HF Quick Hitch, Home made 3 point Ballast Box, Home made Debris Forks, Betsco BX42-S Wood Chipper, Woods 60" Back Blade, 72" Befco Finish Mower. 5' Bush Hog Mower. 1952 Ford 8N

  2. Remove Advertisements

  3. Top | #2
    Senior GTT Super Slacker Gizmo2's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 07:23 PM
    New York
    Thanked 3,988 Times in 2,945 Posts
    Really nice job Gwizz.

    JD 2320, 200CX FEL/61" bucket , 46 BH/16" bucket, Artillian Forks, 72" Snow Blade, Landscape Rake, Ballast Box, PHD,
    BX42 Chipper, XUV 560 Gator, Z915B ZTrak

  4. The Following User Says Thank You to Gizmo2 For This Useful Post:

    Gwizz (02-09-2019)

  5. Top | #3
    kylew's Avatar
    Join Date
    Jan 2018
    Last Online
    Yesterday @ 06:43 PM
    Grass Lk, Michigan
    Thanked 267 Times in 222 Posts
    Wow, that looks factory. Like it's suppose to be there. Nice job.
    Gizmo2 likes this.
    🌠Back in my day we had 9 planets🌠

    2014 1025R TLB
    60D AutoConnect Mower●H120 Loader●260 Backhoe●BB2048 Box Blade●RB2060L Back Blade●RC2048 Rotary Cutter●JD 60" Quick Hitch Plow Blade●Ken's Bolt-on Hooks●Ken's Diff Pedal●Ken's I-Match Hook●Ken's Backhoe Steps●Titan 42" Forks w/Headache Rack●Titan Ballast Box●Titan Toothbar w/23WTL Tiger Teeth●3" Edge Tamers●BXpanded 6" Bucket, Ripper & Bucket Quick Change●This & That Mods●Other Stuff I Forgot About●

    The Mrs. has 2014 X360

  6. The Following User Says Thank You to kylew For This Useful Post:

    Gwizz (02-09-2019)

  7. Remove Advertisements

Similar Threads

  1. Lynch pin (aka "quick lock" pin)
    By DeereWimberley in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 12
    Last Post: 06-20-2018, 09:59 AM
  2. 2720 Axle Pivot Pin zerk not taking grease
    By jgayman in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 18
    Last Post: 10-06-2016, 09:10 PM
  3. H120 Loader problem, pivot pin bolt loose but nut is tight.
    By DeereBoots in forum Implements & Attachments
    Replies: 13
    Last Post: 05-03-2016, 03:01 PM
  4. No Grease Fittings on Pivot Pin and Tie Rod?
    By moshiersr in forum Sub Compact Utility Tractors (SCUT)
    Replies: 4
    Last Post: 06-18-2013, 08:16 AM
  5. 5105 front axle pivot pin grease zerks where are they ?
    By BCOWANWHEELS in forum Utility Tractors
    Replies: 2
    Last Post: 05-09-2013, 09:10 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts