Wheel weights & spacers
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 44
Like Tree493Likes

Thread: Wheel weights & spacers

  1. Top | #1
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 10:20 AM
    Location
    NE Tenn.
    Posts
    9,879
    Thanks
    2,817
    Thanked 1,800 Times in 1,013 Posts

    Wheel weights & spacers

    Not sure how to start this so bare with me.
    A week or so ago I get a call from Tractor Time with Tim, also known as Tractor Tim. He informs me of things he got started and got help with. Seems he got ahold of a few vendors and they were all happy to help. The vendors are:
    Tractor Time with Tim and his wife Christy
    Kennyd of Bolt on Hooks
    R2 Manufacturing
    Heavy Hitch
    Artillian
    So to all of them and everyone involved "Thank You!!!!". I have no idea how I can ever repay you for your generosity. This goes above and beyond anything I ever dreamed of. I've been involved in helping others but this...Thank you so much.

    That being said here is what they did. They bought me 72 lb. wheel weights and a set of 1½" wheel spacers. I was going to post pics but it seems I can't do that now for some odd reason I don't know of.

    When I posted pics of the last time I got myself into trouble on my hills I didn't mean for this to happen but I want everyone to know how grateful and thankful I am. I'll have to wait till I get back from the north country to put them on and I will document it with pics...if the pics thing works. I've know that this is the greatest forum on the internet but the people on here are the best and without them it wouldn't be the greatest. All the other forums have a place but this one is by far the greatest!! I don't say that just because I'm receiving this help but because of the help we have all been to other members on here.

    I've helped others but being on the receiving end is new to me. Like WB, I'm humbled.
    I'll get back to this after I get back. Hopefully I'll have my head on right when I do. Thanks again!!!!!!!!!!!

    Looks like the pics did work...
    Attached Thumbnails Attached Thumbnails IMG_1395.JPG   IMG_1398.JPG  
    Last edited by Levi; 04-23-2019 at 08:24 AM.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon
    NRA Life Member

  2. The Following 13 Users Say Thank You to Levi For This Useful Post:

    BigJim55 (05-02-2019), Bill56 (05-07-2019), bmichael (04-23-2019), Herminator (04-23-2019), HVACguy (04-26-2019), KenLit (05-09-2019), Kennyd (04-23-2019), lindsey97 (04-25-2019), OxPath (04-27-2019), PJR832 (04-23-2019), Tractor Tim (04-24-2019), Wj80 (04-23-2019), Yank (04-25-2019)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    rtgt's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:21 AM
    Location
    Kentucky
    Posts
    5,125
    Thanks
    1,494
    Thanked 863 Times in 629 Posts
    Outstanding!

    Way to go guys and girls.
    Kennyd, DRobinson, Levi and 9 others like this.
    Taking the easy way is what makes rivers and men crooked.

    3039R, H160 FEL, 375A Backhoe, Artillian Grapple & Forks
    Z915E
    XUV560

  5. The Following User Says Thank You to rtgt For This Useful Post:

    Levi (04-23-2019)

  6. Top | #3
    PJR832's Avatar
    Join Date
    Apr 2017
    Last Online
    Today @ 03:23 PM
    Location
    Central New York
    Posts
    9,944
    Thanks
    1,641
    Thanked 1,322 Times in 1,084 Posts
    Couldn't have happened to a better man.
    Kennyd, DRobinson, rtgt and 13 others like this.
    Pat
    2025R W/120R FEL/Titan 36" Pallet Forks w/round bale spears/Ken's Bolt on Hooks / 72" moose plow / Kawasaki Mule(The Donkey) 610xc w/ Warn winch
    60D Auto Connect w/mulch kit and Gator G6 blades
    County Line- 48" Tiller & Rotary Cutter, middle buster
    Frontier- BB5048L & DH1066 & RC2060
    JD iMATCH
    Homemade cultivator/hiller/chisel plow
    Heavy Hitch Tooth Bar
    Watch the 2025R on YouTube:
    Elk Creek Acres

  7. The Following 2 Users Say Thank You to PJR832 For This Useful Post:

    Levi (04-23-2019), rtgt (04-23-2019)

  8. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  9. Top | #4
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 08:02 AM
    Location
    Joelton TN
    Posts
    19,205
    Thanks
    1,041
    Thanked 4,064 Times in 2,475 Posts
    I want to see installed pics!
    Kennyd, DRobinson, rtgt and 9 others like this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

  10. Top | #5
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 10:20 AM
    Location
    NE Tenn.
    Posts
    9,879
    Thanks
    2,817
    Thanked 1,800 Times in 1,013 Posts
    Just to add a tidbit of info. The pic of the weights...you can see a yellow line going all the way to the front of the bed where the left weight is. On my way home from picking them up I made it the whole 10 miles without any mishap till I got within ½ mile of home. On our narrow road a dually pickup couldn't slow down fast enough so I got on my brakes a little more then normal and that weight slid all the way to the front and pushed the front to where it started to come apart at the seam where the front and the floor come together. No good deed goes unpunished.
    Kennyd, rtgt, OxPath and 7 others like this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon
    NRA Life Member

  11. Top | #6
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 10:20 AM
    Location
    NE Tenn.
    Posts
    9,879
    Thanks
    2,817
    Thanked 1,800 Times in 1,013 Posts
    Quote Originally Posted by dieselshadow View Post
    I want to see installed pics!
    And you will...as soon as I get back.
    DRobinson, rtgt, OxPath and 9 others like this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon
    NRA Life Member

  12. Top | #7
    rtgt's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 08:21 AM
    Location
    Kentucky
    Posts
    5,125
    Thanks
    1,494
    Thanked 863 Times in 629 Posts
    Quote Originally Posted by Levi View Post
    Just to add a tidbit of info. The pic of the weights...you can see a yellow line going all the way to the front of the bed where the left weight is. On my way home from picking them up I made it the whole 10 miles without any mishap till I got within ½ mile of home. On our narrow road a dually pickup couldn't slow down fast enough so I got on my brakes a little more then normal and that weight slid all the way to the front and pushed the front to where it started to come apart at the seam where the front and the floor come together. No good deed goes unpunished.


    I have a couple dents in the front of the Tundra bed just like that. A rubber mat has its limits I guess.

    I now keep a couple pieces of that non-skid tool box liner stuff in the truck for that reason. So far, it has worked ok.
    DRobinson, Levi, OxPath and 7 others like this.
    Taking the easy way is what makes rivers and men crooked.

    3039R, H160 FEL, 375A Backhoe, Artillian Grapple & Forks
    Z915E
    XUV560

  13. Top | #8
    Spectre's Avatar
    Join Date
    Jan 2019
    Last Online
    Today @ 02:15 PM
    Location
    MO
    Posts
    502
    Thanks
    52
    Thanked 88 Times in 67 Posts
    Quote Originally Posted by Levi View Post
    Not sure how to start this so bare with me.
    A week or so ago I get a call from Tractor Time with Tim, also known as Tractor Tim. He informs me of things he got started and got help with. Seems he got ahold of a few vendors and they were all happy to help. The vendors are:
    Tractor Time with Tim and his wife Christy
    Kennyd of Bolt on Hooks
    R2 Manufacturing
    Heavy Hitch
    Artillian

    So to all of them and everyone involved "Thank You!!!!". I have no idea how I can ever repay you for your generosity. This goes above and beyond anything I ever dreamed of. I've been involved in helping others but this...Thank you so much.

    That being said here is what they did. They bought me 72 lb. wheel weights and a set of 1½" wheel spacers. I was going to post pics but it seems I can't do that now for some odd reason I don't know of. Looks like the pics did work...
    Rock On Vendors & Friends................
    DRobinson, rtgt, Levi and 11 others like this.
    Chris


    2019 4052R/Cab, iMatch QH, 440R Loader w/BW16358 Bucket(Got Loops) , Frontier RB5072 Blade, Frontier LP1184 Land Plane, Front moveable fenders, Rear fender extensions, Dual Exterior mirrors,Ballast Box BW15073, Dual rear work lights(LVB24853), JD Hammerstrap, R2 4" Edge Tamers, (coming soon: Weather radar,FLIR,HUD, Chocolate bar & "Manpon" dispensers)

  14. The Following 2 Users Say Thank You to Spectre For This Useful Post:

    Kennyd (04-23-2019), Tractor Tim (04-24-2019)

  15. Top | #9

    Join Date
    Dec 2013
    Last Online
    Today @ 03:32 PM
    Location
    Southwest Ohio
    Posts
    3,016
    Thanks
    865
    Thanked 700 Times in 508 Posts
    Quote Originally Posted by PJR832 View Post
    Couldn't have happened to a better man.
    x2!!!

    Quote Originally Posted by Levi View Post
    And you will...as soon as I get back.
    Safe travels, Levi!
    Kennyd, DRobinson, rtgt and 10 others like this.
    '05 JD 3520 Open Station w/ 300CX FEL
    Grandpa's '52 Farmall Cub
    A couple of old Gravelys
    Help a Vet and his dog

  16. The Following User Says Thank You to mark02tj For This Useful Post:

    Levi (04-23-2019)

  17. Top | #10

    Join Date
    Jun 2017
    Last Online
    Today @ 03:05 PM
    Location
    SWVA
    Posts
    221
    Thanks
    37
    Thanked 22 Times in 13 Posts
    IN! For the spacer adventure. Are shenanigans involved with bolt shoulders and driving around for different thread pitches?

    If this is a "all inclusive" kit I'm so gonna buy it.
    Levi, OxPath, BigJim55 and 4 others like this.

  18. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 5 1 2 3 ... LastLast

Similar Threads

  1. Wheel & Suitcase Weights?
    By FrankR in forum Sub Compact Utility Tractors (SCUT)
    Replies: 44
    Last Post: 09-23-2017, 02:10 AM
  2. Weel weights vs spacers
    By bauman686 in forum Large Frame Compact Utility Tractors (LCUT)
    Replies: 4
    Last Post: 06-05-2017, 08:05 PM
  3. Weel weights vs spacers
    By bauman686 in forum Forum Help & Suggestions
    Replies: 0
    Last Post: 06-02-2017, 10:00 AM
  4. JD wheel weights for 5&6 series tractors
    By Ibboatin28 in forum For Sale
    Replies: 1
    Last Post: 05-06-2017, 03:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •