1023e Measured Weight with different implements
Results 1 to 3 of 3
Like Tree21Likes
  • 13 Post By BWV
  • 7 Post By BWV
  • 1 Post By BWV

Thread: 1023e Measured Weight with different implements

  1. Top | #1
    BWV
    BWV is offline
    BWV's Avatar
    Join Date
    Jun 2019
    Last Online
    Yesterday @ 08:37 PM
    Location
    Stamford, NY, USA
    Posts
    136
    Thanks
    31
    Thanked 28 Times in 20 Posts

    1023e Measured Weight with different implements

    Well.. A buddy of mine borrowed a set of race car scales from a friend of his to weigh his race car.
    That friend dropped the control box as he was packing them up for my buddy.
    Knowing I am a little bit of an electronics guy, my buddy asked me to fix em...

    A broken display and one 8Mhz Crystal later... and I found myself looking at a working set of 4 very accurate scales, in the same room as my 1023e.

    So... I got out all of my toys, and measured quite a few possible configurations of this tractor and implements.

    It is my hope that this helps anyone reading this to understand the importance of proper ballasting, as well as to see the effects implements have on the balance of the tractor.

    There might be imperfections in the numbers... I was going for "real world" figures, not mathematical perfection I was just shooting to provide some info.
    Corrections ideas, and thoughts are welcome.

    I haven't really analyzed things yet.. but I was surprised at how things hangin' off the front or back affect things in the middle.

    Measured weight using 4 "Race Car" scales.. I left out the corner weights, just did front/rear
    (Full tank of fuel... left side is 31lb heavier than right)
    (May not be perfect... but I'd say +/- 2lb each corner)
    The "Base tractor" includes with 20gal RimGaurd(220lb), Deck lift, Frt Brush Guard, Loader mounts(185lbs)..I wasnt removing that stuff


    Front Lbs Rear Lbs Total Weight Deck Loader BushHog Rake RR Blade Wheel Wt Me SnowBlower Frt Blade Note Added Weight Front % Rear %
    706 1159 1865 - - - - - - - - - rops down 0 37.9% 62.1%
    697 1168 1865 - - - - - - - - - rops back 0 37.4% 62.6%
    715 1150 1865 - - - - - - - - - rops normal 0 38.3% 61.7%
    715 1248 1963 x 98 36.4% 63.6%
    743 1352 2095 x 230 35.5% 64.5%
    743 1450 2193 x x 328 33.9% 66.1%
    598 1409 2007 x 142 29.8% 70.2%
    521 1537 2058 x 193 25.3% 74.7%
    327 1941 2268 x 403 14.4% 85.6%
    817 1245 2062 x 197 39.6% 60.4%
    699 1504 2203 x x 338 31.7% 68.3%
    624 1633 2257 x x 392 27.6% 72.4%
    1261 1105 2366 x x 501 53.3% 46.7%
    866 1906 2772 x x x 907 31.2% 68.8%
    1142 1364 2506 x x x 641 45.6% 54.4%
    1064 1492 2556 x x x 691 41.6% 58.4%
    1126 1040 2166 x 301 52.0% 48.0%
    1236 997 2233 x 1 sand bag 67lb 368 55.4% 44.6%
    1330 960 2290 x 2 bags 67lb,57lb 425 58.1% 41.9%
    1424 922 2346 x 3 bags 67lb,57lb,56lb 481 60.7% 39.3%
    1818 762 2580 x Me + 3 sandbags 715 70.5% 29.5%
    755 1817 2572 x x 707 29.4% 70.6%
    865 1774 2639 x x 1 sand bag 67lb 774 32.8% 67.2%
    959 1737 2696 x x 2 bags 67lb,57lb 831 35.6% 64.4%
    1051 1701 2752 x x 3 bags 67lb,57lb,56lb 887 38.2% 61.8%
    1335 894 2229 x 364 59.9% 40.1%
    1219 1152 2371 x x 506 51.4% 48.6%
    1007 1038 2045 x 180 49.2% 50.8%
    889 1298 2187 x x 322 40.6% 59.4%
    "No problem can be solved by the same kind of thinking that created it." Albert Einstein

    '19 1023e
    R3 turf tires
    54" AutoConnect Deck
    54" SnowBlower Electric chute
    60" $152 DIY Push Blade
    RimGuard loaded rears + 50lb plastic weights
    LandPride RB0560 60" Back Blade
    72" DIY rake w/guide wheels (uses RB0560 frame)
    48" Taylor Pittsburgh 233 series Rotary Cutter
    LED Headlights, Work lights and 3pt area lighting
    D120 Loader with DIY Toothbar
    Cyclone Rake Classic w/Duals and Power Vacuum

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    BWV
    BWV is offline
    BWV's Avatar
    Join Date
    Jun 2019
    Last Online
    Yesterday @ 08:37 PM
    Location
    Stamford, NY, USA
    Posts
    136
    Thanks
    31
    Thanked 28 Times in 20 Posts
    Implement Weight Effect on Base tractor

    Again... "Base tractor" includes with 20gal RimGuard(220lb), Deck lift, Frt Brush Guard, Loader mounts(185lbs)

    Added/Removed @ Front Added/Removed @ Rear Total Added note
    0 98 98 wheel weights
    alone
    28 202 230 me
    28 300 328 wheel weights+me
    -108 250 142 RR blade alone
    -185 378 193 rake alone
    111 86 197 deck alone
    -7 345 338 deck, RR blade
    -82 474 392 deck, rake
    555 -54 501 deck, loader
    160 747 907 deck, loader,
    hog
    436 205 641 deck, loader, RR
    blade
    358 333 691 deck, loader, rake
    629 -265 364 blower (and Quick Attach)
    513 -7 506 blower, RR blade
    301 -121 180 FR blade(and Quick Attach)
    183 139 322 FR blade, RR blade
    -388 791 403 Rotary Cutter Alone
    411 -110 301 Loader Alone
    521 -153 368 with 1 67lb sandbag
    615 -190 425 with 2 (67,57) sandbags
    709 -228 481 with 3 (67,57,56) sandbags
    1103 -388 715 with Me + 3 (235,67,57,56) sandbags
    40 667 707 Loader and Rotary Cutter
    150 624 774 with 1 67lb sandbag
    244 587 831 with 2 (67,57) sandbags
    336 551 887 with 3 (67,57,56) sandbags
    Last edited by BWV; 09-24-2019 at 05:37 AM.
    chex313, OxPath, jdforever and 4 others like this.
    "No problem can be solved by the same kind of thinking that created it." Albert Einstein

    '19 1023e
    R3 turf tires
    54" AutoConnect Deck
    54" SnowBlower Electric chute
    60" $152 DIY Push Blade
    RimGuard loaded rears + 50lb plastic weights
    LandPride RB0560 60" Back Blade
    72" DIY rake w/guide wheels (uses RB0560 frame)
    48" Taylor Pittsburgh 233 series Rotary Cutter
    LED Headlights, Work lights and 3pt area lighting
    D120 Loader with DIY Toothbar
    Cyclone Rake Classic w/Duals and Power Vacuum

  4. Top | #3
    BWV
    BWV is offline
    BWV's Avatar
    Join Date
    Jun 2019
    Last Online
    Yesterday @ 08:37 PM
    Location
    Stamford, NY, USA
    Posts
    136
    Thanks
    31
    Thanked 28 Times in 20 Posts
    While we are talking weight... some other specs that might help those researching...

    Approximate shipping weight of a 1023e is 1345 lb (Deere Spec)

    Fuel tank capacity 5.6 U.S. gal x 7.1lb/gal = 39.86 lbs full tank

    Rear Tires... 10 Gallons of liquid leaves it so you can still check tire pressure with stem on top... Rim guard is 11lb/gal .. 220lb for both rears

    Axle Capacities
    Front 1349 lb
    Rear 1576 lb

    3-point hitch Lift capacity, 24-in. behind link arms 681 lb

    D120 Loader lift capacity
    Measured at full height: at pivot = 825 lb, at 19.7" ahead of pivot = 570 lb
    Boom breakout force: at pivot =1808 lb, at 19.7 ahead of pivot =1238 lb
    Bucket rollback force: at full height = 1330lb, at ground-level line = 1559 lb

    The weights in the above tables are for the below equipment
    1865lbs (weighed) 2019 1023e with loaded rear tires, full tank of fuel, loader masts and brush guard installed.
    197lbs (weighed) 54" AutoConnect Deck
    364lbs (weighed) 54" Deere SnowBlower w/ Electric chute (Includes weight of Quick hitch with angle cylinder)
    180lbs (weighed) 60" DIY Push Blade (Modified Warn ATV blade includes QH with angle cylinder as above)
    220lbs (weighed) RimGuard loaded rears
    98lb (weighed) 2X Deere "50lb" plastic wheel weights
    142lbs (weighed) LandPride RB0560 60" Back Blade
    193lbs (weighed) 72" DIY rake w/guide wheels (uses RB0560 frame, included in weight)
    403lbs (weighed) 48" Taylor Pittsburgh 233 series Sub Compact version Rotary Cutter
    301lbs (weighed) D120 Loader with Pin on Bucket (for Bucket, Boom, hydraulics, and hoses.. no mount)
    120lbs (advertised shipping weight) Loader Mounts and Masts
    16lbs (advertised shipping weight) Economy Grill Guard (Comes with D120 Loader)

    (Deere spec says "base weight" is 486lb for D120 Loader...and maybe the pallet it ships on?)
    chex313 likes this.
    "No problem can be solved by the same kind of thinking that created it." Albert Einstein

    '19 1023e
    R3 turf tires
    54" AutoConnect Deck
    54" SnowBlower Electric chute
    60" $152 DIY Push Blade
    RimGuard loaded rears + 50lb plastic weights
    LandPride RB0560 60" Back Blade
    72" DIY rake w/guide wheels (uses RB0560 frame)
    48" Taylor Pittsburgh 233 series Rotary Cutter
    LED Headlights, Work lights and 3pt area lighting
    D120 Loader with DIY Toothbar
    Cyclone Rake Classic w/Duals and Power Vacuum

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts