2210 shutter on power off
Results 1 to 7 of 7

Thread: 2210 shutter on power off

  1. Top | #1

    Join Date
    Sep 2011
    Last Online
    07-04-2014 @ 09:10 PM
    Location
    Pgh, Pa
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts

    2210 shutter on power off

    First post gentlemen, been lurking for a little while, I did search for any related posts but nothing matched my question.

    I've got a new to me 2004 deere 2210 with FEL, 254 hours.

    Small blast of diesel smoke when I start it at idle (even preheating the glow plugs).

    Runs just fine.

    The question I have: When I shut it off at idle, the engine give a shutter or two. Not excessive idling or anything, just a shutter/shake for a second or two.

    My neighbor has a 2305 which does not do this.

    Not sure what it could be, any ideas?

    Thanks!

    Mike

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 08:11 PM
    Location
    Westminster, MD
    Posts
    16,392
    Thanks
    5,043
    Thanked 4,074 Times in 2,540 Posts
    Welcome to DT! It all sounds pretty normal to me, a lot of small diesel engines do this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. Top | #3
    RandyM's Avatar
    Join Date
    Sep 2010
    Last Online
    03-14-2017 @ 10:30 AM
    Location
    Stoughton, Wisconsin
    Posts
    6,594
    Thanks
    1,047
    Thanked 1,061 Times in 672 Posts
    :welcomedt Mike

    I agree with Kenny, normal. My 2305 likes its shut off dance too. I would say your neighbor is the lucky one.
    Randy __________________________________________________ ___ Be Safe!

    2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
    Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
    60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
    Everything Attachments ETA-PluggerV2-60 Aerator

    The more I learn, the less I know.

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Sep 2011
    Last Online
    07-04-2014 @ 09:10 PM
    Location
    Pgh, Pa
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Thanks for the reply

    I was just wondering if the 2210 motor is hard mounted or had bushings?
    Shutter looks like it could be rubber mounted.

    Thanks, Mike

  7. Top | #5
    megotadeere's Avatar
    Join Date
    Oct 2010
    Last Online
    03-08-2015 @ 05:40 PM
    Location
    New Richland, Minnesota
    Posts
    65
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Always a little puff of something when I start my 2210, how much smoke and what color depend on the throttle setting, temperature, etc.
    I also get the "shut down shuffle" in varying degrees, depending on throttle. Really rattles the bucket when the loader's on, sometimes.
    How long you pre-glow the glow plugs can cut down on the smoke, if it's cool out I sometimes glow for up to 5 seconds minimizes smoke.

    You might try some Cetane Booster in your fuel, will cut down on the black smoke under heavy load, but not eliminate it.

  8. Top | #6

    Join Date
    Jun 2011
    Last Online
    08-20-2015 @ 12:26 PM
    Location
    Georgia
    Posts
    84
    Thanks
    5
    Thanked 16 Times in 9 Posts
    [QUOTE=Mike_1969_cb450;16971]I was just wondering if the 2210 motor is hard mounted or had bushings?
    Shutter looks like it could be rubber mounted.

    The 2210 engine is mounted on 4 rubber bushings.

    GotDeeres
    [

  9. Top | #7

    Join Date
    Jun 2011
    Last Online
    08-20-2015 @ 12:26 PM
    Location
    Georgia
    Posts
    84
    Thanks
    5
    Thanked 16 Times in 9 Posts
    Mike,

    I had the side panels off my 2210 and noticed a metal strap over the front two rubber engine mounts. I checked JD parts and found that the strap, LVU-800712 stop, was provided on serial number 216249 and higher. This appears to me that it would reduce the shuttering during shutdown. Apparently it was added for some reason? I would consider adding the stops if your tractor does not have them.

    GotDeeres
    [

  10. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Similar Threads

  1. Curtis blade on 2210
    By Fred Gross in forum Sub Compact Utility Tractors (SCUT)
    Replies: 7
    Last Post: 01-03-2012, 03:50 AM
  2. How do I remove the steering wheel on my 2210?
    By furnone in forum Sub Compact Utility Tractors (SCUT)
    Replies: 9
    Last Post: 09-19-2011, 07:50 PM
  3. 2520 vs 2210, my first impressions
    By tackleberry1145 in forum Medium Frame Compact Utility Tractors (MCUT)
    Replies: 18
    Last Post: 08-23-2011, 11:41 AM
  4. 2210 hydro pedals sticking...
    By megotadeere in forum Sub Compact Utility Tractors (SCUT)
    Replies: 9
    Last Post: 05-17-2011, 06:15 AM
  5. 2210 No pwr to blades
    By martinsmt in forum Sub Compact Utility Tractors (SCUT)
    Replies: 10
    Last Post: 05-12-2011, 04:55 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •