2305 coolin fan
Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By etcallhome

Thread: 2305 coolin fan

  1. Top | #1

    Join Date
    Aug 2016
    Last Online
    10-29-2017 @ 10:36 PM
    Location
    fairhaven, mass
    Posts
    26
    Thanks
    11
    Thanked 1 Time in 1 Post

    2305 coolin fan

    how long can i go with m=blade s broke, i don't feel that munch heat

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Nov 2014
    Last Online
    11-10-2018 @ 06:59 PM
    Location
    Massachusetts
    Posts
    70
    Thanks
    0
    Thanked 12 Times in 8 Posts
    Not long.

    Are you asking how long you can go until critical failure? Or how long you can go before you should get it repaired?

    Either way, not long. Heat is the #2 killer of mechanical components, only 2nd to lubrication.

    Get it fixed and don't run it, it's not an expensive part compared to the value of the machine you're gambling with.
    2013 1025R
    H120 / 260BH
    54 Snowblower
    Artillian 42" Forks
    Imatch
    PSRumors Springs
    Kens Bolt On Hooks

  4. Top | #3

    Join Date
    Aug 2016
    Last Online
    10-29-2017 @ 10:36 PM
    Location
    fairhaven, mass
    Posts
    26
    Thanks
    11
    Thanked 1 Time in 1 Post

    2305 trans axle cooling fan

    have no blades left. how long and important to get fixed,

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 08:15 PM
    Location
    Westminster, MD
    Posts
    16,400
    Thanks
    5,043
    Thanked 4,079 Times in 2,545 Posts
    Quote Originally Posted by captz88 View Post
    have no blades left. how long and important to get fixed,
    Soon. Very.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  7. Top | #5
    etcallhome's Avatar
    Join Date
    Jan 2011
    Last Online
    Yesterday @ 10:18 PM
    Location
    Preston County WV
    Posts
    13,494
    Thanks
    3,299
    Thanked 2,498 Times in 1,610 Posts
    Agree, get it replaced now NOT LATER. Also the bracket that hold the fan to driveshaft make sure it does not turn when you try and turn the fan by hand (well whats left of your fan.)
    If its OK after unbolting the fan then cut it so it is in two pieces comes right off then . You can do the same to the new fan. Do a search on forum on replacing fan on 2220-2305. 15-30 mins job.
    Superglidesport likes this.
    Gene

    Have fun and be safe !!!
    USAR 8yr 8 mo SSG 99th ARCOM
    JD 1025R, H120 FEL 54" bucket, 54" mmm Auto Conn, 54" Front blade, JD back hoe ,JD IMatch, 48" Bush Hog tiller, Middlebuster from MF dealer, used King Kutter 5' rear blade, a new 47" JD Front blower and Original Tractor cab w/heater.
    We have a Red Honda Pioneer 700-4 (4 seater) w/soft top , doors, and winch.

  8. Top | #6

    Join Date
    May 2013
    Last Online
    Yesterday @ 08:42 PM
    Location
    Vermont
    Posts
    118
    Thanks
    5
    Thanked 11 Times in 11 Posts
    I pulled my fan off without cutting it. Just sort of walked the blades over the support bar. My fan bracket was shot. Splines sheared. Good time to lube the driveshaft ujoints while it's out too.


    Sent from my iPhone using Tapatalk

  9. Top | #7

    Join Date
    Jul 2016
    Last Online
    Today @ 12:55 AM
    Location
    upstate, New York
    Posts
    46
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Just did mine to the 2110 I bought beginning of the summer. Thankfully for this site as I read everything to look for. And mine was same as yours not a blade left on it. As said about removing the four screws from the old was the hardest part.

    Once they where removed, cut the new fan in half. Making sure to have two screw holes on each half. Fit over coller on the shaft and tighten each half at a time. The second half is vary helpful to have a long wobble extention for your socket. As stated above I believe the fan cost was 30 bucks from mother deere in town. Way less expensive then a failure on your hydrostatic transmission.

    Sent from my SM-N910V using Tapatalk

  10. Top | #8

    Join Date
    Aug 2016
    Last Online
    10-29-2017 @ 10:36 PM
    Location
    fairhaven, mass
    Posts
    26
    Thanks
    11
    Thanked 1 Time in 1 Post

    ok take a look

    Quote Originally Posted by chad05gsa View Post
    Just did mine to the 2110 I bought beginning of the summer. Thankfully for this site as I read everything to look for. And mine was same as yours not a blade left on it. As said about removing the four screws from the old was the hardest part.

    Once they where removed, cut the new fan in half. Making sure to have two screw holes on each half. Fit over coller on the shaft and tighten each half at a time. The second half is vary helpful to have a long wobble extention for your socket. As stated above I believe the fan cost was 30 bucks from mother deere in town. Way less expensive then a failure on your hydrostatic transmission.

    Sent from my SM-N910V using Tapatalk

  11. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •