-John Deere 3720 Deluxe Cab TLB
FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
-John Deere 455 w/60" MMM
Bolt on Grab Hooks and other cool stuff are now for sale!!
Visit our YouTube Channel
John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
Artillian 3K Forks, Grapple, Front-Hoe Bucket
John Deere 455, 60" MMM
While you are inspecting parts around the front left wheel, make sure your tire is not rubbing the powersteering hose when you do a full turn left I think it was. A bunch of us had this problem with older units. Not sure if they have rerouted it or tied it back so the tire didn't catch it.
2014- JD 1025r
L120 59" FEL, 260 BH, 60D MMM
66"/54" plow with Artillian extension and rubber edge
Artillian 36" forks
JD 550 3PT Tiller
54" spike aerator
Fimco 3PT 40 gal boom sprayer
CMP 3PT 60" Dethatcher
51" Lucknow 3PT rear snowblower
Omni Transformer 3PT weight rack w/ 2" hitch receiver 6-42lbs weights
Thanks for the lead Ken, that is it. Can't figure out how a new one or the old one would go on. The rod has the press fit bearing in the knuckle but the rod going into the knuckle would prevent any boot from sliding on without a notch. The one that fell off has no notch. I am wondering if was just cut and placed there at the factory and that's why it fell off. Hoping someone with a 1025 can post a pic with the original boot in place.
Last edited by Firemark; 08-30-2016 at 03:27 PM.
To replace it, you have to remove the tie rod end from the steering knuckle.
Your mileage may vary.
Some other stuff
YouTube- Life in Wyoming
2014 1025R, H120 loader w/53" bucket and Heavy Hitch Tooth Bar, 54" Auto Connect MMM, 47" QH snow blower, Ballast box and loaded rear tires, Speeco Quick Hitch, Ken's Bolt-on Grab Hooks, King Kutter Carry All, 54" front QH blade w/Heavy Hitch skids, Titan 36" pallet forks, Land Pride GS0560 Grading Scraper, and chrome (kitchen drain pipe) exhaust tip!!
1950 Allis-Chalmers B, Electric start, PTO, Belt Pulley, Hydraulic pump. Stuck engine (a work in progress)
Incredible..this boot seems to be failing constantly...
2015 1025R w/ H120 Loader, 60D MMM AutoConnect, 54" QH Snowblower & Titan Pallet Forks
Thanks everyone for the pics and info. Another New JD headache ! Almost tempted to let it go. If the boot was that sh$&ty of a fit it probably wasn't doing much good anyway. My 1025 is only a few months old so guess it's back to th dealer circus.
Bought my 1026 in the spring of 2013 and so far haven't had one fail on me.
1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --
Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1˝" rear wheel spacers.
NRA Life Member
I haven't had one fail either , but I have seen several threads of owners with this issue . Hope it works out at the dealer .
2016 1025R SILB (Self Installed Loader Backhoe)
54 Autoconnect MMM
Several homemade Mods
Ken's bolt on grab hooks combo , Diff lock pedal , Oblong slings , Backhoe Steps
Piranha tooth bar
Armstong Ag 4' Box Blade
Fimco 40 gal. 3 pt. sprayer
Blue Hawk (?) Plug Aerator
Power Flow 14 Bushel Bagger
Jeff's LED Taillights
JD Mulch Kit
42 Hyd. Tiller