Cutting it close
Results 1 to 4 of 4
Like Tree9Likes
  • 7 Post By AdamT1222
  • 1 Post By AdamT1222
  • 1 Post By Levi

Thread: Cutting it close

  1. Top | #1

    Join Date
    Aug 2015
    Last Online
    09-24-2019 @ 06:14 PM
    Location
    Manitoba Canada
    Posts
    40
    Thanks
    42
    Thanked 4 Times in 4 Posts

    Cutting it close

    2 weeks ago I was tilling and noticed one arm was dragging. After looking at it and calling the dealer found out it was the rockshaft. Was told it was somewhat common. Next step was to look at this forum and find out more info. Read up and was about to fix it. Bought a new snap ring and asked the dealer if I still had warranty. Totally thought it was up. Well found out I had 54 days left! Yes and after reading other threads fixed the instrument cluster as well. Thanks again members! Now is there more common warranty issues that I should go after?
    Gizmo2, HydroHarold, Levi and 4 others like this.
    2014 1025r, H120 FEL, 48" frontier box blade, 3pt frontier SB1148, 647 Tiller, 60D MMM ,I Match. 2005 Cub Cadet 1050, Stihl Kombi.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2

    Join Date
    Sep 2015
    Last Online
    Yesterday @ 10:38 PM
    Location
    Burton, Ohio
    Posts
    2,757
    Thanks
    542
    Thanked 440 Times in 348 Posts
    Have them give a good look at all the drive shafts and universal joints. Any hydraulics cylinders leaking down rapidly? Maybe ask them to check the hydraulic system pressure for the heck of it as well.
    1025R FILB, vintage: 2015
    54D MM mowing deck
    Imatch hitch
    2 inch receiver for three point
    "18" cart
    Piranha Tooth Bar
    Ken's hooks and differential lock pedal
    Artillian 36" forks
    Stihl equipment: Saws; MS261C, MS462C, MS661RCM and Blower; BR600 and Trimmer; FS70R and Hedge Cutter; HL 56K and Pressure Washer; RB400
    Husky log splitter

  4. The Following User Says Thank You to Jeff B For This Useful Post:

    AdamT1222 (09-12-2016)

  5. Top | #3

    Join Date
    Aug 2015
    Last Online
    09-24-2019 @ 06:14 PM
    Location
    Manitoba Canada
    Posts
    40
    Thanks
    42
    Thanked 4 Times in 4 Posts
    Forgot to add only had 78hrs on it.
    Levi likes this.
    2014 1025r, H120 FEL, 48" frontier box blade, 3pt frontier SB1148, 647 Tiller, 60D MMM ,I Match. 2005 Cub Cadet 1050, Stihl Kombi.

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 08:05 AM
    Location
    NE Tenn.
    Posts
    10,154
    Thanks
    2,990
    Thanked 1,899 Times in 1,065 Posts
    Was going to add to have them check the linkage to the MMM deck but don't know if you have one. Look at that, I did mention it.
    romcjr likes this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1½" rear wheel spacers.
    NRA Life Member

  8. The Following User Says Thank You to Levi For This Useful Post:

    AdamT1222 (09-13-2016)

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •