tapping into spare aux lights on the back of the 1025r
Results 1 to 6 of 6
Like Tree1Likes
  • 1 Post By RandyM

Thread: tapping into spare aux lights on the back of the 1025r

  1. Top | #1

    Join Date
    Mar 2015
    Last Online
    01-26-2019 @ 12:01 AM
    Location
    finger lakes, ny
    Posts
    424
    Thanks
    7
    Thanked 45 Times in 38 Posts

    tapping into spare aux lights on the back of the 1025r

    So, looking to get the work light set up before winter hits. I found the wires, but the ends are capped with a long rubber thing on each lead. Is this just a boot? Can it slide off? Or do I need to snip the wire off, just under the rubber? Kind of hoping that rubber covers a couple of pin type connectors, but if it doesn't ill just have to throw on some molex ones...

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    RandyM's Avatar
    Join Date
    Sep 2010
    Last Online
    03-14-2017 @ 10:30 AM
    Location
    Stoughton, Wisconsin
    Posts
    6,594
    Thanks
    1,047
    Thanked 1,061 Times in 672 Posts
    The rubber long thing is the connector that you tap into. They take the bullet style connectors. Here is a thread that may help. The two connectors shown in this thread are already connected.

    Auxiliary Lights

    You may have others on the machine that are already connected that you can look at.
    Last edited by RandyM; 10-07-2016 at 02:18 PM.
    ky_shawn likes this.
    Randy __________________________________________________ ___ Be Safe!

    2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
    Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
    60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
    Everything Attachments ETA-PluggerV2-60 Aerator

    The more I learn, the less I know.

  4. Top | #3
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    09-27-2019 @ 05:39 PM
    Location
    NE Tenn.
    Posts
    10,150
    Thanks
    2,988
    Thanked 1,897 Times in 1,064 Posts
    Quote Originally Posted by lewisc1985 View Post
    So, looking to get the work light set up before winter hits. I found the wires, but the ends are capped with a long rubber thing on each lead. Is this just a boot? Can it slide off? Or do I need to snip the wire off, just under the rubber? Kind of hoping that rubber covers a couple of pin type connectors, but if it doesn't ill just have to throw on some molex ones...
    Yes. It's just a boot.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1½" rear wheel spacers.
    NRA Life Member

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4
    romcjr's Avatar
    Join Date
    Jul 2014
    Last Online
    07-30-2019 @ 05:29 PM
    Location
    Waller,TX.
    Posts
    1,121
    Thanks
    122
    Thanked 150 Times in 97 Posts
    Yes , as the others said , they are just caps . You should have one set on each side to tap into . I put one led worklight on the back so I only utilized one set . There are many of us who have done this mod . some wire through a switch to make it separate from the headlight switch . Make it work for you !
    Ron
    2016 1025R SILB (Self Installed Loader Backhoe)
    54 Autoconnect MMM
    JD Imatch
    Several homemade Mods
    Ken's bolt on grab hooks combo , Diff lock pedal , Oblong slings , Backhoe Steps
    Piranha tooth bar
    Artillian forks
    Armstong Ag 4' Box Blade
    Fimco 40 gal. 3 pt. sprayer
    Blue Hawk (?) Plug Aerator

    2016 x580
    Power Flow 14 Bushel Bagger
    Brushguard
    Jeff's LED Taillights
    JD Mulch Kit
    42 Hyd. Tiller

  7. Top | #5

    Join Date
    Jan 2016
    Last Online
    09-30-2019 @ 01:20 PM
    Location
    MD
    Posts
    362
    Thanks
    2
    Thanked 63 Times in 36 Posts
    One has a dummy male end and the other a dummy female end plugged in. The rubber cap is the way to pull the dummy plugs out.
    2015 1025R FILB, iMatch, 53" Bucket, 54D Mower Deck, 54" Snow Blower, Heavy Hitch Dual Suitcase Weight Bracket, Heavy Hitch Front Weight Bracket, EA 48" Plugger, Garber 48" 3 point Seeder, Kens bolt on hooks, CountyLine (Tarter Gate) 60" box blade, Kenda Terra Trac HDAP tires (front and rear), CozyCab Sunshade, TSC CountyLine (Tarter) 48" yellow rototiller, BXPanded 25 gallon 3PH sprayer.

  8. Top | #6

    Join Date
    Jun 2016
    Last Online
    10-01-2019 @ 09:44 PM
    Location
    Uniontown, Pa
    Posts
    249
    Thanks
    0
    Thanked 39 Times in 31 Posts
    Also if you bought the JD lights there should be a splitter in the box if you want to install rear lights in the future you will plug them into the same place as the forward lights.

  9. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •