1025r Cleaned sediment bowl, now won't start
Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 49
Like Tree159Likes

Thread: 1025r Cleaned sediment bowl, now won't start

  1. Top | #1

    Join Date
    May 2016
    Last Online
    10-17-2019 @ 04:14 PM
    Location
    Kansas
    Posts
    25
    Thanks
    3
    Thanked 9 Times in 2 Posts

    1025r Cleaned sediment bowl, now won't start

    Removed sediment bowl to clean out a little dirt. Reinstalled, opened fuel shut off valve and turned key on for 15 seconds as per manual. Page 10-12. Says it will purge air from bowl. It didn't do anything. Bowl only had about an inch of fuel in it. Tried to start, just sputtered. Took bowl off and filled it with fuel.

    Still won't start. Valve is open and bowl is full of fuel. Just turns over and sputters a little bit.

    Am I missing something??? Directions were simple, but didn't work for me.

    Thanks,
    Corey

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    etcallhome's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 05:14 PM
    Location
    Preston County WV
    Posts
    13,510
    Thanks
    3,302
    Thanked 2,505 Times in 1,614 Posts
    Just turn key on without trying to start the engine. Do this 2-3 times , while doing this you should hear the fuel pump.

    Leave it sit a while and then try to start.

    It should start. One time I changed mine and after doing what you have it finally sputtered. The next day the dealer was picking the tractor up for another issue, ask them to check , they found no problem ran fine till I got rid of the tractor.
    Gizmo2, dieselshadow, Levi and 2 others like this.
    Gene

    Have fun and be safe !!!
    USAR 8yr 8 mo SSG 99th ARCOM
    JD 1025R, H120 FEL 54" bucket, 54" mmm Auto Conn, 54" Front blade, JD back hoe ,JD IMatch, 48" Bush Hog tiller, Middlebuster from MF dealer, used King Kutter 5' rear blade, a new 47" JD Front blower and Original Tractor cab w/heater.
    We have a Red Honda Pioneer 700-4 (4 seater) w/soft top , doors, and winch.

  4. Top | #3
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 01:48 PM
    Location
    Joelton TN
    Posts
    19,930
    Thanks
    1,067
    Thanked 4,329 Times in 2,601 Posts
    Be sure to open the throttle up to about 1/2 or so after letting the fuel pump run a few cycles as Gene mentioned. It will sputter and shake like a dog passing a peach pit for a minute. That's normal, don't panic. Then it'll clear up and run normally.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    May 2016
    Last Online
    10-17-2019 @ 04:14 PM
    Location
    Kansas
    Posts
    25
    Thanks
    3
    Thanked 9 Times in 2 Posts
    Quote Originally Posted by etcallhome View Post
    Just turn key on without trying to start the engine. Do this 2-3 times , while doing this you should hear the fuel pump.

    Leave it sit a while and then try to start.

    It should start. One time I changed mine and after doing what you have it finally sputtered. The next day the dealer was picking the tractor up for another issue, ask them to check , they found no problem ran fine till I got rid of the tractor.

    Turned key on and do not hear fuel pump at all. Sediment bowl will not fill up at all. Pulled fuel filter under left floor board. It was good but now no fuel will flow into it.

    Called service dept and he said probably air in lines. He said to unscrew fuel lines at injectors while cranking engine to relieve air but still not getting any fuel flow.

    Thanks,
    Corey

  7. Top | #5

    Join Date
    Sep 2014
    Last Online
    Yesterday @ 06:32 PM
    Location
    West Michigan
    Posts
    1,919
    Thanks
    95
    Thanked 220 Times in 176 Posts
    Quote Originally Posted by Cbtruckin View Post
    Turned key on and do not hear fuel pump at all. Sediment bowl will not fill up at all. Pulled fuel filter under left floor board. It was good but now no fuel will flow into it.

    Called service dept and he said probably air in lines. He said to unscrew fuel lines at injectors while cranking engine to relieve air but still not getting any fuel flow.

    Thanks,
    Corey
    Not hearing the pump is a problem. Need to check its operation-can you troubleshoot? If not dealer may have to diagnose and repair
    2004-L130

    2013-2032r, Curtis Hard side cab (project), H130 FEL & 61"bucket, Artillian Modular Grapple on HD frame with Diverter, 2300# Artillian frame w/ 36" x 3" tines, 46BH 9" & 13" bucket, Frontier RB1060, HLA 1000 series 60" JDQA Snow plow, JD ballast box, RK QH, Homemade 3pt multi purpose hitch, 117W of extra LED lights on ROPS and side Brush guards, Ken's bolt on hooks-3x, Ideal Knife grooved R-4's.

  8. Top | #6

    Join Date
    May 2016
    Last Online
    10-17-2019 @ 04:14 PM
    Location
    Kansas
    Posts
    25
    Thanks
    3
    Thanked 9 Times in 2 Posts
    Quote Originally Posted by balrog006 View Post
    Not hearing the pump is a problem. Need to check its operation-can you troubleshoot? If not dealer may have to diagnose and repair

    Tried to check fuel pump fuse but it's a big square one so can't tell if it's the fuse. Other than that no fuel will flow. It's under warranty so will call and they can come get it.

    Thanks everyone for the help. It all should have worked.

    Corey
    Levi and bama1025r like this.

  9. Top | #7
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 01:48 PM
    Location
    Joelton TN
    Posts
    19,930
    Thanks
    1,067
    Thanked 4,329 Times in 2,601 Posts
    The fuel pump makes a clicking sound when running. It's right behind the engine inline with the fuel supply line. Turn the key on and listen. What do you get?
    BigJim55 likes this.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  10. Top | #8

    Join Date
    May 2016
    Last Online
    10-17-2019 @ 04:14 PM
    Location
    Kansas
    Posts
    25
    Thanks
    3
    Thanked 9 Times in 2 Posts
    I do hear a couple clicks when key is on.

  11. Top | #9
    Keeper of the GTT Cookies dieselshadow's Avatar
    Join Date
    Nov 2011
    Last Online
    Today @ 01:48 PM
    Location
    Joelton TN
    Posts
    19,930
    Thanks
    1,067
    Thanked 4,329 Times in 2,601 Posts

    1025r Cleaned sediment bowl, now won't start

    Good. Do this a bunch of times and give her a whirl.
    - Jason

    GreenTractorTalk.com Rules, Policies, and Terms of Use

    Subscribe to dieselshadowman on YouTube

    2720 w/ 200CX FEL
    , Ken's weld-on hooks, Fit Rite Hydraulics Top and Tilt kit, Artillian forks.
    1954 60 - getting full restoration, 1964
    110 round fender in the shop for crustoration
    Ferris IS3200Zzero turn mower

    Quote Originally Posted by Gizmo2 View Post
    Dieselshadow is my Hero.


  12. Top | #10

    Join Date
    May 2016
    Last Online
    10-17-2019 @ 04:14 PM
    Location
    Kansas
    Posts
    25
    Thanks
    3
    Thanked 9 Times in 2 Posts
    Just turn the key on or crank the engine?
    Thanks

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 5 1 2 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •