1025r Front Fenders
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
Like Tree61Likes

Thread: 1025r Front Fenders

  1. Top | #1

    Join Date
    Aug 2015
    Last Online
    12-21-2017 @ 12:07 PM
    Location
    Hanover Michigan
    Posts
    17
    Thanks
    0
    Thanked 5 Times in 5 Posts

    1025r Front Fenders

    OK, So..... I have been looking everywhere trying to find a set of front fenders for my 1025r .... I did find on another forum where a guy built his own set. So that is what i have started!!! Yesterday I spent a little time down at the shop fabricating up some custom brackets. I ordered a set of plastic fenders for the x729 (no brackets) and picked up some square stock. I got one side built yesterday (still have to grind the welds and paint) and i am pretty happy with the fit! I plan on finishing the other side one night this week! I know the rules, its not true unless you have pictures!! So that being said when i get back in the shop i will snap a couple for you guys to check out! I am just so excited about this i had to share!! Pics will be coming soon!!!
    RandyM, fdmars, pcabe5 and 10 others like this.

  2. The Following User Says Thank You to GreenGuy4life For This Useful Post:

    ColonyPark (10-31-2016)

  3. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  4. Top | #2
    Corndog Hater ColonyPark's Avatar
    Join Date
    Aug 2011
    Last Online
    Today @ 10:54 AM
    Location
    WNY
    Posts
    10,704
    Thanks
    3,579
    Thanked 1,143 Times in 974 Posts
    Can't wait for the pics, this is definitely a mod I would like to add
    pcabe5, Levi and BigJim55 like this.
    Jamie

    2011 JD 1026R - w/60" NON-AutoConnect MMM, FEL w/WR Long Toothbar, 47" Front Mount Snowblower, 54" Front Mount Blade w/ Rubber Edge, 48" KingKutter Tiller & Brush Hog, CountyLine Carry All and CountyLine 60" Rear Blade, Pat's EZ-Change Quick Hitch System
    1990 JD 185 - 46"MMM w/Power Flow Bagger

  5. Top | #3
    TJR345's Avatar
    Join Date
    Jan 2016
    Last Online
    Today @ 03:11 PM
    Location
    Area 51 in Cambria,NY
    Posts
    3,774
    Thanks
    415
    Thanked 480 Times in 371 Posts
    I have them on my x595 and they are very helpful in situations,heck they have them for the bigger Ag tractors.Here's what they look like from a guy that built them also.I like the look of them.Dealer told me 1025R can't have front fenders - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information
    Tom

    2019 X590 with power mulch control and PF bagger
    30" mechanical tiller
    02 X595 with 62" deck,front thatcher and powerflow PTO kit
    3pt hitch with Heavy Hitch 45 JD loader
    12 JD suitcase weights
    JD/Brinly 3pt plow
    Frontier SS1036 3pt pto spreader
    (2) JS63C walk behind mowers
    TS 105 JD weed wacker
    tow behind 15 gal. sprayer
    Turftime 60" lawn roller
    Turftime 54" 3pt core aerator

  6. The Following User Says Thank You to TJR345 For This Useful Post:

    ColonyPark (11-01-2016)

  7. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  8. Top | #4
    TickTock's Avatar
    Join Date
    Sep 2015
    Last Online
    @
    Location
    No longer here
    Posts
    592
    Thanks
    17
    Thanked 50 Times in 42 Posts
    Is it possible to remove and install the drive-over deck with fenders?
    BigJim55 likes this.

  9. Top | #5

    Join Date
    Aug 2015
    Last Online
    12-21-2017 @ 12:07 PM
    Location
    Hanover Michigan
    Posts
    17
    Thanks
    0
    Thanked 5 Times in 5 Posts
    Quote Originally Posted by TJR345 View Post
    I have them on my x595 and they are very helpful in situations,heck they have them for the bigger Ag tractors.Here's what they look like from a guy that built them also.I like the look of them.Dealer told me 1025R can't have front fenders - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information
    Yes this is where I got the idea!! My brackets are slightly different but the exact same concept!!
    BigJim55 likes this.

  10. Top | #6

    Join Date
    Aug 2015
    Last Online
    12-21-2017 @ 12:07 PM
    Location
    Hanover Michigan
    Posts
    17
    Thanks
    0
    Thanked 5 Times in 5 Posts
    Quote Originally Posted by TickTock View Post
    Is it possible to remove and install the drive-over deck with fenders?
    Yes the drive over deck will not be an issue.... I made sure my spacing was good on the tire to still get to the deck before the fender does... I also have made sure that i do not loose any steering on them...
    Levi likes this.

  11. Top | #7
    RandyM's Avatar
    Join Date
    Sep 2010
    Last Online
    03-14-2017 @ 10:30 AM
    Location
    Stoughton, Wisconsin
    Posts
    6,594
    Thanks
    1,047
    Thanked 1,062 Times in 673 Posts
    Quote Originally Posted by GreenGuy4life View Post
    Yes the drive over deck will not be an issue.... I made sure my spacing was good on the tire to still get to the deck before the fender does... I also have made sure that i do not loose any steering on them...


    Sooooooo, when do we get to see 'em?
    pcabe5, ColonyPark, Levi and 2 others like this.
    Randy __________________________________________________ ___ Be Safe!

    2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
    Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
    60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
    Everything Attachments ETA-PluggerV2-60 Aerator

    The more I learn, the less I know.

  12. Top | #8

    Join Date
    Oct 2016
    Last Online
    10-10-2017 @ 06:02 AM
    Location
    NE
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I found a 1025r with front fenders when I was looking for a tractor.
    Attached Thumbnails Attached Thumbnails fender.jpg  
    pcabe5, ColonyPark, Levi and 3 others like this.

  13. Top | #9
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Today @ 06:39 PM
    Location
    Westminster, MD
    Posts
    16,415
    Thanks
    5,046
    Thanked 4,079 Times in 2,545 Posts
    An older thread on 1-series fenders, it has a few other links as well in post #3:

    http://www.greentractortalk.com/foru...t-fenders.html
    pcabe5, ColonyPark, Levi and 1 others like this.
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  14. Top | #10

    Join Date
    Aug 2015
    Last Online
    12-21-2017 @ 12:07 PM
    Location
    Hanover Michigan
    Posts
    17
    Thanks
    0
    Thanked 5 Times in 5 Posts
    So i have been super busy with work and the nice weather helping the faimly farm get in harvest.... I have one side made but not the other but i wanted to get a pic up of the bracket that is done....Click image for larger version. 

Name:	front fender.jpg 
Views:	27 
Size:	51.9 KB 
ID:	264401 .... I will get finished pictures up as soon as I can!!
    RandyM, Gizmo2, pcabe5 and 4 others like this.

  15. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •