1025R air canister strap
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
Like Tree20Likes

Thread: 1025R air canister strap

  1. Top | #1

    Join Date
    Jun 2016
    Last Online
    10-21-2019 @ 01:16 PM
    Location
    Sterling Heights, Michigan
    Posts
    60
    Thanks
    2
    Thanked 3 Times in 3 Posts

    1025R air canister strap

    Bought my tractor in June, couldn't run it much because of work and other item for a whole Month drove me nuts. till about end of July. Did my 50 hour service on the tractor and i being mechanical i check everything out. During my checks i discovered the strap broke. first two picture show strap standing up in the picture. The last picture shows the canister worn against the inlet air hose.

    Has anybody else had this issue? contacted dealer for warranty. should her from him Monday.

    Click image for larger version. 

Name:	IMG_2703.jpg 
Views:	37 
Size:	69.5 KB 
ID:	263625
    Click image for larger version. 

Name:	IMG_2705.jpg 
Views:	38 
Size:	73.4 KB 
ID:	263633
    Click image for larger version. 

Name:	IMG_2710.jpg 
Views:	37 
Size:	48.9 KB 
ID:	263641
    John Deere 2016 1025 R with R3 Turf Tires, LED Work Lights, Rear 3rd selective vavle
    60 D mower With Mulch Kit with Independent lift
    H120 Loader with AF 12 Forks
    Rear Ballast Box, Front weights 5 at 42 LBS each
    Quick I-Match with 3pt tractor receiver.
    Land Pride RB 1660 with Hydraulic angle
    Tractor Supply RT4 Tractor Line Rototiller Tarter Equipment.
    54" Quick connect Front Blade, Snow Thrower.



    Replaced 128 and 149 1970's Cub Cadets.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    ddinham's Avatar
    Join Date
    May 2013
    Last Online
    Today @ 12:44 PM
    Location
    Eastern Kansas
    Posts
    3,613
    Thanks
    167
    Thanked 500 Times in 383 Posts
    I had the same thing happen on my 1025R when I had it. Dealer replaced it under warranty.

    Dave
    Levi and Marlin like this.
    JD 4066R CAB
    JD H180 FEL with SSQA brackets, JD iMatch, JD Ballast Box & ext, JD pull behind seed spreader
    Frontier RB2196H 8 ft rear blade/hyd angle, Frontier BB1065 Box Blade, Befco 3pt 110 inch RFM
    48" pallet forks, KK 3pt Boom Pole, Northern Tool 3pt middle buster, 2 bottom Dearborn plow
    County Line post hole digger, Rhino 3pt 10ft brush hog, Land Pride 8ft rock rake
    Fit Rite Hydraulics 3pt Top Link, front 3pt adapter for SSQA, 7 1/2 ft Field Roller, 8ft Dearborn tandem disk

  4. Top | #3
    jgayman's Avatar
    Join Date
    Jul 2012
    Last Online
    Today @ 12:11 PM
    Location
    Central Pennsylvania
    Posts
    10,083
    Thanks
    371
    Thanked 1,668 Times in 1,263 Posts
    That strap is $20 (LVA16535).
    Levi likes this.
    2012 2720 -- 200CX Loader -- 54" Quick Attach Snow Blower -- Frontier LR5060 Rake -- Land Pride RB1660 Blade (Hydraulic Angle) -- Artillian 42" Forks -- Ken's Bolt on Grab Hooks -- Fit Rite Hydraulic top-link -- 2013 X500 for mowing duties

  5. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  6. Top | #4

    Join Date
    Dec 2013
    Last Online
    02-02-2019 @ 08:17 AM
    Location
    Manteno, IL
    Posts
    149
    Thanks
    6
    Thanked 8 Times in 8 Posts
    this is one of the lesser design areas IMO. My canister mount bracket bolts came loose. Tighten them, and there was still enough shaking to begin to wear through the rubber straps. Ended up putting a thin layer of packing foam wrap between the canister and the mount.

    Sent from my SAMSUNG-SGH-I257 using Tapatalk
    Levi, Marlin and Drifterbike like this.
    Al

    Swisher T60 trailmower; 2013-05 1025R, H120 FEL, Frontier 48" Box Blade; fixed DBS/FBS; psrumor seat springs; QA plow; suitcase weights; Pihrana tooth bar, Ken's "I'm hooked!" bolt-ons, SpeeCo quick-hitch; Fimco 40gal 3pt sprayer, EMP pallet fork bracket, Artillion 42x3" forks, 3pt boom hoist, 54" quick attach plow

    still less tweaks than the motorbike has, but a whole different version of seat time fun at 1/10 the speed.

  7. Top | #5
    cheesetrain's Avatar
    Join Date
    Jan 2011
    Last Online
    Today @ 12:04 PM
    Location
    Beaver Dam, WI
    Posts
    1,911
    Thanks
    85
    Thanked 174 Times in 149 Posts

    1025R air canister strap

    I had the bolts come loose on mine as well. The strap on mine is stretched out, probably from when the bolts were loose. Looking to get it replaced before the snow flies. Might just wrap a short bungee cord all the way around and call it an improvement.


    Sent from my iPhone using Tapatalk
    Last edited by cheesetrain; 11-06-2016 at 08:07 PM.
    Levi, Marlin and Drifterbike like this.
    1025R w\ block heater and one rear work light
    H120 FEL w 53" bucket, 54" QH blade, 60" MMM w\ autoconnect, mulch kit and independent lift kit
    JD 3 bag MCS with powerflow
    Land Pride RTA1250 tiller and CA1556 core aerator
    Imatch Quick Hitch
    JamisonBryce MCS Imatch adapter
    Heavy Hitch weight bracket & sub soiler combo
    CMP Attachments 60" HD front dethatcher
    Garber 72" 3pt mount drop spreader
    Countyline 3pt PHD with 9" diameter auger

  8. Top | #6
    John Deere 1025R TLB's Avatar
    Join Date
    Jan 2014
    Last Online
    Today @ 12:55 PM
    Location
    Scranton, PA Area
    Posts
    2,451
    Thanks
    114
    Thanked 169 Times in 157 Posts
    yeah, loose bolts and broken strap. Found a bungee cord the right length and use that instead. No more rattle, no more wear. Did a minor change to the bracket. Had pics but lost um. Not going out as I have pneumonia. Pretty easy to fix, pretty easy to figure out too.
    Levi, hemi225, Marlin and 1 others like this.
    MY2013 1025R TLB
    47" 2 stage front QT Snow Blower
    647 Tiller
    54D QT mowing deck W/ independent lift
    120H FEL W/ 49 in bucket
    260 BH W/ 12" bucket
    Homemade 10 Kw PTO Driven Generator (Timing Belt Driven 2000RPM input, from front PTO)
    1972 Homelite XL12 inherited from Dad going strong!
    Stihl FS90 String Trimmer
    Mantis Rotary Tiller
    ABI 5ft. Heavy Duty Landscape Rake

  9. Top | #7
    AJgrn78's Avatar
    Join Date
    Feb 2016
    Last Online
    Yesterday @ 09:37 PM
    Location
    Buffalo, NY
    Posts
    1,266
    Thanks
    14
    Thanked 92 Times in 85 Posts
    if mine breaks it's getting a bungee strap.
    Levi and Marlin like this.

  10. Top | #8

    Join Date
    Mar 2016
    Last Online
    Today @ 03:31 AM
    Location
    TN
    Posts
    200
    Thanks
    9
    Thanked 27 Times in 18 Posts
    Mine broke too. A pretty ridiculous design IMHO
    hemi225 and Marlin like this.

  11. Top | #9

    Join Date
    Sep 2016
    Last Online
    05-12-2019 @ 08:05 PM
    Location
    Indiana
    Posts
    66
    Thanks
    0
    Thanked 5 Times in 5 Posts
    I had a similar issue on my new 1025R. I heard a sharp vibration noise coming from the area of the air cleaner canister. Upon inspection I found that the strap did not hold the canister tight and it was making an awful vibration noise. The strap was installed but the canister was vibrating, a lot. I took a piece of an old motorcycle inner tube and made a sleeve that stretched over the mount below the canister. After reinstalling the strap, no more noise. Canister was firmly held in place. This is just a minor variation on solutions already mentioned.

  12. Top | #10
    Bonehead Club Lackey Levi's Avatar
    Join Date
    Jul 2013
    Last Online
    Yesterday @ 09:41 AM
    Location
    NE Tenn.
    Posts
    10,155
    Thanks
    2,990
    Thanked 1,901 Times in 1,066 Posts
    Had a strap like that on the 2210 I had. Never had any trouble on it. My 1026 doesn't have a strap. It's held in place with a metal rod. 1025 needed a new design because the one on the 1026's worked. I also have a air filter gauge telling me when to replace the filter. So far everything works.

    You know the saying, "if it works, fix it".
    RandyM and RetiredDoc like this.
    1026R -- 60D mmm -- H120 Loader -- Curtis 150 Tiller -- DR 3 point Chipper -- Howse Middle Buster -- Brinly 16 Blade Disk -- Kodiak 5' Box Blade -- 12-42 lb. suitcase weights -- Lawn roller -- Upgraded seat springs from psrumors -- Kennyd's bolt on hooks & clevis -- BXpanded tooth bar -- CMI 6' wagon -- Heavy Hitch Cultivator /garden bedder / hiller attachments --

    Donated by some great people/vendors on here: 72 lb. wheel weights -- Bro-Tek 1½" rear wheel spacers.
    NRA Life Member

  13. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •