Just wanted to see if I'm to only person that is losing the fiber/plastic washer located behind the stop on the rockshaft control arm. By the way this is on a 1025r and if your control arm drifts down on it's own; most likely your washer is missing . If you look at the parts breakdown you would have a locking nut, 4 friction washers, a stop, and this fiber or plastic washer, they are all aligned on the control shaft that lowers and rises the rockshaft.
So anyway I some how break one every year (about 100 hours). Its not all that hard to replace but I'm lazy and would think they should last for years.