Wire Help Needed
Results 1 to 6 of 6
Like Tree1Likes
  • 1 Post By Billy Cravens

Thread: Wire Help Needed

  1. Top | #1

    Join Date
    Jan 2017
    Last Online
    01-18-2017 @ 08:29 PM
    Location
    PA
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Wire Help Needed

    I need help. I'm trying to run a separate switch so I can turn rear lights on/ off independently from other Auxiliary lights. Also trying to run wiring for rear receiver winch on 1025r. How do you remove floor board or drive shaft tunnel to run wiring. Trying to do it the right way first. Any suggestions would be great. Thanks.

  2. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  3. Top | #2
    Captain Hook Kennyd's Avatar
    Join Date
    Aug 2010
    Last Online
    Yesterday @ 08:15 PM
    Location
    Westminster, MD
    Posts
    16,400
    Thanks
    5,043
    Thanked 4,079 Times in 2,545 Posts
    Quote Originally Posted by Brendan noto View Post
    I need help. I'm trying to run a separate switch so I can turn rear lights on/ off independently from other Auxiliary lights. Also trying to run wiring for rear receiver winch on 1025r. How do you remove floor board or drive shaft tunnel to run wiring. Trying to do it the right way first. Any suggestions would be great. Thanks.
    Welcome Brendan,
    I would be best to start your own thread on this please
    Kenny

    -John Deere 3720 Deluxe Cab TLB
    FEL, MMM, Artillian 42" Forks and Modular Grapple, I-Match, Ballast Box, and lots of other STUFF.
    -John Deere 455 w/60" MMM


    Bolt on Grab Hooks and other cool stuff are now for sale!!

    Visit our YouTube Channel

    My Equipment:
    John Deere 3720 Deluxe Cab, 300cx FEL, 366 Front Blade, 59" Front Snowblower, Ballast Box
    Artillian 3K Forks, Grapple, Front-Hoe Bucket
    John Deere 455, 60" MMM

  4. Top | #3
    RandyM's Avatar
    Join Date
    Sep 2010
    Last Online
    03-14-2017 @ 10:30 AM
    Location
    Stoughton, Wisconsin
    Posts
    6,594
    Thanks
    1,047
    Thanked 1,061 Times in 672 Posts
    Quote Originally Posted by Kennyd View Post
    Welcome Brendan,
    I would be best to start your own thread on this please
    I can help with that, done.
    Randy __________________________________________________ ___ Be Safe!

    2009 - 2305 w/62 MMM **** 2008 - 2520 w/72 MMM **** 200CX w/49 bucket
    Weight Box w/extension ***** LandPride RTR 1558 Tiller ******* 54 Snow blower
    60 Gallon Demco Sprayer *** 60 Broom ** BB2060 Box Blade**SS2036B Spreader
    Everything Attachments ETA-PluggerV2-60 Aerator

    The more I learn, the less I know.

  5. The Following User Says Thank You to RandyM For This Useful Post:

    Kennyd (01-16-2017)

  6. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

  7. Top | #4
    romcjr's Avatar
    Join Date
    Jul 2014
    Last Online
    10-06-2019 @ 04:17 PM
    Location
    Waller,TX.
    Posts
    1,121
    Thanks
    122
    Thanked 150 Times in 97 Posts
    Quote Originally Posted by Brendan noto View Post
    I need help. I'm trying to run a separate switch so I can turn rear lights on/ off independently from other Auxiliary lights. Also trying to run wiring for rear receiver winch on 1025r. How do you remove floor board or drive shaft tunnel to run wiring. Trying to do it the right way first. Any suggestions would be great. Thanks.


    The veterans will get you up and running !!!
    Ron
    2016 1025R SILB (Self Installed Loader Backhoe)
    54 Autoconnect MMM
    JD Imatch
    Several homemade Mods
    Ken's bolt on grab hooks combo , Diff lock pedal , Oblong slings , Backhoe Steps
    Piranha tooth bar
    Artillian forks
    Armstong Ag 4' Box Blade
    Fimco 40 gal. 3 pt. sprayer
    Blue Hawk (?) Plug Aerator

    2016 x580
    Power Flow 14 Bushel Bagger
    Brushguard
    Jeff's LED Taillights
    JD Mulch Kit
    42 Hyd. Tiller

  8. Top | #5

    Join Date
    Feb 2012
    Last Online
    04-26-2019 @ 06:43 PM
    Location
    Portageville, Missouri
    Posts
    207
    Thanks
    5
    Thanked 48 Times in 39 Posts
    use a 10mm wrench and a Phillips screwdriver to remove the plastic cover under the front of the seat. Remove the engine side panels. Use Phillips screwdriver to remove the kick panel under the key switch. Then use a socket to remove the bolts from the floorboard. It will then come off.

    I installed a rocker switch on the left side of the dash right above the kick panel and picked up 12 volts from the red wire inside the dash that is used for the deck lift switch when that option is installed. I then ran a wire from the output of the switch to the rear of the machine where my rear light is mounted. It's a good time to do this while the floor is off.

    I mounted all of my winch electrical inside the plastic toolbox and drilled holes in the corner of the box to run the cables from the contactor to the winch. I ran one cable from the battery all the way to the winch contactor. I installed a master disconnect next to the battery to kill power when not in use. I grounded the contactor to one of the toolbox mounting bracket bolts. I have a 4ft wiring harness on my rocker switch and just open the toolbox and then hold the rocker switch in my hand when in use.
    keane likes this.

  9. Top | #6
    56Nine's Avatar
    Join Date
    May 2015
    Last Online
    Yesterday @ 12:33 PM
    Location
    Alleman, IA United States
    Posts
    707
    Thanks
    30
    Thanked 212 Times in 116 Posts
    Quote Originally Posted by Brendan noto View Post
    ...How do you remove floor board or drive shaft tunnel to run wiring.
    Maybe this will help...
    Click image for larger version. 

Name:	platform_removal.png 
Views:	61 
Size:	371.5 KB 
ID:	299289
    Darwin
    1025r -> 60D Auto Connect MMM; H120 FEL, 53" bucket, KBOH (3), shackle backer (3), bolt on replaceable cutter; Frontier SB1154; 5' king cutter box blade; king cutter 3pt trailer mover; JD ballast box; 1.25" rear wheel spacers, 40 gallon Fimco sprayer, 52" Ohio Steel lawn sweeper, 3pt King Kutter Poly Fertilizer spreader.

  10. Remove Advertisements
    GreenTractorTalk.com
    Advertisements
     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •