Last edited by Bubber; 05-09-2017 at 03:17 PM. Reason: Spelling is hard.
How about this handle from Grainger?
2016 1025r FILB with fender lights.
ROPS Mounted Roof.
60" MMM with AutoConnect.
48" Frontier Box Blade.
48" Frontier Bush Hog.
36" Artillian Forks with 3K capacity fork frame.
49" FEL Bucket.
Ken's Bolt-On Hook and Clevis pairs (2).
BXpanded Piranha Tooth Bar.
Heavy Hitch Receiver Hitch And Suitcase Weight Bracket.
Six 42-pound weights.
Heavy Hitch 28 inch Ripper/Sub-Soiler/Middle Buster.
2013 Polaris Ranger 800 EFI.
NRA Life Member.
FIind someone who can weld pot metal
I can't read the model number in your picture. Is it possibly a DF16 model Daytona? If so, the same drill press was marketed for a pretty long time and with a few other brand labels on it. I had a used one for a while but sold it for $50 during one of my moves. One of the other identical brands may have a parts stock site.
Model number is kind of generic, as it probably means (D)rill press, (F)loor model, (16) speed, so someone else may use the same model number for a different machine. One brand of DF16 may, or may not be, identical to yours.
That's the exact same drill press as my old Craftsman, I know who built it for Craftsman now.
Here is the Craftsman manual with some part numbers, don't know if it will help you much because of the shape
Sears is in:
Had trouble sizing scans, you should be able to see something now.
Last edited by Old Cajun; 05-09-2017 at 06:33 PM.
2019 4066R with cab (aka Cooterpiller), 2014 997 Z Trak
Other equip: 1982 IH 274 diesel, 1957 Farmall Cub, Woods Billy Goat 5 foot rotary cutter, Ford three point hitch 6 foot dozer blade,
home brew dirt and gravel grader, dirt scoop, choppers, Woods six foot belly mount sickle bar, home brew 3PH 25 gallon sprayer, 1992 33 inch cut Snapper
rear engine rider, 1984 30 inch cut Snapper rear engine rider.
Thanks for the replies. It does look exactly like the Craftsman. That's not surprising. I ordered a Craftsman handle, I'm sure that I can make it work if it isn't exact.